• 대한인간공학회지
• /
• 제30권1호
• /
• pp.237-250
• /
• 2011

The train transportation has a lot of advantages-energy efficiency is high, it is eco-friendly, safety is better than normal roads and it is possible for people to arrive on time. In these days, the valuation of ride comfort, which is only limited to road transportation, is newly recognized in order to having competitiveness from other transportation. Especially, in the development of the Korean high-speed railroad business, the ride comfort enhancement of train is very important problem to be solved. Currently, there are international standards of ride comfort such as UIC13, ISO2631. In Korea case, although it has own standard like KS R9216, it mainly depends on the physical parameter such as vibration and noise. So recently, in the valuation of ride comfort, the movements of living parameter technique introduction are increasing on the base of Japan and many developed countries of Europe techniques. Presently, the method of train ride comfort is mainly based of vibration, that is, mechanical parameter adding selection of variable acceleration and noise. This paper would like to show biological parameter; heart rate and blood pressure variation. This method is more direct, based on human body response, than mechanical parameter method. In this experiment, the variability of heart rate and blood pressure of passengers according to tilting angle change of Train, the Korean tilting train, we are supposed to know that the extent of tilting on the simulation has influence on variability of heart rate and blood pressure, which are living parameter of heart's blood.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.383-386
• /
• 2006

The safety of the railway system is important because the system is a mass transit system and the results of the accident are inconceivable. The railway system is operated by train operation system such as train control system. So the train control system requires safety critical characteristics. In the European railway, ETCS (European Train Control System) project has been finished to accomplish the interoperability of each national railway signaling system. According to the interoperability degree, ETCS levels are suggested. As the highest level, ETCS level 3 suggests a radio communication. Also recently urban railway system is operated by driverless and automatic train control system. In this circumstance, more safety is required than before in the railway system. In order to accomplish the safety of a system, the requirements considering safety have to be suggested. The requirement is a set of several functions such as general function, environment, safety etc. For the safety critical system, safety function is more important than any other functions. The safety functions are deduced by safety analysis. In order to perform the safety analysis, the system hazards have to be identified and then risk analysis for each hazard should be performed. The risk is related to the frequency and the severity of each hazard. And then countermeasures for each risk have to be prepared. The summary of the countermeasures is about a kind of safety functions in a system. In this paper, the safety functions for a train control system are presented according to the above procedure.

• 한국ITS학회 논문지
• /
• 제20권5호
• /
• pp.1-17
• /
• 2021

대부분의 도시철도 시스템은 승객의 탑승열차 및 탑승열차종을 정확히 알 수 없다. 다수의 선행연구에서는 교통카드데이터와 열차시각표를 매칭하여 탑승열차를 추정하였으나, 추정이 불가능한 승객 또한 다수 존재한다. 본 연구의 9호선 사례분석 결과 교통카드데이터-열차시각표 매칭만으로는 약 28% 승객의 탑승열차종을 추정할 수 없음을 확인할 수 있었다. 이에 교통카드데이터-열차시각표 매칭과 본 연구에서 정의한 통행시간 기반 혼합확률분포분석을 순차적으로 적용하여 급행운영 도시철도노선 승객의 탑승열차종을 추정하는 방법을 개발하였다. 분석 결과, 298개 OD pair에서 본 연구의 검증 기준을 만족하는 합리적인 급행이용/비이용 승객 분류기준점을 도출할 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.11-22
• /
• 2018

철도터널의 방재시설 계획 시 터널의 안전성을 정량적 위험도 평가에 의해서 정량화하여 방재시설의 적정성 여부를 판단하도록 하고 있다. 이에 본 연구에서는 터널화재에 대한 정량적 위험도 평가 시 결과에 크게 영향을 미치는 화재열차의 터널 내 정차확률을 예측하는 방법을 제시하였다. 이를 위해서 열차의 주행저항계수를 고려하여 타력운전거리를 계산하기 위한 모델을 개발하였으며, 타력운전특성과 비상제동거리를 고려하여 몬테카를로 시뮬레이션 기법에 의해 터널연장 및 경사도, 초기주행속도를 변수로 하여 화재열차가 터널에 정차할 확률을 예측하였다. 타력운전거리의 예측을 위한 운동방정식은 KTX II의 주행저항계수를 반영하여 분석하였다. KTX II 열차의 경우, 타력운전거리는 상향경사의 터널에서는 경사도가 증가할수록 감소하나 하향경사구간에서는 정지하지 않고 계속하여 주행이 가능하다. 화재열차의 터널 내 정차확률은 열차의 주행속도가 증가할수록, 경사도가 낮을수록 감소하며, 고속열차(주행속도 250 km/h 이상)는 인적오류를 고려하지 않는 경우, 경사도 0.5% 이하의 터널에서는 화재 시 열차가 터널에 정차할 확률은 0%이고, 경사도가 증가하고 터널연장이 증가하면 정차확률은 급격하게 증가하는 것으로 나타났다.

