• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2D
• /
• pp.111-119
• /
• 2012

In this study, the effect of safety improvement project was analyzed, and a decision making model for traffic accident reduction measures was suggested. The results of this study are as follow; First the overall number of traffic accidents and casualties were reduced, especially reduced the number of unauthorized crossing and centerline encroachments was remarkable. Second, the priorities of traffic accident reduction measures. through hazards roadway section improvement projects were determined. As, higher level evaluation items of AHP hierachy structure include civil facilities and transportation facilities. The civil facilities has 6 lower level evaluation items and transportation facilities has 4 items. The results of this study, It was revealed that traffic experts prefer civil facilities more than transportation facilities and the top 2 items of the each data (or index) took over 50%. In addition, one of the last evaluation contents through the verification, the top 3 items of civil facilities took 55.38%. The project according to the improvement projects for hazards roadway reduced traffic accidents and casualties as well as saving the cost. So these results should be available for basic information for the countermeasure about reducing the traffic accidents by local governments.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.17-28
• /
• 2008

Favorable policies for freight vehicles (i.e., trucks), such as exclusive "Truck-ways," have been proposed, and at the same time restricted policies for freight vehicles have been suggested because transportation of goods by truck aggravates traffic congestion and environmental conditions in urban areas. This study discusses the limitations of assessment processes for freight vehicle route management systems which have been carried out from limited perspectives such as physical distribution efficiency and traffic circulation. The objective of this study is to propose an assessment method of truck route management systems in urban areas which includes more varied criteria. This research modified the two existing assessment indices of physical distribution efficiency and traffic circulation. In addition two new assessment indexes are proposed: (i) exposure indices for population directly influenced by nitrous oxide, a representative pollutant, and (ii) a friction index between trips for attending elementary school and freight vehicle trips. It was found that from the perspective of physical distribution efficiency and traffic circulation, the "before" alternative is better than "after". However, from the aspect of traffic safety and environmental impacts the "after" alternative is better than "before". It is expected that the proposed evaluation method in this study would be useful when identifying reasonable policies for truck route management in urban areas.

• Journal of Korean Society of Transportation
• /
• v.34 no.4
• /
• pp.341-353
• /
• 2016

Highway is mainly in charge of middle-long distance of vehicular travel. Trip length has shown a growing trend due to increased commute distances by the relocation of public agencies. For this reason, the proportion of driver-driven accidents, caused by their fatigue or sleepiness, are very high on highways. However, existing studies related to accident prediction have mainly considered external factors, such as road conditions, environmental factors and vehicle factors, without driving behavior. In this study, we suggested an accident index (FDR, Fatigued Driving Rate) based on traffic behavior using large-scale Car Navigation path data, and exlpored the relationship between FDR and traffic accidents. As a result, FDR and traffic accidents showed a high correlation. This confirmed the need for a paradigm shift (from facilities to travel behavior) in traffic accident prediction studies. FDR proposed in this study will be utilized in a variety of fields. For example, in providing information to prevent traffic accidents (sleepiness, reckless driving, etc) in advance, utilization of core technologies in highway safety diagnostics, selection of priority location of rest areas and shelter, and selection of attraction methods (rumble strips, grooving) for attention for fatigued sections.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.4
• /
• pp.78-96
• /
• 2023

Urban traffic information is collected by various systems such as VDS, DSRC, and radar. Recently, with the development of deep learning technology, smart intersection systems are expanding, are more widely distributed, and it is possible to collect a variety of information such as traffic volume, and vehicle type and speed. However, as a result of reviewing related literature, the performance evaluation criteria so far are rbs-based evaluation systems that do not consider the deep learning area, and only consider the percent error of 'reference value-measured value'. Therefore, a new performance evaluation method is needed. Therefore, in this study, individual error, interval error, and overall error are calculated by using a formula that considers deep learning performance indicators such as precision and recall based on data ratio and weight. As a result, error rates for measurement value 1 were 3.99 and 3.54, and rates for measurement value 2 were 5.34 and 5.07.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.704-711
• /
• 2015

In this study, we have conducted a survey of AHP technique through the ocean experts to derive new items and revise assessment items and indices for risk of sunken ships based on the survey results. As a result of the survey, two new items such as accident cause and tidal current are derived. And it shows that existing items such as toxic liquid substance, remaining oil and explosive gas which were evaluated as one group are desirable to be evaluated respectively. Accordingly, we analyze the indices of the new eleven assessment items adjusted from the existing seven assessment items. As a result, the indices are ordered by toxic liquid substance, possibility of leaking, explosive gas, carrying capacity of fuel oil, sensitivity of sea environment, marine traffic environment, cause of accident, tidal current, keel clearance, ship type, and ship size. Especially, as compared with the indices of existing assessment items, the indices of sensitivity of sea environment and possibility of leaking are higher and the index of keel clearance is lower.

