• Journal of radiological science and technology
• /
• v.32 no.3
• /
• pp.299-306
• /
• 2009

Purpose : To compare radiation dose for coronary CT angiography (CTA) obtained with 6 examination protocols such as a retrospectively ECG gated helical scan, a prospectively ECG gated sequential scan, low kVp technique, and cardiac dose modulation technique. Materials and Methods : Coronary CTA was performed by using 6 current clinical protocols to evaluate effective dose and organ dose in primary beam area with anthropomorphic female phantom and glass dosimetric system in 64 channel multi-detector CT. After acquiring topograms of frontal and lateral projection with 80 kVp and 10 mA, main coronary scan was done with 0.35 sec tube rotation time, 40 mm collimation ($0.625\;mm{\times}64\;ea$), small scan field of view (32 cm diameter), 105 mm scan length. Heart beat rate of phantom was maintained 60 bpm in ECG gating. In constant mAs technique 120 kVp, 600 mA was used, and 100 kVp for low kVp technique. In a retrospectively ECG gated helical CT technique 0.22 pitch was used, peak mA (600 mA) was adopted in range of $40{\sim}80%$ of R-R interval and 120mA(80% reduction) in others with cardiac dose modulation. And 210 mAs was used without cardiac dose modulation. In a prospectively ECG gated sequential CT technique data were acquired at 75% R-R interval (middle diastolic phase in cardiac cycle), and 120 msec additional padding of the tube-on time was used. For effective dose calculation region specific conversion factor of dose length product in thorax was used, which was recommended by EUR 16262. Results : The mean effective dose for conventional coronary CTA without cardiac dose modulation in a retrospectively ECG gated helical scan was 17.8 mSv, and mean organ dose of heart was 103.8 mGy. With low kVp and cardiac dose modulation the mean effective dose showed 54.5% reduction, and heart dose showed 52.3% reduction, compared with that of conventional coronary CTA. And at the sequential scan(SnapShot pulse mode) under prospective ECG gating the mean effective dose was 4.9 mSv, this represents an 72.5% reduction compared with that of conventional coronary CTA. And heart dose was 33.8 mGy, this represents 67.4% reduction. In the sequential scan technique under prospective ECG gating with low kVp the mean effective dose was 3.0 mSv, this represents an 83.2% reduction compared with that of conventional coronary CTA. And heart dose was 17.7 mGy, this represents an 82.9% reduction. Conclusion : In coronary CTA at retrospectively ECG gated helical scan, cardiac dose modulation technique using low kVp reduced dose to 50% above compared with the conventional helical scan. And the prospectively ECG gated sequential scan offers substantially reduced dose compared with the traditional retrospectively ECG gated helical scan.

• Asia pacific journal of information systems
• /
• v.21 no.4
• /
• pp.45-62
• /
• 2011

