• 조명전기설비학회논문지
• /
• 제26권8호
• /
• pp.27-34
• /
• 2012

This paper proposes variable incremental conductance(IC) algorithm for maximum power point tracking(MPPT) control of photovoltaic. The conventional perturbation & observation(PO) and IC MPPT control algorithm generally uses fixed step size. A small step size reduces a tracking error in the steady state but slows a tracking speed in the transient state. Also, a large step size is fast a tracking speed but increases a tracking error. Therefore, this paper proposes variable IC MPPT algorithm that adjust automatically step size according to operating conditions. To improve a tracking speed and accuracy, when operating point is far from the maximum power point(MPP), the step size uses maximum value and when a operating point is near from the MPP, the step size uses variable step size that adjust according to slope of P-V curve. The validity of MPPT algorithm proposed in this paper prove through compare with conventional PO and IC MPPT algorithm.

• ETRI Journal
• /
• 제38권3호
• /
• pp.435-443
• /
• 2016

In this paper, an efficient beam tracking algorithm for a regularized zero-forcing (RZF) approach in slowly fading multiple-input and single-output (MISO) broadcast channels is considered. By modifying an RZF equation, an RZF beam tracking algorithm is proposed using matrix perturbation theory. The proposed algorithm utilizes both beams from the previous time step and channel difference (between the previous and current time steps) to calculate the RZF beams. The tracking performance of the proposed algorithm is analyzed in terms of the mean square error (MSE) between a tracking approach and an exact recomputing approach, and in terms of the additional MSE caused by the beam tracking error at the receiver. Numerical results show that the proposed algorithm has almost the same performance as the exact recomputing approach in terms of the sum rate.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.501-504
• /
• 2000

In this paper, performance of a pseudonoise (PN) code tracking loop is analyzed and simulated for a direct-sequence/code-division multiple access ( DS/CDMA) system with imperfect power control in a multipath fading channel. A noncoherent first-order delay-locked loop (DLL) is considered as a PN code tracking loop. Power control error is modeled as a log-normally distributed random variable. From the simulation results, it is shown that for smaller discriminator offset, tracking jitter performance is improved while MTLL performance is degraded. It is shown that large power control error and heavy shadowing substantially degrade the PN tracking performance. The analysis in this paper can be applicable to design of PN code tracking loop for a DS/CDMA system.

• 제어로봇시스템학회논문지
• /
• 제8권10호
• /
• pp.890-897
• /
• 2002

This paper deals with the reduction of trajectory tracking error by changing the initial postures of a biped robot. Gait of a biped robot depends on the constraints of mechanical kinematics and the initial states including the posture. Also the dynamic walking stability in a biped robot system is analyzed by zero moment point(ZMP) among the stabilization indices. Path trajectory, in which knee joint is bent forward like human's cases, is applied to most cases considered with above conditions. A new initial posture, which is similar to bird's gait, is proposed to decrease trajectory tracking error and it is verified through real experimental results.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.405-410
• /
• 2002

Linear motor food system control algorithm was extended to the two axis system. Among several factors considered, overshoot of the response was the most important one in minimizing position tracking error. Balance between overshoot and settling time has to be adjusted to guarantee to best tracking performance. Tracking route was carefully executed to eliminate the possible error during the machining process. Even though there exists slight discrepancy between desired mute and cutting track at the corner, precision machining could be implemented using the cutting scheme introduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.56-56
• /
• 2000

In this paper, the relationship between GPS code and carrier tracking performance is given. Through the error analysis and experiments, the performance of code tracking loop can be improved using narrow correlation. The performance of code tracking loop can be also improved if the better carrier tracking loop is used. On the other hand, the performance of carrier tracking loop is independent of that of code tracking loop.

