• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.149-155
• /
• 2003

우리나라의 농가에서 운반용으로 사용되고 있는 동력경운기와 트랙터 등의 트레일러는 현가장치와 방진장치가 없는 것이 대부분이다. 이런 트레일러를 비포장 된 과수원 등의 농장에서 과채류를 포장되지 않은 상태로 적재물이 트레일러의 바닥에 깔린 채 소량을 적재한 상태로 저속으로 운송될 때 충격, 진동, 마찰 등으로 많은 수송 손실이 예상된다. 이런 수송손실을 줄이기 위해서는 트레일러에 전달되는 진동을 줄여야 한다. (중략)

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4030-4048
• /
• 2022

In this study, road transportation tests were conducted with surrogate fuel assemblies under normal conditions of transport to evaluate the vibration and shock load characteristics of spent nuclear fuel (SNF). The overall test data analysis was conducted based on the measured acceleration and strain data obtained from the speed bump, lane-change, deceleration, obstacle avoidance, and circular tests. Furthermore, representative shock response spectrums and power spectral densities of each test mode were acquired. Amplification or attenuation characteristics were investigated according to the load transfer path. The load attenuated significantly as it transferred from the trailer to the cask. By contrast, the load amplified as it transferred from the cask to the surrogate SNF assembly. The fuel loading location on the cask disk assembly did not exhibit a significant influence on the strain measured from the fuel rods. The principal strain was in the vertical direction, and relatively large strain values were obtained in spans with large spacing between spacer grids. The influence of the lateral location of fuel rods was also investigated. The fuel rods located at the side exhibited relatively large strain values than those located at the center. Based on the strain data obtained from the test results, a hypothetical road transportation scenario was established. A fatigue evaluation of the SNF rod was performed based on this scenario. The evaluation results indicate that no fatigue damage occurred on the fuel rods.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.515-521
• /
• 2015

The purpose of this study was to analyze the weights of obstacle factors against mutual access of towed trailers of car-ferry between South Korea and China using Fuzzy-AHP. To this end, factors were first selected through literature research and finally selected through in-depth interviews with a group of experts in cargoes who are currently in car-ferry companies. Selected high rank obstacle factors included unstable service provision, limited policy support, and additional costs being incurred and among them, unstable service provision was identified as the most serious obstacle factor through analysis. Eleven measurement variables selected include insufficient supply of container yard, trailer insurance and management issues, insufficient special equipment, insufficient specialized manpower, limited input service courses, insufficient marketing and public relations strategies, and increasing transportation costs and among them, increasing equipment returning costs due to unbalanced cargo gathering were identified as the most serious obstacle factor through analysis followed by limited input service courses, insufficient special equipment, delays in procedures, and occurrence of additional procedures in order of precedence.

• Structural Engineering and Mechanics
• /
• v.91 no.1
• /
• pp.25-38
• /
• 2024

After the mainshock, whether the train can be allowed to pass the bridges plays an important role in ensuring the transport of supplies and rescue works for example, in the "12 May" earthquake in China, after evaluation, the bridge was still used for transportation in rescue at a very slow speed, engineers usually evaluate whether the train can pass the bridge safely based on the experience, lacks sufficient calculation basis and does not fully consider the risk caused by aftershocks. To address this issue, this paper comprehensively considers the randomness of track irregularity, the randomness of aftershock intensity and other multiple random sources in train-bridge interaction system (TBIS). The sensitivity of train to various random parameters after earthquake is analyzed from the perspective of probability, the most sensitive random variable in this paper is PGA of aftershocks, both for bridge and trailer car, With the increase of epicentral distance, the sensitivity of PGA will decrease, and correspondingly, for trailer car, the sensitivity of other random variables will increase, research in this paper provides a basis for the subsequent random analysis of post-earthquake driving safety.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.62-73
• /
• 2001

The scope of this study is focused on the survey of new logistics transportation systems in railroad and case studies of new systems such as piggyback system, bi-modal system swapbody, and double stack train(DST). Piggyback system, bi-modal system, swapbody, and double stack train are reviewed in term of technological validity and economic validity in Korea. Piggyback - trailer does pass loaded weight limits but does not pass train limits and can not utilize the existing freight cars. Piggyback - cargo trunk does pass all the criteria and could be developed by a domestic technology. But this study suggests to expand the length of train cars to 18.300mm for accommodation of two cargo trucks. Bi-modal system and swapbody do also pass. Double stack train could only pass the loaded weights and does not meet the train limit and the possibility of using existing freight cars. Domestic technology could not development DST, due to civil engineering construction limits and low standard height of electric line, which could not afford to operate DST.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.4
• /
• pp.373-380
• /
• 2010