The notion of information systems (IS) continuance has recently emerged as one of the most important research issues in the field of IS. A great deal of research has been conducted thus far on the basis of theories adapted from various disciplines including consumer behaviors and social psychology, in addition to theories regarding information technology (IT) acceptance. This previous body of knowledge provides a robust research framework that can already account for the determination of IS continuance; however, this research points to other, thus-far-unelucidated determinant factors such as habit, which were not included in traditional IT acceptance frameworks, and also re-emphasizes the importance of emotion-related constructs such as satisfaction in addition to conscious intention with rational beliefs such as usefulness. Experiences should also be considered one of the most important factors determining the characteristics of information system (IS) continuance and the features distinct from those determining IS acceptance, because more experienced users may have more opportunities for IS use, which would allow them more frequent use than would be available to less experienced or non-experienced users. Interestingly, experience has dual features that may contradictorily influence IS use. On one hand, attitudes predicated on direct experience have been shown to predict behavior better than attitudes from indirect experience or without experience; as more information is available, direct experience may render IS use a more salient behavior, and may also make IS use more accessible via memory. Therefore, experience may serve to intensify the relationship between IS use and conscious intention with evaluations, On the other hand, experience may culminate in the formation of habits: greater experience may also imply more frequent performance of the behavior, which may lead to the formation of habits, Hence, like experience, users' activation of an IS may be more dependent on habit-that is, unconscious automatic use without deliberation regarding the IS-and less dependent on conscious intentions, Furthermore, experiences can provide basic information necessary for satisfaction with the use of a specific IS, thus spurring the formation of both conscious intentions and unconscious habits, Whereas IT adoption Is a one-time decision, IS continuance may be a series of users' decisions and evaluations based on satisfaction with IS use. Moreover. habits also cannot be formed without satisfaction, even when a behavior is carried out repeatedly. Thus, experiences also play a critical role in satisfaction, as satisfaction is the consequence of direct experiences of actual behaviors. In particular, emotional experiences such as enjoyment can become as influential on IS use as are utilitarian experiences such as usefulness; this is especially true in light of the modern increase in membership-based hedonic systems - including online games, web-based social network services (SNS), blogs, and portals-all of which attempt to provide users with self-fulfilling value. Therefore, in order to understand more clearly the role of experiences in IS continuance, analysis must be conducted under a research framework that includes intentions, habits, and satisfaction, as experience may not only have duration-based moderating effects on the relationship between both intention and habit and the activation of IS use, but may also have content-based positive effects on satisfaction. This is consistent with the basic assumptions regarding the determining factors in IS continuance as suggested by Oritz de Guinea and Markus: consciousness, emotion, and habit. The principal objective of this study was to explore and assess the effects of experiences in IS continuance, with special consideration given to conscious intentions and unconscious habits, as well as satisfaction. IN service of this goal, along with a review of the relevant literature regarding the effects of experiences and habit on continuous IS use, this study suggested a research model that represents the roles of experience: its moderating role in the relationships of IS continuance with both conscious intention and unconscious habit, and its antecedent role in the development of satisfaction. For the validation of this research model. Korean university student users of 'Cyworld', one of the most influential social network services in South Korea, were surveyed, and the data were analyzed via partial least square (PLS) analysis to assess the implications of this study. In result most hypotheses in our research model were statistically supported with the exception of one. Although one hypothesis was not supported, the study's findings provide us with some important implications. First the role of experience in IS continuance differs from its role in IS acceptance. Second, the use of IS was explained by the dynamic balance between habit and intention. Third, the importance of satisfaction was confirmed from the perspective of IS continuance with experience.

• Journal of Life Science
• /
• v.30 no.4
• /
• pp.331-342
• /
• 2020

The suppression of neuroinflammatory responses in microglial cells can be considered a key target for improving the progression of neurodegenerative diseases such as Alzheimer's disease (AD), Parkinson's disease (PD), and Huntington's disease (HD). Asparagus cochinchinensis has traditionally been used as a medicine to treat fever, cough, kidney disease, breast cancer, inflammatory diseases, and brain diseases. In this study, we investigated the neuroprotective mechanism of an aqueous extract from A. cochinchinensis root (AEAC), particularly its anti-inflammatory effects on lipopolysaccharide (LPS)-activated BV-2 microglial cells. BV-2 cells were treated with four different concentrations of AEAC. No significant toxicity was detected in BV-2 cells treated with AEAC. Nitric oxide (NO), cyclooxygenase-2 (COX-2) mRNA, and inducible nitric oxide synthase (iNOS) mRNA levels were 21% lower in the AEAC+LPS group than in the Vehicle+LPS group. Lower proinflammatory (TNF-α and IL-1β) and anti-inflammatory cytokine (IL-6 and IL-10) levels were also detected in the AEAC+LPS group than in the Vehicle+LPS group, albeit at varying rates. Moreover, the phosphorylation of mitogen-activated protein kinase (MAPK) members after LPS treatment was significantly recovered in the AEAC-pretreated group compared to the Vehicle+LPS group, enhancement of the phosphorylation of mitogen-activated protein kinase (MAPK) members after LPS treatment was significantly recovered in the AEAC-pretreated group, while cell cycle arrest at the G2/M phase caused by LPS treatment was less severe in the AEAC+LPS group. The increase in reactive oxygen species (ROS) generation induced by LPS treatment was also lower in the AEAC-pretreated group than in the Vehicle+LPS group. This is the first study to show that AEAC exerts anti-neuroinflammatory activity against LPS stimulation by regulating the MAPK signaling pathway, the cell cycle, and ROS production.

