• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.213-216
• /
• 2005

The time synchronization method for Multi-band UWB systems is proposed. We analyze the performance in symbol synchronization using a training symbol with two identical halves. The two halves of the training symbol are made identical by transmitting a modulated sequence on the even frequencies, while zeros are used on the odd frequencies.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.249-254
• /
• 2014

Wireless LAN system is evolving toward high-speed data transmission and more accurate channel estimation is necessarily required to improve communication performance. The PLCP preamble field in IEEE 802.11 based wireless MODEM consists of ten short symbols and two long symbols and is used for synchronization and channel estimation. The existing least square (LS) channel estimation is based on only two long training symbols. After estimating channel response separately by using each long training symbol, the final channel estimation is obtained by the average of each estimation. In this paper, a new channel estimation algorithm is presented to improve the performance of the existing LS channel estimation algorithm. From the fact that the short training symbol consists of 12 non-zero subcarriers, it gives us a clue of being able to additionally estimate at least one fourth of channel coefficients. The new LS algorithm performs channel estimation based on both two long training symbols and a short training symbol. The proposed LS algorithm shows a little bit performance improvement over the existing LS estimation and it will be able to be applied to the IEEE 802.11p WAVE system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.157-165
• /
• 2004

The synchronization algorithm of IEEE 802.11a WLAN(Wireless Local Area Network) has three consecutive processes, which use a short code training symbol, a long code training symbol and a pilot symbol respectively. But in using this synchronization processes, the actual embodiment has two problems. First, the synchronization process has the complex structure using a long code training symbol and a pilot symbol. Second, since the long training symbol is only compensated with the offset correction coefficient, it can not be trusted perfectly. If the equalizer coefficient is obtained in this unstable period, the system performance is degraded. In particular, the system performance becomes worst in case of the 54 Mbps transmission system using the maximum length of data. In this paper, the new algorithm is proposed which can resolve the embodiment complexity of synchronization processes and structural defect, and also it is confirmed by simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.574-577
• /
• 2002

In this paper, we propose a new symbol time synchronization scheme suitable for the OFDM system with an interpolator. The proposed performs the following three steps. In the first step, the coarse symbol time synchronization is achieved by continuously measuring the average power of the received envelope signal. Based on this average power, the detection possibility for the symbol time synchronization is determined. If the signal is sufficient for synchronization, we next perform a relatively accurate symbol time synchronization by measuring the correlation a short training signal and the received envelope signal. Finally, an additional frequency synchronization is performed with a long training signal to correct symbol synchronization errors caused by the phase rotation. From the simulation results, one can see that the proposed synchronization scheme provides a good synchronization performance over frequency selective channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.66-78
• /
• 2002

In this paper, we propose a new symbol offset estimation technique for an orthogonal frequency-division multiplexing (OFDM)-based wireless LAN. When both inter-symbol interference (ISI) and inter-channel interference (ICI) do not exist in an OFDM symbol, symbol offsets cause circular shifts in the estimated channel impulse response (CIR) by the amount of symbol offset. Also, the power delay profile of a typical multipath wireless channel can be modeled by exponentially decaying function, and most energy of multipath channel is concentrated at the beginning part of the CIR. Based on these properties, the proposed symbol offset estimation technique estimates the CIR, which is circularly shifted by the amount of symbol offset, and then calculates the partial mean power from the estimated impulse response by using a moving window with a finite length. And, symbol offset can be estimated from the index of a moving window having the maximal partial mean power. The proposed technique can reduce noise effect in the process of the CIR estimation, and remove ISI and ICI using repetitive training symbol structure in time-domain for minimum training overhead. The performances of the proposed symbol offset estimation technique in typical indoor channels are demonstrated by computer simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.8-12
• /
• 2007

In this paper, we proposed an frequency offset estimation scheme which can be used for packet based OFDM communication systems such as IEEE802.11a and IEEE802.11p physical layer. Proposed estimation scheme can adjust the gain allocation ratio between long training symbol and short training symbol while maintaining average power of overall training sequence so that we can obtain the reference parameters for MSE performance improvement. The preamble structure considered in this paper is based on the preamble specified in IEEE802.11a and IEEE802.11p standardization group. From the simulation results, it is shown that power ratio between long training symbol and short training symbol must vanes for achieving lower frequency offset estimation error as channel SNR condition is changed. Also it is known oat proposed scheme can achieve better performance than conventional one.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.3-13
• /
• 2013

This paper contains two algorithms proposed for synchronization in OFDM system. The first is having 1 symbol offset while calculating the timing metric, and the second is introduced in new parameter such as Reduction Factor(${\rho}$), Break Constant(${\beta}_k$) and Implant Depth(${\delta}_I$) in order to control the power of CP(Cyclic Prefix) area. Two proposed method are evaluated performance with conventional methode, and than the result of simulation show proposed methods is better than conventional methode while it experience into multipath fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.479-486
• /
• 2008

In this paper, an efficient training symbol design with m-sequence is proposed for the MIMO-OFDM based next generation wireless transmission system which supports gigabits per second data rate. In the traditional blute force method, the preamble design is based on the case by case comparison with the system requirements. This paper discusses a training symbol design methodology for the MIMO-OFDM system based on the m-sequence which has been widely used in the spread spectrum communication areas due to its good correlation characteristics. Also the step-by-step design and performance verification method within the limited search space is discussed. The proposed method targets the design of the training symbol which satisfies system requirements for the packet based MIMO-OFDM wireless communication system including automatic gain control(AGC), timing synchronization, frequency and sampling offset estimation, and MIMO channel estimation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.79-89
• /
• 2002

A synchronization method is presented for IEEE 802.11a wireless OFDM system. First the coarse symbol synchronization is achieved by measuring the moving power average of the received envelope signal. The detection probabilities and optimum thresholds for the symbol synchronization are derived. By measuring the correlation between the short training signal and received envelope signal, fine symbol synchronization can be acquired. And the frequency synchronization is achieved using long training signal. A symbol synchronization error causes a phase rotation of the constellation. After the compensation for fading channel, the rotation due to the symbol timing error can be corrected. With this method, synchronization can be well achieved over frequency selective channels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.9-15
• /
• 2004

In MIMO-OFDM systems, conventional channel estimation techniques using comb type training symbols give relatively large mean squared errors(MSEs) at the edge subcarriers. To reduce the MSEs at these subcarriers, a cyclic comb type training structure is proposed. In the proposed cyclic training structure, all types of training symbols are transmitted cyclically at each antenna. At the receiver, the channel frequency responses that are estimated using each training symbol are averaged with weights obtained from the corresponding MSEs. Computer simulations showed that the proposed cyclic training structure gives more SNR gain than the conventional training structure.