An interest is increased of environment and energy so, importance on railroad high energy efficiency is magnified. And after Gyeong-bu High speed rail is completed, share rate freight transportation of railroad is expected to be gradually increased due to expand investment for railroad and operate mainly freight transportation on convention line. Therefore a research on DMT freight cars is necessary under like this situation. In paper, we developed analysis model for DMT freight car and DMT freight was analyzed numerically using VI-Rail in each condition of railway having different curve and carried out vibration analysis on curving using developed analysis model. And we carried out test on driving stability follow changing curve radius then measure against UIC code 518.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.638-645
• /
• 2014

This paper presents results of a study for development and application of container massive transportation system. The system is aimed to improve competing power of Korean container ports. This paper selects Double stack Multi-Trailer System (DMTS) under consideration of pros-con analysis between three systems alternatives as well as operation process of existing Korean container terminal companies. An analysis of turning radius is undertaken for applying the system. Key elementary technologies was derived by patent analysis. DMTS has no problems in utilization to existing Korean container ports. Further, the system is expected to highly potential to improve operational efficiency in the container ports thanks to its high unit transportation capacity.

• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.607-615
• /
• 2022

In this study, economic analysis program was developed for economic evaluation of hydrogen production, storage/delivery, and utilization technologies as well as overseas import of hydrogen. Economic analysis program can be used for the estimation of the levelized cost of hydrogen for hydrogen supply chain technologies. This program include five hydrogen production technology on steam methane reforming and water electrolysis, two hydrogen storage technologies (high compressed gas and liquid hydrogen storage), three hydrogen delivery technologies (compressed gas delivery using tube trailer, liquid hydrogen, and pipeline transportation) and six hydrogen utilization technologies on hydrogen refueling station and stationary fuel cell system. In the case of overseas import hydrogen, it was considered to be imported from five countries (Austraila, Chile, India, Morocco, and UAE), and the transportation methods was based on liquid hydrogen, ammonia, and liquid organic hydrogen carrier. Economic analysis program that was developed in this study can be expected to utilize for planning a detailed implementation methods and hydrogen supply strategies for the hydrogen economy road map of government.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.139-147
• /
• 2007

In military transportation, the use of wide trailer for transporting the large and heavy weight equipments such as tank, armoured vehicle, and mobile gunnery is quite common. So, the vulnerability of causing traffic accidents for these wide military trailer to bump or collide with another car in adjacent lane is very high due to its broad width in excess of its own lane's width. Also, the possibility of these strayed accidents can be increased especially by the careless driver. In this paper, the recognition system of lane and vehicle headway direction is developed to detect the possible collision and warn the driver to prevent the fatal accident. In the system development, Kalman filtering is used first to extract the border of driving lane from the video images supplied by the CCD camera attached to the vehicle and the driving lane detection is completed with regression analysis. Next, the vehicle headway direction is recognized by using neural network scheme with the extracted parameters of the detected driving lane feature. The practical experiments for the developed system are also carried out in the real traffic road of Seoul city area and the results show us the more than 90% accuracy in recognizing the driving lane and vehicle headway direction.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.140-148
• /
• 2003

수송 중에 일어나는 과채류의 손실에 대한 주요 자료들을 정리하여 보면 주요 쟁점은 수송 중에 발생된 가속도와 주파수의 크기, 적재방법과 적재 위치, 3차원진동과 수송속도에 따라 농산물이 어떤 손상을 입으며 저장성과 상품성에 어떻게 영향을 미치는가 하는 문제로 요약된다. 그러나 우리나라의 농가에서 운반용으로 주로 사용되고 있는 동력경운기 트레일러는 현가장치와 진동흡수장치가 없는 것으로 농산물의 운송시에 발생되는 충격ㆍ진동 등으로 인해 많은 수송 손실이 예상된다. 결론적으로 트레일러에 전달되는 진동을 줄이기 위해서는 트레일러에 스프링 시스템을 장착하고, 엔진과 연결되는 히치 부분에 진동흡수 시스템을 장착하여 트레일러에 전달되는 진동을 최소화시키는 방법을 강구하여야 한다. (중략)