• 디지털산업정보학회논문지
• /
• 제11권1호
• /
• pp.9-18
• /
• 2015

Numerical analysis of PSC box bridge bearings for high speed KTX train vehicles has been carried out as a virtual simulation for Ubiquitous Technology. Improved numerical models of bridge, vehicle and interaction between bridge and train are considered, where bending and torsional modes are provided, whereas the exist UIC code is applied by the simplified HL loading. Dynamic and static analysed results are compared to get Dynamic Amplification Factors (D. A. F.) for maximum deflections and bending stresses up to running speed of 500 km/h. Equation from the regression analysis for the D. A. F. is presented. Sliding distance of the bearings for various KTX running speeds is compared with maximum and accumulated distances by the dynamic behaviors of PSC box bridge. Dynamic and static simulated sliding distances of the bearings according to the KTX running speed are proved as a major parameter in spite of the specifications of AASHTO and EN1337-2 focused on the distance by temperature variations.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.163-171
• /
• 1998

Continuously contacting with camshaft the face of Valve Lifter made of cast iron brings about abnormal wear such as unfairwear or earlywear because it is heavily loaded in the valve train systems as the engine gets more powered. This abnormal wear becomes a defet namely over-clearance when the valve is lifting so that the fuel gas imperfectly combusted by unsuitable open or close aaction of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major cause of air pollution and combustion chamber. The imperfectly combusted by unsuitable open or close action of the engine valve in the combustion chamber. The imperfect combustion in the end results in the major causes of air pollution and decrease of the engine output. Consequently to prevent this wear this study was to develop the valve lifter which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened which is joined by brazing process with SCM435H and a tip by manufacturing the face as a superhardened ceramics alloy which has high wear resistance. Having the excellent surface hardness with Hv1100-1200 the sintered body developed with superhardened alloy(WC) can endure the severe face loading in the valve train system. We experienced with various brazing alloys and obtained the excellent joining strength to the joint had 150MPa shear strength. Interface analysis and microstructure in a joint were examined through SEM & EDS Optical microscope. Also 2,500 hours high speed(3,000-4,000 rpm) and continuous (1step 12hr) engine dynamo testing was carried out to casting valve liter and ceramics-metal joint valve lifter so that the abnormal wears were compared and evaluated.

• Smart Structures and Systems
• /
• 제12권3_4호
• /
• pp.251-269
• /
• 2013

Measurement of deflections of certain bridges is usually hampered by corruption of the GPS signal by multipath associated with passing vehicles, resulting to unrealistically large apparent displacements. Field data from the Gorgopotamos train bridge in Greece and systematic experiments revealed that such bias is due to superimposition of two major effects, (i) changes in the geometry of satellites because of partial masking of certain satellites by the passing vehicles (this effect can be faced with solutions excluding satellites that get temporarily blocked by passing vehicles) and (ii) dynamic multipath caused from reflection of satellite signals on the passing trains, a high frequency multipath effect, different from the static multipath. Dynamic multipath seems to have rather irregular amplitude, depending on the geometry of measured satellites, but a typical pattern, mainly consisting of a baseline offset, wide base peaks correlating with the sequence of main reflective surfaces of the vehicles passing next to the antenna. In cases of limited corruption of GPS signal by dynamic multipath, corresponding to scale distortion of the short-period component of the GPS waveforms, we propose an algorithm which permits to reconstruct the waveform of bridge deflections using a weak fusion of GPS and RTS data, based on the complementary characteristics of the two instruments. By application of the proposed algorithm we managed to extract semi-static and dynamic displacements and oscillation frequencies of a historical railway bridge under train loading by using noisy GPS and RTS recordings. The combination of GPS and RTS is possible because these two sensors can be fully collocated and have complementary characteristics, with RTS and GPS focusing on the long- and short-period characteristics of the displacement, respectively.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.756-763
• /
• 2007

The majority of catastrophic wheel failures are caused by surface opening fatigue cracks either in the wheel tread or wheel flange areas. The inclined cracks at railway wheel tread are initiated and the cracks are caused by wheel damage-spatting after 60,000 km running. Because the failured railway wheel is reprofiled before regular wheel reprofiling, the maintenance cost for the railway wheel is increased. Therefore, it is necessary to analyze the mechanism for initiation of crack. In the present paper, the combined effect on railway wheels of a periodically varying contact pressure and an intermittent thermal braking loading is investigated. To analyze damage cause for railway wheels, the measurements for replication of wheel surface and the effect of braking application in field test are carried out. The result shows that the damages in railway wheel tread are due to combination of thermal loading and ratcheting.

