• Journal of Korean Society of Transportation
• /
• v.14 no.3
• /
• pp.127-141
• /
• 1996

This paper presents a unique approach to urban traffic network signal control. This paper begins with an introduction to traffic control in general, and then goes on to describe the approach of fuzzy control, where the signal timing parameters at a given intersection are adjusted as functions of the local traffic network condition and adjacent intersection. The signal timing parameters evolve dynamically using only local information to improve traffic signal flow. The signal timing at an intersection is defined by three parameters : cycle time, phase split, off set. Fuzzy decision rules are used to adjust three parameters based only on local information. The amount of change in the timing parameters during each cycle is limited to a small fraction of the current parameters to ensure smooth transition. In this paper the effectiveness of this method is showed through simulation of the traffic signal flow in a network of controlled intersection.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.21-27
• /
• 2018

This paper proposed the real-time monitoring methodology of a traffic signal controller. The proposed methodology is based on the simulation technology, and it is necessary to construct a simulation model imitating the behavior of a traffic signal controller. By executing the simulation model, we can obtain the 'nominal system trajectory' of the traffic signal controller. On the other hand, an IoT(Internet of Things)-based monitoring device is implemented in a traffic signal controller. Through the monitoring device, it is possible to obtain the 'actual system trajectory'. By comparing the nominal system trajectory and the actual system trajectory, we can estimate the degree of deterioration of a traffic signal controller.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.365-370
• /
• 2004

In this paper, we wish to construct a optimal traffic cycle using wire remote control. if police vehicle or ambulance suddenly enter the traffic intersection, it will increase the traffic accident. In this paper, wireless traffic light use the radio traffic control signal and research about the hardware manufacture to check special detectors on urgency vehicles may safety and rapidly enter traffic intersection. Also, this paper present a traffic signal control conditions that analyzes different traffic intersection flows in cases of saturated flows, where the real traffic volume demand is large and the capacity constraints of bottlenecks have significant effects on the flow patterns. Through computer simulation this wireless traffic light has been proven to be much more safety and efficient than fixed traffic signal light which does not considering emergency vehicles for safety escort.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1504-1507
• /
• 1997

In this paper, we investigate a traffic flow modeled by stochastic Petri nets. The model consists of two parts : the traffic flow model and signal controller model. These models are used for analyzing the flow of the traffic intersection. The results of the evaluation are derived from a Petri Net-based simulation package, Greatspn. Through simulation we compare the performances of the pretimed signal controller with those of the trafic-adaptive signal controller.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.49-58
• /
• 2010

The traffic signal controllers being used in the domestic currently are being manufactured based on the korean national police standard which was developed for controlling the quad-light traffic signal having the red, yellow, left-turn arrow, and green lights. But according to the national policy for the traffic operation, they have to be changed to be able to switch the tri-light signal having red, yellow and green lights. In this study, a new tri-light traffic signal controller was designed and developed by the way improving the Signal Control Unit of the existing quad-light standard traffic controller. The Load Signal Unit(LSU) was improved to output 6 signals which are the two assemblies of three signal indications having the red, yellow, and green lights. To enough traffic signals output to control each directional movements and the various transport modes which are car, bus, bike, and pedestrian etc., the connector bus system was designed to be able to accommodate maximum 96 signals outputs being constructed by 16 LSUs. Flasher device was developed to be able to support maximum 32 red signals. In the software, the communication protocol between traffic control center and the traffic signal controller was improved and new signal map code values were defined for the developed LSU controlling the quad-light traffic signal. A model of the quad-light traffic signal controller developed and was tested three operations, protocol-operation, remote-command and control-mode. The test result operated all of them successfully.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.735-738
• /
• 1997

The traffic congestion caused by the exploding increase of vehicles became one of the severest social problems. Among the various approaches to solve this problem, controlling the length of traffic signals appropriately according to the individual traffic situation would be the most plausible and cost-effective method. To design a traffic signal controller which has such a property as adaptive decision-making process, we adopt fuzzy logic control method(fuzzy traffic signal controller), Moreover, using genetic algorithms we obtain an optimized fuzzy traffic signal controller (GA-fuzzy traffic signal controller). To evaluate and validate the proposed fuzzy and GA-fuzzy traffic signal controller, simulation results are presented.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.501-504
• /
• 2004

Straight traffic signal information is understanded by roation traffic signal.Ten traffic rotation street flew system saturated without forseed quantaty of traffic vehicle and length oftraffic street.Optimul traffic signal forcasting is needed departmemtstore sale season. for solution of this problem, at least before 10 hour traffic quantity reported policy department.For traffic forcasting of traffic jamed building pushed vehicle, neural network method is adapted Single traffic network is more needed to through traffic signal compared of traffic network. traffic network system is first analysed for artificial traffic network system and networked traffic systen is constructed by ubiquatous.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.472-478
• /
• 2017

In this paper, we deals with optimizing traffic signal timing in grid networks by using a network topology design method. Optimizing traffic signal timing includes minimizing delay time delay between departure and destination by interlocking straight traffic signal in the minimum spanning tree(MST). On the assumption that users of network abide by the paths provided in this paper, this paper shows optimizing traffic signal timing in grid networks. the paths provided in this paper is gathered by using Dijkstra algorithm used in computer networks. The results indicate minimizing delay time of passing through the grid network and interlocking traffic signal in the grid network.

• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.48-54
• /
• 2023

Nowadays, a blind man finds it very difficult to cross the roads. They should be very vigilant with every step they take. To resolve this problem, Convolutional Neural Networks(CNN) is a best method to analyse the data and automate the model without intervention of human being. In this work, a traffic signal recognition system is designed using CNN for the visually impaired. To provide a safe walking environment, a voice message is given according to light state and timer state at that instance. The developed model consists of two phases, in the first phase the CNN model is trained to classify different images captured from traffic signals. Common Objects in Context (COCO) labelled dataset is used, which includes images of different classes like traffic lights, bicycles, cars etc. The traffic light object will be detected using this labelled dataset with help of object detection model. The CNN model detects the color of the traffic light and timer displayed on the traffic image. In the second phase, from the detected color of the light and timer value a text message is generated and sent to the text-to-speech conversion model to make voice guidance for the blind person. The developed traffic light recognition model recognizes traffic light color and countdown timer displayed on the signal for safe signal crossing. The countdown timer displayed on the signal was not considered in existing models which is very useful. The proposed model has given accurate results in different scenarios when compared to other models.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1934-1937
• /
• 2022

The meaning of crosswalks and traffic lights in modern society has changed a lot as the enforcement of traffic signal violations has been strengthened. In this paper, we present a new next-generation traffic light method using radar and Can-bus communication methods suitable for the new traffic signal enforcement system. This method is a system that prevents accidents by transmitting information on the entry of a person and a car to a traffic light in a place where a person and a car passing through a mutually invisible traffic light cannot be seen. Since this system has only been developed for a month, it may be somewhat lacking in experimentation. However, in just one month, there have been no incidents except for a few people where the system has been installed.