• 한국강구조학회 논문집
• /
• 제20권1호
• /
• pp.151-163
• /
• 2008

본 논문에는 KTX (Korean eXpres Train)을 위한 3차원 관절대차의 차량-교량 동적 상호작용의 해석모델의 공식이 제안되었다. 궤도틀림의 반주기적 파형이 FRA의 레일틀림 최대허용기준을 사용하여 제안되었고, 레일 이음매와 침목의 간격 또한 포함되었다. 궤도틀림은 수준, 구배, 수평 및 궤간틀림을 포함하고 있다. 결과적으로 나타나는 차량-교량 시스템 행렬은 매우 적은 요소를 포함하기 때문에 1차원의 배열에 저장할 수 있으며, 시간절약적인 해법을 창출한다. 반복기법을 포함하는 차량-교량 작용 계산의 수치적 알고리즘 또한 공식화하였으며, 차량-교량 상호작용을 모사하고 새로운 알고리즘에 의해서 이 문제를 풀기 위한 프로그램이 'XFINAS'라고 불리는 프로그램에 모듈로서 내포되었다. 새로운 프로그램에 의해서 계산된 결과가 검증된 2차원의 차량-교량 상호작용 모델의 결과에 의해서 검증되었다. 본 연구에서 제시한 3차원 해석은 차량의 보다 상세한 응답을 제공한다. 예를 들면, 회전운동-롤링, 요잉 및 피칭- 및 수평 및 수직운동에 대한 가속도를 제공할 수 있으며, 이러한 응답은 승객의 승차감 평가에 유용한 자료로 활용될 수 있다. 차량의 안정성과 차륜의 탈선 또한 본 프로그램에서 계산되는 차륜의 상대변위를 이용하여 직접적으로 계산이 가능하다.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.482-493
• /
• 2006

The carbody structure of a high speed train passing through a tunnel is subjected to pressure fluctuation. Fatigue strength of the carbody structure against the fluctuating pressure loading should be proved in the design stage for safety. In this study, to get the useful information on the pressure fluctuation in the tunnel, measurement has been conducted during test running of KHST on the high speed line for two years. The measured results were analyzed and arranged to be used for carbody design. A prediction method for the magnitude and frequency of pressure change was proposed and the propagating characteristics of pressure wave was investigated. By statistical analysis for the measured results, a pressure loading spectrum for the high speed train was given. The proposed method can also be used to estimate the pressure loading spectrum for new high speed line at design stage combined with the results of train performance simulation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.14-19
• /
• 2011

Wind tunnel tests are performed so as to investigate the aerodynamic drag characteristics of HEMU-400x, next generation Korean high speed train. The experiments of 1/20 scaled 5-car train model are done at 30, 40, 50, 60m/s with a normal bogie, a bogie cover, and a streamlined shape. The flat plate with knife edge are installed to minimize the effect of boundary layer of wind tunnel for the train model. The aerodynamic drag reduction was more by a streamlined shape than by a bogie cover from a normal bogie. Based on the experimental results, the aerodynamic drag of HEMU-400x test train(6-car) was predicted. It is prediceted that More bogie cover could reduce more aerodynamic drag of the test train in replacement of normal bogies.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.343-349
• /
• 2011

Now, for the continuous location detection of train, the method that the moving distance of a vehicle is detected using an wheel sensor(odometer) mounted within a train, is generally used. It has a problem that the positioning errors of a train can be accumulated as the moving distance increases. To solve this problem, it is required to apply a variety of positioning sensors and to integrate with sensor data. In this paper, we develop the train-borne positioning system applicable to the conventional railway and high-speed railway, and verify the performance of the train-borne positioning system through a vehicle test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.671-679
• /
• 2011

Now, for the continuous location detection of train, The method which the moving distance and speed of vehicles are detected using an odometer mounted within railway vehicle, is used in railway domain generally. There are some problems that the train's positioning errors are accumulated as the moving distances increase. To solve this problems, The Train-borne Positioning System is being developed at Korea Railroad Research Institute. It is required to evaluate exactly a positioning performance of The Train-borne Positioning System for improvement of performance. Therefore, in this paper, we review the CDGPS methods to acquire reference position for performance evaluation of Train-borne Positioning System and verify the accuracy of the reference position through the static test and the vehicle test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1118-1123
• /
• 2011

The introduction of high speed railway(KTX) in Korea after the Korean high speed train through the KTX-II of the development is being run is made. Thus the demand for the railway technology advances and high performance, Korean government promoted the development of the next-generation high speed train system(HEMU-400X). In addition to the production of train system essential element of the train through an on-line test is to evaluate the performance. Through the on-line test of the train in order to evaluate the performance test items should be selected first and need to the test procedures are required. In addition, an Overall Measuring System(OMS) to measure the performance of the train system should be established. In this study for the on-line test of the HEMU-400X test items was selected for detailed measurements and performance evaluation of a comprehensive and efficient trains to test an OMS for the development are discussed.