• Journal of the Korean Society for Railway
• /
• v.8 no.2
• /
• pp.155-160
• /
• 2005

We propose a tram position estimation method for automatic train control system. The accurate train position should be continuously feedback to control system for safe and efficient operation of trains in railway. In this paper, we propose the sensor fusion method integrating a tachometer, a transponder, and a doppler sensor far estimation of train position. The external sensors(transponder, doppler sensor) are used to compensate for the error of internal sensor (tachometer). The Kalman filter is also applied to reduce the measurement error of the sensors. Simulation results are then presented to verify the usefulness of the proposed method.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1205-1211
• /
• 2004

We propose a train position estimation method for automatic train control system. The accurate train position should be continuously feedback to control system for safe and efficient operation of trains in railway. In this paper, we propose the sensor fusion method integrating the tachometer, the transponder, and the doppler sensor for estimation of train position. The external sensors(transponder, doppler sensor) are used to compensate for the error of internal sensor(tachometer). The Kalman filter is also applied to reduce the measurement error of the sensors. Simulation results are then presented to verify the usefulness of the proposed method.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.226-231
• /
• 2011

This research was done to prove the optimal position to detect a train reader when using a multiple fusion sensor. The experiment was done using four Train installed RFID Readers located on the train. These readers were read by sensors installed at intervals of 50 meters on the up and down sections of the Line 8, from Amsa station to Moran station. We analyze errors in the recognition range according to the Tag's number of recognition due to RFID of train speed, and propose a method of estimation for an accurate estimation of the position of train At this the Least-Squares Method is applied to judge the position of train accurately from the error because of Tag's number of recognition and RFID of train speed. also It is verified through simulation.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.238-240
• /
• 2006

For the method of train position detection, ground-based train position estimation mainly has been applied so far. Ground-based position detection is the way to detect train current positions by installing train position equipments on railroad lines. However, the ground-based methods should install detection equipments on each section, and can only be able to detect train positions from main command center. So this method has several disadvantages such as an discontinuous position detection, an increment in cost of installation and maintenance. To make possible continuous train position detection, and to minimize amount of the cost, the vehicle-based position detection method should be chosen to determine train positions by loading position equipments on vehicles. In this paper, to realize the vehicle-based train position detection method, configuration scheme of train position detection equipment is suggested by using GPS, inertial sensor, speed sensor and its performance is verified by simulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4739-4746
• /
• 2013

In position detection for super speed maglev propulsion control, the influence of position signal delay and transmit cycle on propulsion power degradation is investigated analytically and validated by test bed experiments. As a solution to the problem caused by signal transmit, position signal compensation and estimation method is proposed and applied to the test bed. Through experiments, it is confirmed that by adapting the proposed method, the propulsion power is increased remarkably, which results in acceleration and velocity performance improvement. This method could be effectively applied to position detection system of Korean super speed maglev which is under development.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.272-273
• /
• 2015

This paper analyze scenario of feeder wire fault that occurs in the AC feeding system considering train position. The fault location of AC feeding system is calculated by measuring impedance. However, in this way, estimation error can be occurred because of tie connection, boosting current, etc. Therefore, it's hard to find fault location, so that it is required to detailed circuit analysis according to fault location. We analyze the short circuit impedance values with respect to feeder wire fault according to a train position. In this paper, PSCAD is used for modeling and analysis of AC railway feeding system.

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.365-369
• /
• 2012

We propose a vision-based method that estimates train position and movement for railway monitoring in which we use a fuzzy classifier to determine train states. The proposed method employs frame difference and background subtraction for estimating train motion and presence, respectively. These features are used as the linguistic variables of the fuzzy classifier. Experimental results show that the proposed method can correctly estimate train position and movement. Therefore the method can be used for railway monitoring systems which estimate crowd density or protect safety.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.141-151
• /
• 1993

For navigation of a mobile robot, it is one of the essential tasks to find out its current position. Dead reckonining is the most frequently used method to estimate its position. Hpwever conventional dead reckoner is prone to give us false information on the robot position especially when the wheels are slipping. This paper proposes an improved dead reckoning scheme using neural networks. The network detects the instance of wheel slopping and estimates the linear velocity of the wheel; thus it calculates current position and heading angle of a mobile robot. The structure and variables of the nerual network are chosen in consideration of slip motion characteristics. A series of experiments are performed to train the networks and to investigate the performance of the improved dead reckoning system.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.802-810
• /
• 2006

For a thorough train control, the precise train position detection is necessarily required. The widely used current way for train position detection is the one of using track circuits. The track circuit has a simple structure, and has a high level of reliability. However trains can be detected only on track circuits, which have to be installed on all ground sections, and much amount of cost for its installation and maintenance is needed. In addition, for the track circuit, only discontinuous position detection is possible because of the features of the closed circuit loop configuration. As the recent advances in telecommunication technologies and high-tech vehicle-based control equipments, for the train position detection, the method to detect positions directly from on trains is being studied. Vehicle-based position detection method is to estimate train positions, speed, timing data continuously, and to use them as the control information. In this paper, the features of GPS navigation and DR navigation are analyzed, and the navigation filters are designed by constructing vehicle-based train position detection method by combining GPS navigation and DR navigation for their complementary cooperation, and by using kalman filter. The position estimation performance of the proposed method is also confirmed by simulations.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.1
• /
• pp.38-42
• /
• 2017

The wear of the third track power collector is one of the essential check factors for safe train operation. Rapid wear of the current collector accelerates the line of the catenary. In addition, the arc generated when the catenary line is turned off causes a malfunction in the minute portion of the catenary line, thereby shortening the life of the catenary line. In this paper, to analyze the mechanical wear of the current collector during driving according to the environmental factor of the Maglev(magnetic levitation train), it was divided into dry season and wet season. the wear of metallized collector, copper alloy collector and carbon collector were measured and compared with each other. The wear rate was measured according to the position of the wire, the position of the power collector and the position per hour. Microscopic photographs of the cross section and surface of the power collector were measured. The electrical currents of the metallized collector, copper alloy collector and carbon collector were measured.