• 한국측량학회지
• /
• 제27권6호
• /
• pp.711-721
• /
• 2009

본 연구에서는 철도 판형교의 변형량을 측정하기 위해, 수치근접 사진측량 기법을 제안하였다. 제안방법에 의한 변형측량의 비교를 위해 기존 재하시험 방법을 동시에 수행하였다. 그 결과, 제안방법과 재하시험에 의한 측정값 차이는 1~2mm 정도였으며, 열차의 반복하중으로 인한 I형거더의 처짐과 비틀림 현상을 동시에 파악할 수 있었다. 따라서 수치사진측량으로 I형거더의 변형측정 가능성을 확인할 수 있었으며. 이 방법은 정밀안전진단과 인력점검의 대안적 방법이 될 수 있을 것이다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 2005

특수선은 일반화물과 달리 적$\cdot$양하를 위한 준비가 순차적으로 이루어져야 하며 LNG 및 LPG 운반선은 화물이 극저온 혹은 고압이라는 특성 때문에 고도의 안전성이 요구된다. 또한 인명 안전 및 해상환경 보호를 위해 액화물 취급의 중요성을 인식하면서도 과학적인 장비를 이용한 교육 ·훈련의 관심 부족 및 제도적 지원책이 미비하여 현재까지 해양교육기관에 설치된 장비는 거의 없는 상태이며 그나마 보유하고 있는 장비도 노후되어 원활한 교육$\cdot$훈련이 어려운 실정이다. 따라서, 본 논문에서는 본 연구는 특수선 특히 LNG선박의 적양하 작업을 시뮬레이션 할 수 있는 교육시스템을 개발하는 것이다.

• Structural Engineering and Mechanics
• /
• 제70권6호
• /
• pp.723-735
• /
• 2019

Track-bridge interaction (TBI) problem often arises from the adoption of modern continuously welded rails. Rail expansion devices (REDs) are generally required to release the intensive interaction between long-span bridges and tracks. In their necessity evaluations, the key techniques are the numerical models and methods for obtaining TBI responses. This paper thus aims to propose a preferable model and the associated procedure for TBI analysis to facilitate the designs of long-span bridges as well as the track structures. A novel friction-spring model was first developed to represent the longitudinal resistance features of fasteners with or without vertical wheel loadings, based on resistance experiments for three types of rail fasteners. This model was then utilized in the loading-history-based TBI analysis for an urban rail transit dwarf tower cable-stayed bridge installed with a RED at the middle. The finite element model of the long-span bridge for TBI analysis was established and updated by the bridge's measured natural frequencies. The additional rail stresses calculated from the TBI model under train loadings were compared with the measured ones. Overall agreements were observed between the measured and the computed results, showing that the proposed TBI model and analysis procedure can be used in further study.

• 한국전산구조공학회논문집
• /
• 제33권2호
• /
• pp.121-128
• /
• 2020

본 논문에서는 고속열차-차륜-레일-지반부의 상호작용에 따른 지반부의 변위장과 가속도장의 분포양상을 연구하고자 하였다. 이를 위해 고속열차 주행을 실제 차륜으로 모형하여 차륜-레일간의 연직접촉과 사행동에 의한 횡접촉을 모사하고, 이동질량해석을 근간으로 하였다. 이 때 지반부는 Modified Drucker-Prager 모델을 이용하여 상면 지반부의 비선형 거동을 부여하고 이에 따른 변위, 가속도의 변화를 탄성지반의 거동과 비탄성지반의 거동을 상호 비교하였다. 이를 통해, 실제 지반거동과 가까운 변위와 가속도 범위를 예측하고자 하였다. 이 때 지반부의 von-Mises응력과 등가소성변형도를 검토하고, 각 파괴면에서의 등가소성변형도, 전체 체적변형도 등을 검토하였다. 이동질량을 이용한 차륜-레일 접촉부의 수직응력, 횡압, 종방향 구속압 등의 시간이력에 따른 응력변화도 검토하였다. 비선형 지반모델의 경우 탄성 지반모델에 비해 열차 주행에 따른 변위 차이는 크지 않는 반면에 가속도의 경우는 큰 감소를 발생시키는 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.269-276
• /
• 2011

This paper considers the rail crane scheduling problem with minimizing the sum of the range of order completion time and make-span of rail crane simultaneously. The range of order completion time implies the difference between the maximum of completion time and minimum of start time. Make-span refers to the time when all the tasks are completed. At a rail terminal, logistics companies wish to concentrate on their task of loading and unloading container on/from rail freight train at a time in order to increase the efficiency of their equipment such as reach stacker. In other words, they want to reduce the range of their order completion time. As a part of efforts to meet the needs, the crane schedule is rearranged based on worker's experience. We formulate the problem as a mixed integer program. To validate the effectiveness of the model, computational experiments were conducted using a set of data randomly generated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1230-1235
• /
• 2011

The track stiffness is determined by the pad stiffness. Low elastic pad is the most effective track component on the basis of stress-displacement characteristics, dynamic response and fatigue characteristics. It is more important in case of concrete track. The main objective of this paper is to confirm the reduction effect of train load, which transfer to roadbed through track. To achieve this object, numerical analysis and real scale repeated loading test was performed. The load reduction effect of low elastic pad was analyzed by using displacement, stress and strain ratio of the paved track at each point.