• Journal of Food Hygiene and Safety
• /
• v.24 no.4
• /
• pp.318-323
• /
• 2009

Dahi is yoghurt like fermented dairy products available in Bangladesh made by traditional ways from raw milk. The aim of the present study was to check and compare the present quality status of the market dahi in reference to laboratory made dahi. For this, dahi was prepared in the laboratory (A) and collected from Kishoregonj district (B), Gazipur district (C), Bogra district (D) and Dhaka district (E and F). Consumer acceptance quality was judged on 100 point by a judge panel and chemical and microbiological quality test were done by established methods. 'A' type dahi was superior followed by E, D, F, B and C considering the consumer acceptance quality parameter. From chemical test, it appears that, B possess the lowest pH ($3.75\;{\pm}\;0.05$) and highest was in C ($4.46\;{\pm}\;0.15$). Total solids content of F type dahi ($318.40\;{\pm}\;4.44\;g/kg$) was highest and fat ($52.00\;{\pm}\;2.00\;g/kg$), protein ($44.33\;{\pm}\;2.00\;g/kg$) and ash ($10.76\;{\pm}\;0.31\;g/kg$) content were also higher in F type dahi. E and A type dahi were also with considerable figure in chemical quality parameter. Dahi B was inferior in respect of microbiological quality- total viable count (TVC) (${\times}\;10^5\;cfu/ml$) content was $94.00\;{\pm}\;4.58$, yeast (cfu/ml) content was $183.33\;{\pm}\;15.28$ and mold (cfu/ml) content was $53.33\;{\pm}\;15.28$. The TVC (${\times}\;10^5\;cfu/ml$), yeast (cfu/ml) and mold (cfu/ml) content of A type dahi were $39.67\;{\pm}\;4.51$, $50.00\;{\pm}\;10.00$ and $20.00\;{\pm}\;10.00$, respectively. Considering all the three major quality aspects dahi A was superior than others followed by F, D, E, C and B.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.451-461
• /
• 2015

In megavoltage (MV) radiotherapy, delivering the dose to the target volume is important while protecting the surrounding normal tissue. The purpose of this study was to evaluate the modulation transfer function (MTF), the noise power spectrum (NPS), and the detective quantum efficiency (DQE) using an edge block in megavoltage X-ray imaging (MVI). We used an edge block, which consists of tungsten with dimensions of 19 (thickness) ${\times}$ 10 (length) ${\times}$ 1 (width) $cm^3$ and measured the pre-sampling MTF at 6 MV energy. Various radiation therapy (RT) devices such as TrueBeam$^{TM}$ (Varian), BEAMVIEW$^{PLUS}$ (Siemens), iViewGT (Elekta) and Clinac$^{(R)}$iX (Varian) were used. As for MTF results, TrueBeam$^{TM}$(Varian) flattening filter free(FFF) showed the highest values of $0.46mm^{-1}$ and $1.40mm^{-1}$ for MTF 0.5 and 0.1. In NPS, iViewGT (Elekta) showed the lowest noise distribution. In DQE, iViewGT (Elekta) showed the best efficiency at a peak DQE and $1mm^{-1}DQE$ of 0.0026 and 0.00014, respectively. This study could be used not only for traditional QA imaging but also for quantitative MTF, NPS, and DQE measurement for development of an electronic portal imaging device (EPID).