• 한국전자파학회논문지
• /
• 제29권8호
• /
• pp.640-647
• /
• 2018

본 논문은 전투기 레이다의 표적 추적정확도(추적오차)를 분석하는 방법에 대한 연구이다. 레이다 측정 시 발생하는 측정오차, 탐지실패, radar cross section(RCS) 요동은 측정 품질을 열화시키며, 이는 추적정확도에 영향을 미치는 요인이 될 수 있다. 따라서 정확한 추적성능분석을 위해 이러한 레이다 측정 특성을 고려하는 것이 필요하다. 본 논문에서는 측정오차, 탐지확률, RCS 요동과 같은 레이다 특성을 복합적으로 활용하여 추적정확도를 분석하는 방법에 대해서 제안한다. 제안한 분석 방법을 활용한 실험을 통해 탐지확률과 RCS 요동에 의한 추적정확도 열화를 확인할 수 있었다.

• 한국전자파학회논문지
• /
• 제23권8호
• /
• pp.995-1001
• /
• 2012

본 논문에서는 다기능 레이더를 이용한 탄도탄 추적을 위해 알파-베타 필터, 칼만 필터, 탄도탄 추적 필터의 성능을 분석하였다. 제시된 필터들은 탄도탄의 궤적과 다기능 레이더의 신호처리기를 모의하는 시뮬레이터를 기반으로 시뮬레이션 되었다. 그 결과, 제안한 탄도탄 추적 필터의 성능이 알파-베타 필터에 비해 최대 75.3 %의 속도 오차 감소 효과가 있음을 확인하였다. 또한, 추적 초기화 이후에 제안한 필터가 칼만 필터보다 거리, 속도 오차가 작아 안정적인 성능을 보였다. 마지막으로 각도 추적에서도 전체 시나리오 구간에서 안정적인 동작을 확인하여 초고속 탄도탄 표적의 추적에 적합함을 입증하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권4호
• /
• pp.307-313
• /
• 2021

Modernized GNSS signal structures tend to use tiered codes, and all GNSSs use binary codes as secondary codes. However, recently, signals using polyphase codes such as Zadoff-Chu sequence have been proposed, and are expected to be utilized in GNSS. For example, there is Tiered Differential Polyphase Code (TDPC) using polyphase code as secondary code. In TDPC, the phase of secondary code changes every one period of the primary code and a time-variant error is added to the carrier tracking error, so carrier tracking ambiguity exists until the secondary code phase is found. Since the carrier tracking ambiguity cannot be solved using the general GNSS receiver architecture, a new receiver architecture is required. Therefore, in this paper, we describe the carrier tracking ambiguity and its cause in signal tracking, and propose a receiver structure that can solve it. In order to prove the proposed receiver structure, we provide three signal tracking results. The first is the differential decoding result (secondary code sync) using the general GNSS receiver structure and the proposed receiver structure. The second is the IQ diagram before and after multiplying the secondary code demodulation when carrier tracking ambiguity is solved using the proposed receiver structure. The third is the carrier tracking result of the legacy GPS (L1 C/A) signal and the signal using TDPC.

• 디지털융복합연구
• /
• 제13권1호
• /
• pp.331-339
• /
• 2015

사이버나이프치료에서 삽입된 금표지자의 삽입 개수 및 인식의 제한으로 인하여 3D DOF로 치료하는 경우 척추구조물 정렬을 가능하게 하는 Xsight spine tracking system으로 회전방향의 위치오차를 보정함으로서 표적위치오차를 개선하고, 치료방법의 대안을 제시하고자 한다. 실험결과 6D DOF에서 표적위치오차는 $0.214{\pm}0.058mm$, 종양내부에 삽입된 2개 금표지자를 이용한 3D DOF에서 $0.673{\pm}0.142mm$, 종양외부에 삽입된 2개 금표지자를 이용한 3D DOF에서 $1.126{\pm}0.253mm$, Xsight spine tracking system의 적용 한 3D DOF에서 $0.542{\pm}0.103mm$로 나타났다. 실험결과 척추 구조물로 회전방향에 대한 보정을 시행하였을 때 표적위치에 대한 정확성이 약 48% 향상되었다. 또한, 선량분포의 일치성도 약 3%가 향상되어 일치하는 것을 확인할 수 있었다. 따라서 척추구조물 정렬을 병용한 Xsight spine tracking system의 회전방향에 대한 보정은 유용한 것으로 평가 되었다.