• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.567-578
• /
• 2014

The study suggested a method to improve analysis accuracy such that the interactive effects of transportation changes between outside and inside of sub-areas were sequentially considered in the analysis by linking a macroscopic network analysis and a microscopic traffic simulation. A dynamic O/D estimation method was developed for practical implement of sub-area microscopic simulation analysis by using the results of macroscopic network analysis, the results of selected link analysis at the cordon line of the sub-area, departure time data of household travel survey, timely observed traffic volume data at the cordon. This estimated dynamic O/D for the sub-area made it possible to analyze traffic phenomena in details. Various detailed phenomena such as traffic queues, delay at intersection, and conflicts between vehicles, which is impossible to be grasped through a macroscopic analysis, can be analyzed with the dynamic microscopic traffic analysis. Through implementing an empirical study and validation, the study provided a reference result about accuracy of a microscopic traffic simulation of a sub-area to help its application for real transportation policy analysis.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.2
• /
• pp.80-93
• /
• 2018

Public transit services are generally analyzed based on the correlation of demand and supply. The computation of supply uses accessibility while demand uses travel demands estimation based on residential population. However, the traditional demand estimation has a limitation in analysing in micro-scale compared to the smartcard data traffic. This study analyzed potential improvement of public transit services using smartcard traffic data. The supply of transportation was defined using time distance accessibility. Also, time loss was calculated in those origin destination(OD) pairs where time distance accessibilities are relatively low. The proposed method was applied at Seoul. The results showed that the areas where OD pairs need improvement include Seodaemun-gu, Guro-gu and Nowon-gu.

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.34-40
• /
• 2000

The purpose of this study was to investigate the seasonal variation of PAHs and to estimate their source characteristics in Taegu area. To do this, four sampling sites were selected to represent an industrial, a traffic, a traffic & residential, and a residential area in Taegu. Total of 72 samples had been collected from January, 1999 to September, 1999 on glass micro fiber filters by high volume air sampler. The PAHs in the total suspended particulate were extracted by a soxhlet process with dichloromethane and analyzed by GC/MSD, GC/FID. A statistical analysis was performed for the PAHs data set using a principal component analysis to derive important factor inherent in the interactions among the variables. The specific conclusions of this research are: 1) There was a significant seasonal and local variation in the atmospheric concentration of PAHs. The seasonal variation is winter>spring>Fall>summer, and the local variation is industrial>traffic>graffic & residential>residential area. 2) To evaluate the correlation between a measured PAHs and other affecting factors such as air pollutant concentration and meterological data, statistical analysis was performed. PAHs and other affecting factors such as air pollutant concentration and meterological data, statistical analysis was performed. PAHs have negative correlation with temperature (r=-0.593, p<0.05), radiation(r=-0.535, p<0.05), and O3(r=-0.719, p<0.05), but have positive correlation with NO(r=0.615, p<0.05) 3)Finally, multivariate analysis was performed for the PAHs dat set to identify and to estimate the source contributions of PAHs. According to results of statistical analysis, it could be identifies as three factors such as vehicular/gasoline, vehicular/diesel, and combustion in Taegu area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.183-193
• /
• 2019

This study developed a shockwave detection and prediction of their extinction point method based on continuous wavelet transform using trajectory data from probe vehicles equipped with automotive sensors.. To analyze the effectiveness of the proposed method, this paper proposed two measures which are a distance error between the extinction points of the predictor and an time-location error of the extinction points. The proposed concept was proved using the micro simulation based experiment with three exogenous variables of traffic volume, lane-close duration, market penetration of probe vehicles. The analysis results show that the proposed method is capable of detecting the traffic shockwaves as well as predicting their extinction point, and also that the accuracy of the proposed method is highly dependent on the rate of the probe vehicles.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.93-99
• /
• 2012

This study analyzes traffic data which are collected by VDS(Vehicle Detection System) to research the relationship between spacing distribution and vehicles' relative speed. The collected data are relative speed between preceding and following vehicles, passing time and speed. They are also classified by lane and direction. For the result of the analysis, in the same platoon, we figure out that mean of spacing is 40m, which can be a value to determine section A to D. To compare spacing according to time interval, this study splits time intervals to peak hour and non-peak hour by peak hour traffic volume. In conclusion, vehicles in peak hour are in car following because most drive similar speed as preceding vehicle and they have relatively small spacing. On the other hand, non-peak hour's spacing between vehicles is bigger than that of peak hour. This implies driver's behaviors that the less spacing, the more aggressive and want to reduce their travel time in peak hour, whereas most drive easily in non-peak hour and recreational trip purpose because of less time pressure.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.151-159
• /
• 2008