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.825-836
• /
• 2005

This study was carried out to evaluate the quality characteristics of the fermented pork with soy sauce, red pepper paste and soybean paste. The ham of pork were cut to cube (7 × 10 × 2 cm³) and Korea traditional seasonings such as soy sauce (T1), red pepper paste (T2), soybean paste (T3) were seasoned by the proportions of meat to seasonings (1:1), respectively. The pH of fermented pork with soybean paste seasoning were significantly higher compared to those for fermented pork with soy sauce and red pepper paste seasoning at 1 and 28 days of storage, but were significantly lower at 14 days of storage. The water-holding capacity of fermented pork with soy sauce seasoning were significantly higher compared to those for fermented pork with red pepper and soybean paste seasoning at 28 days of storage. The surface meat L* values of fermented pork with soybean paste seasoning were significantly higher compared to those for fermented pork with soy sauce and red pepper paste seasoning, but a* and b* values of fermented pork with red pepper paste seasoning significantly higher. The volatile basic nitrogen (VBN) of fermented pork with soybean paste seasoning were significantly lower compared to those for fermented pork with soy sauce seasoning at 1 and 28 days of storage. The shear force and thiobarbituric acid reactive substances (TBARS) of fermented pork with soybean paste seasoning were significantly lower compared to those for fermented pork with soy sauce and red pepper paste seasoning. The total plate counts of fermented pork with soybean paste seasoning were significantly higher compared to those for fermented pork with soy sauce and red pepper paste seasoning at 14 days of storage, but were significantly lower at 28 days of storage. The Escherichia coli of fermented pork with soy sauce and soybean paste seasoning were significantly lower compared to those for fermented pork with red pepper paste seasoning at 1 day of storage. The Lactobacilli spp. of fermented pork with red pepper paste seasoning were significantly lower compared to those for fermented pork with soy sauce and soybean paste seasoning.

• Science of Emotion and Sensibility
• /
• v.19 no.4
• /
• pp.21-32
• /
• 2016

Studies have observed various phenomena regarding the effect of the interaction between type, price, and brand image of a product on consumers' purchase intent and product quality perception. Yet, few have studied the effect of the interaction between product type and manufacturing method on these factors. However, the advent of three-dimensional (3D) printers added a new manufacturing method, 3D printing, to the traditional methods of handicraft and automated machine-based production, and research is necessary since this new framework might affect consumers' purchase intent and product quality perception. Therefore, this study aimed to verify the effects of the interaction between product type and manufacturing method on purchase intent and product quality perception. To achieve this, in our experiment 1, we selected product types with different characteristics (drone vs. violin vs. cup), and measured whether consumers preferred different manufacturing methods for each product type. The results showed that consumers preferred the 3D printing method for technologically advanced products such as drones, the handmade method for violins, and the automated machine-based manufacturing method, which allows mass production, for cups. Experiment 2 attempted to verify the effects of the differences in manufacturing method preferences for each product type on consumers' purchase intent and product quality perception. Our findings are as follows: for drones, the purchase intent was highest when 3D printing was used; for violins, the purchase intent was highest when the violins were handmade; for cups, the purchase intent was highest when machine-based manufacturing was used. Moreover, whereas the product quality perception for drones did not differ across different manufacturing methods, consumers perceived that handmade violins had the highest quality and that cups manufactured with 3D printing had the lowest quality (the purchase intent for cups was also lowest when 3D printing was used). This study is anticipated to provide a wide range of implications in various areas, including consumer psychology, marketing, and advertising.