• Smart Structures and Systems
• /
• v.30 no.6
• /
• pp.661-671
• /
• 2022

Stayed cables are the key components for transmitting loads in cable-stayed bridges. Therefore, it is very important to evaluate the cable force condition to ensure bridge safety. An online condition assessment and anomaly localization method is proposed for cables based on the spatiotemporal correlation of grouped cable forces. First, an anomaly sensitive feature index is obtained based on the distribution characteristics of grouped cable forces. Second, an adaptive anomaly detection method based on the k-nearest neighbor rule is used to perform dissimilarity measurements on the extracted feature index, and such a method can effectively remove the interference of environment factors and vehicle loads on online condition assessment of the grouped cable forces. Furthermore, an online anomaly isolation and localization method for stay cables is established, and the complete decomposition contributions method is used to decompose the feature matrix of the grouped cable forces and build an anomaly isolation index. Finally, case studies were carried out to validate the proposed method using an in-service cable-stayed bridge equipped with a structural health monitoring system. The results show that the proposed approach is sensitive to the abnormal distribution of grouped cable forces and is robust to the influence of interference factors. In addition, the proposed approach can also localize the cables with abnormal cable forces online, which can be successfully applied to the field monitoring of cables for cable-stayed bridges.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.124-140
• /
• 2017

There exists a limitation to provide proper advance information for safe maneuvering through guidance and caution signs in freeway mobile work zones, unlike fixed work zones. Although a work-protection vehicle is currently deployed at the rear of the work vehicle, more active countermeasures to prevent crashes are required. The purpose of this study was to propose a method to evaluate the safety in mobile work zones and to present effective countermeasures. Driving simulation experiments were conducted to analyze characteristics of driver's behavior in mobile and fixed work zones. Safety distance index (SDI) based on the comparison of stopping distances of a work-protection vehicle and a following subject vehicle was used to evaluate traffic safety. More dangerous driving behavior was observed in the mobile work zone. Especially, it was identified that the lane-change of vehicles following the work- protection vehicle was late. Therefore, it is necessary to actively introduce methods to provide warning information so that the driver can recognize the work-protection vehicle in advance and carry out appropriate evasive maneuvers.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.39-52
• /
• 2006

This study divided the large-scale traffic accident locations into its own characteristics by using Cluster Analysis. Also, Quantification II and Classification and Regression Tree methods were used enabling evaluation for the amount of affecting influence by the crash type. After these analyses, we tested the fitness of the results and suggested the simplification of the quantification index. With the results from the discussed procedure, obvious differences were observed by groups according to the characteristics of crash type from the Discrimination and Classification analysis of divided four groups. Thus, measures and supplementary measures for the traffic accidents could be suggested in groups systematically. However, a lot of missing values in variables caused a huge loss of data and made this study difficult for more detailed analysis, With this difficulty. recording mandatory log files with a standardized format is also recommended to Prevent this Problem in advance.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.75-85
• /
• 2006

Currently, cross-section design can not reflect highway function and traffic volume, various construction. This research paper provides analysis of traffic accident type, improvement of traffic operation and safety, assessment for new cross-section standards of two-lane highway. Research show higher accident rate on 6$\sim$8.9m road than 9$\sim$12.9m road width in two-lane highway. Typical improvement is widening on lane and shoulder width. Simulation show large increase on 6$\sim$7m road delay-time in 1,200vph. In contrast 10$\sim$11.5m road shows slight change on delay-time. This research paper provides various cross-section construction by traffic volume in minor arterial and distributor two-lane highway. The new cross-section design provides adopting highway volume, various construction and flexibility.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.1
• /
• pp.1-12
• /
• 2014

Living environments in rural area have become deteriorated rapidly. Increase of aging population, decline in agricultural income, polarization of wealth in rural community due to rural returners have caused severe decline and imbalance of living environments in rural area. Responding to this circumstances, governments currently develop projects for improving living environments focusing on individual housing which were excluded from governmental supports because those had been regarded as private property. Nevertheless, there are still some gaps and problems in evaluating the quality of living environment and suggesting effective solutions. It would be because standards and guidelines of the projects have been based on urban housing system. In order to support the implementation of the projects, this research has developed an index for evaluating and monitoring the quality of living environments in rural area. By applying Delphi method, the index has been created in four categories of 'security', 'convenience', 'comfortability', and 'durability' 'Security' consists of structural safety, crime, disaster, accident prevention. 'Convenience' includes three divisions of living, traffic, farm working. 'Comfortability' is divided into sanitation, indoor environments, and aesthetic appreciation. Lastly, 'durability' has four divisions of energy conservation, environmental friendliness, efficiency, and economics. Each sub-division also has different items from three to twelves. In the case of an index for performance evaluation, items have been derived from energy conservation(6-items), and environmental friendliness(7-items). Items developed as an index for evaluating rural living environments in this research might be good background information for remodeling project in rural housing development.