Performances of retroreflectivity vary place to place, according to traffic volumes and time lengths after striping, depending on pavement marking materials and colors. The present paper uses the nation wide data of retroreflectivity, which has been collected from freeways and then tries to develop the regression curve setting traffic volume and service life as independent variables and retroreflectivities as dependent variables. The DB system includes two year's measurement in $2005{\sim}2006$ over Korean freeway pavement marking at an interval of three months for the period. The mobile measurement system, a laserlux, was employed for the purpose. The DB has provided a lot of information about materials and performance of the specific pavement marking such as geometric features, traffic volumes, material characteristics and the installation date. This study provides the comparison of pavement marking performances under diversified conditions. Based on accumulated pavement marking performances, this study provides performance curves based on the diversified factors. The goal of the retroreflectivity modeling is to develop equations that can be used to estimate an average retroreflectivity of pavement markings as a function time since application and traffic volume. After representing the variation of retroreflectivities and estimating regression curves by linear, exponential, logarithmic and power function, the regression curve which had the highest coefficient of determination and the value similar to the last field measurement was regarded as the retroreflectivity decay model. As a result of verification, the decay model showed the signification within the 90% confidence level and especially showed the clear relation with field data according to increase of cumulative vehicle exposure. Accordingly, these models can be used to determine service lives, retroreflectivity degradation rates, and retroreflectivity of new markings.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.131-138
• /
• 2013

PURPOSES : The intents of the study are to identify the accident factors and to demonstrate the potentials of tobit model as a tool to study the number of accidents on arterial roads segments. METHODS : This paper uses a tobit regression as a methodology to analyze the factors affecting the number of accidents. In pursuing the above goal, this study gives particular attentions to analyzing the data of 2,446 accidents (1,610 in major arterial roads and 836 in minor arterial roads) occurred on arterial roads in 2007 to 2010. RESULTS : First, 3 accident models which were classified by total arterial roads, major arterial roads and minor arterial roads, and were all statistically significant were developed. Second, the exclusive right-turn lane as common variable, and the number of accident, traffic volume, number of lanes, link length, rate of median, number of entrances, number of pedestrian crossings, number of curves, number of bus stops and exclusive left-turn as specific variables of the models were selected. Finally, the paired sample t-test could not be rejected the null hypotheses of three types of models. CONCLUSIONS : Using data from vehicle accidents on arterial roads, the estimation results show that many factors related to roadway geometrics and traffic characteristics significantly affect to the number of accidents.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1799-1810
• /
• 2011

Origin-Destination(OD) trip survey being used in travel demand forecasting has been obtained through totalizing process with direct sample survey techniques such as plate license survey, roadside interview, household travel survey, and cordon line counts. However, the OD survey has many discrepancies in sampling, totalizing process, and such discrepancies contains problems of difference between forecasted traffic volume and observed data. On the other hand, transit smart card data recently collected has credible resource of obtaining travel information for bus and metro. This paper presents parameter estimation of gravity model by using transit smart card data. Through the parameter estimation method, we estimated =0.57, ${\beta}$=0.14 of gravity model for bus, and ${\alpha}$=-0.21, ${\beta}$=0.05 for metro. The statistical test such as T-test, coefficient of correlation, Theil`s inequality coefficient showed no difference between observed volume and estimated volume. Elasticities of bus and metro derived in this paper are also reasonable.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.49-56
• /
• 2021

The purpose of this study is to develop a methodology to select a cluster of night traffic accidents using CRP (Continuous Risk Profile) analysis. the other purpose of this study is to present the characteristics of the traffic accident cluster section selected at night using CRP analysis. The CRP analysis was performed considering traffic volume of target routes through traffic accident data. In addition, variables were set according to the freeway sections. the method of subtracting the daytime CRP from the nighttime CRP was used to analyze the nighttime traffic accident. As a result, Using the CRP analysis, the sections of hotspot were identified and plotted based on traffic accidents. Also, the sections where traffic accidents are frequent were those where IC or Tunnels were installed, and there was a deviation from the general section. In conclusion, CRP analysis could be used to calculate the frequent section of specialized traffic accidents at night, and it was selected as a point in need of improvement due to the frequent occurrence of specialized traffic accidents at night in the section where IC or tunnel facilities are installed. In addition, it is inferred that the number of specialized traffic accidents at night in the section where IC or tunnel facilities are installed is a factor in the problem of night visibility due to lighting facilities.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.137-148
• /
• 2005

The position information of individual vehicles on a road at every time instant can be used to analyze the microscopic behaviors of driving of each vehicle. The limited information obtained from previous imaging technology such as traffic volume and interval velocity cannot be used to explore such microscopic traffic conditions. Also, information gathering for the microscopic behaviors by manual analysis of captured video takes large amount of time and man-power. In the paper we develop the rule-based vehicle tracking technology from which the position information of individual vehicles on a road at every time instant can be automatically obtained. Also, we extract the position data of driving vehicles on a road, length of 130m for every 0.05 second, and calculate the velocity of each traced vehicles to compare with the real velocity for the verification of accuracy. In the future, this type of tracking techniques based on video analysis can be widely used to provide the practically important information of road traffic conditions and to analyze the academically important microscopic behaviors of driving patterns.