• Journal of Food Hygiene and Safety
• /
• v.22 no.2
• /
• pp.120-126
• /
• 2007

Present study have been performed to develop Bulnesia sarmienti as a functional food. Methanol, n-hexane, chloroform, ethyl acetate and butanol extracts of Bulnesia sarmienti contained total phenol by 5.81 to 7.47%. It is high content than fruits which were known as high contests of total phenol. The electron donating ability of the extract of Bulnesia sarmienti were increased along with increasing concentrations of extracts. At $500{\mu}g/mL\;and\;1000{\mu}g/mL$, the all extracts showde more than 80% of scavenging abilities, which means the equal effect of the antioxidant, BHT. Nitrite scavenging abilities were measured as follows: methanol, butanol, 5.53, 5.77% at $100{\mu}g/mL$, respectively. The ethyl acetate extract was 73.29% at $1000{\mu}g/mL$ which showed the highest activity and methanol, butanol, n-hexane, chloroform and water extract were 65.65, 65.02, 47.49, 52.51, 45.54% which also showed relatively high activities. The growth inhibitory effects of each solvent extract on tumor cell were as follows: test against SUN-1, the gastric carcinoma cell, exhibited the highest inhibitory effects at $100{\mu}g/mL$ where the n-hexane extract was 61.6%. The ethyl acetate and water extracts did not revealed any inhibitory effects. Hela, the uterine carcinoma cell, exhibited the highest inhibitory effects at $100{\mu}g/mL$ where the n-hexane extract was 75.1%. The water extracts did not revealed any inhibitory effects. HT-29, the colon carcinoma cell, also exhibited the highest inhibitory effects at $100{\mu}g/mL$ where n-hexane extract was 57.4%. In conclusion, Bulnesia sarmienti have been shown the antioxidant and antitumor effects, and that it is expected to be developed as functional foods.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.661-683
• /
• 2001

There is a rapid increase in the use of digital video information in recent years, it becomes more important to manage video databases efficiently. The development of high speed data network and digital techniques has emerged new multimedia applications such as internet broadcasting, Video On Demand(VOD) combined with video data processing and computer. Video database should be construct for searching fast, efficient video be extract the accurate feature information of video with more massive and more complex characteristics. Video database are essential differences between video databases and traditional databases. These differences lead to interesting new issues in searching of video, data modeling. So, cause us to consider new generation method of database, efficient retrieval method of video. In this paper, We propose the construction and generation method of the video database based on contents which is able to accumulate the meaningful structure of video and the prior production information. And by the proposed the construction and generation method of the video database implemented the video database which can produce the new contents for the internet broadcasting centralized on the video database. For this production, We proposed the video indexing method which integrates the annotation-based retrieval and the content-based retrieval in order to extract and retrieval the feature information of the video data using the relationship between the meaningful structure and the prior production information on the process of the video parsing and extracting the representative key frame. We can improve the performance of the video contents retrieval, because the integrated video indexing method is using the content-based metadata type represented in the low level of video and the annotation-based metadata type impressed in the high level which is difficult to extract the feature information of the video at he same time.

• Journal of Korean Home Economics Education Association
• /
• v.15 no.4
• /
• pp.115-132
• /
• 2003

The purpose of this study is aimed at giving proof that helps the elementary practical arts education system accomplish as the effects are turned out experimentally. Two classes of the sixth grade of J elementary school in Dae-gu have been selected in order to be experimented. One was chosen as an experimental group, the other was done as a comparative group. The creative-problem-solving learning-model was applied to the experimental group, and the traditional way of teaching was applied to the comparative group. For four classes of the sixth grades, ‘chapter 8: Making with recycled materials’ was proceeded as the content. Then. tests about the way of environmental awareness and creativity were carried out twice. After that, the results of pre and after-test in the comparative and experiment groups were compared using the t-test method. Following the analysis of the data collected in this study. the following major observations were obtained: First, children who were educated the creative problem-solving in a practical arts education achieved higher scores than before. Therefore, it turns out that the CPS method is an effective way to improve the environmental awareness in children. It showed that it included lots of daily habits connected with daily life and it made the intention to carry out the environment-preservation stronger and children´s attitude towards the environment improved. Moreover, making with recycled materials was used to solve an environmental problem, affecting in a positive way in our life. It also made the positive recognition about the environment. Second. the application of the creative problem-solving class of the practical arts education can make positive results to children. It helped children to have more interest in the environment around them. Children´s fluency, flexibility and originality in their ideas were improved as much as possible while they were solving problems. Consequently, the application of the creative problem-solving class model of elementary practical arts environmental education lets children expand environment consciousness and creativity.