• Structural Engineering and Mechanics
• /
• v.75 no.4
• /
• pp.497-506
• /
• 2020

CA mortar layer disengagement will give rise to the overall structural changes of the track and variation in the vibration form of the ballastless track. By establishing a vehicle-track-viaduct coupling analysis and calculation model, it is possible to analyze the CRTS-I type track structure vibration response while the track slab is disengaging with the power flow evaluation method, to compare the two disengaging types, namely partial contact loss at one edge beneath track slab and partial contact loss at midpoint beneath track slab. It can also study how the length of disengaging influences the track structures vibration power. It is showed that when the partial contact loss beneath track slab, and the relative vibration energy level between the rail and the track slab increases significantly within [10, 200]Hz with the same disengaging length, the partial contact loss at one edge beneath track slab has more prominent influence on the vibration power than the partial contact loss at midpoint beneath track slab. With the increase of disengaging length, the relative vibration energy level of the track slab grows sharply, but it will change significantly when it reaches 1.56 m. Little effect will be caused by the relative vibration energy level of the viaduct. The partial contact loss beneath the track slab will cause more power distribution and transmission between the trail and track slab, and will then affect the service life of the rail and track slab.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.513-518
• /
• 2012

In this paper, we proposed a method of fast track merging which is the foundation of track to track association technique. The existing method of track merging is performed throughout comparison between tracks to tracks. Therefore, it has heavy calculation time. In our research, we developed a method for fast clustering by using nearest neighbor measurement identification. The simulation results show that the proposed method is more faster than previous method about 3.3%. We expect that this method could be effectively used in multi-target tracking particularly in heavy clutter environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.133-138
• /
• 2016

This paper describes the track initiation and target-tracking filter for ship tracking in a marine environment by using Light Detection And Ranging (LiDAR). LiDAR with three-dimensional scanning capability is more useful for target tracking in the short to medium range compared to RADAR. LiDAR has rotating multi-beams that return point clouds reflected from targets. Through preprocessing the cluster of the point cloud, the center point can be obtained from the cloud. Target tracking is carried out by using the center points of targets. The track of the target is initiated by investigating the normalized distance between the center points and connecting the points. The regular track obtained from the track initiation can be maintained by the target-tracking filter, which is commonly used in radar target tracking. The target-tracking filter is constructed to track a maneuvering target in a cluttered environment. The target-tracking algorithm including track initiation is experimentally evaluated in a sea-trial test with several boats.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.11
• /
• pp.1125-1135
• /
• 2010

A fundamental characteristic of PMHT (Probabilistic Multi-Hypothesis Tracker) is that the number of targets and initial states of targets in the surveillance area must be a priori known. This requirement is impossible to fulfil in almost every realistic scenario. In the paper, we present two track initiation methods to solve the problem. The proposed track initiation methods are 2-point track initiation and Hough transform track initiation, and they are used to evaluate track initial states and weights for FTD (False Track Discrimination) of the PMHT algorithm. Also suggested as automatic target detection for tracking systems that combines track initiation for target detection with the PMHT algorithm for target tracking in a cluttered environment. A series of Monte-Carlo simulation runs is employed to evaluate the overall system performance with the two track initiation methods and the results are compared and analyzed.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1624-1630
• /
• 2011

Currently the train operating environment to affect track irregularity is changed rapidly such as speed-up, linear improvement and rolling stack upgrade. The recent track maintenance criteria of track irregularity was quoted from past Japan's, and the needs of revision of criteria are increased because of the rapid change in train operating environment. In case of enhance the track irregularity criteria, it secure driving safety and riding comfort but maintenance cost are increase. And also decrease ballast durability by frequent corrective work. In case of mitigate the criteria, it decrease driving safety and riding comfort, but save the maintenance cost. The study for enacting rational criteria did not carry out so far. In this study, survey the domestic and international track irregularity and case study for track irregularity inspection results and maintenance history for guideline of enacting irregularity criteria study.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2007.04a
• /
• pp.345-348
• /
• 2007

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.7
• /
• pp.683-687
• /
• 2009

Track jump control is a random access strategy for short distance movement. The most common track jump scheme is a bang-bang control of a kick and brake manner. In a conventional track jump scheme, a track-following compensator is turned off during kick and brake periods, and restarted at a target track for track pull-in. The inevitable controller switching with non-zero initial condition results in undesirable transient response, and excessive overshoot in the transient response causes track pull-in failure. In this paper, a new track jump scheme is proposed for enhancing track jump stability. Instead of control switching, internal states of a track-following controller are artificially manipulated for kick and brake actions in a digital control environment. Experimental results are provided in comparison with conventional track jumps.

• Journal of the Korean Society for Railway
• /
• v.9 no.2 s.33
• /
• pp.222-229
• /
• 2006

Recently, the development of the paved track is required as a low-maintenance of conventional line. The main reason is that the line capacity and bearing of track are increased progressively. The important factors of paved track are stability and applicability. To be based on this subject, Cement Mortar Pouring(CMP) paved track is developed. CMP paved track is a kind of ballast reinforced track using the prepacked concrete technique. The most important thing to design the paved track is to optimize the track structure considering various conditions. Because construction environment is very limited, cost is expensive and it has very complicated behavior. On this paper, structural characteristics of the paved track are investigated using the 3D finite element analysis to verify the optimized structure of the CMP track.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.4
• /
• pp.411-421
• /
• 1992

In the conventional track while scan (TWS) system, there are two major functions to be performed : detection and tracking. These two functions are normally designed and optimised independently. So TWS algorithm ignores the available decision features that can help in resolving the plot-to-track association ambiguity. Therefore conventional TWS system cna't track the targets in a densed multi-target environment. This paper presents a new TWS algorithm for multi-target track to solve the existing TWS system problem in clutter environment. The algorithm proposed in this paper is derived by modifying the part of joint probabilistic data association (JPDA) algotithm to get the one to one correspondence instead of multiple correspondence and combined with maneuvering detection logic so that it could also track the low maneuvering targets. Simulations to confirm the performance are done in crossing, parallel and maneuvering target. The proposed algorithm was successfully tracking targets above target situations.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1724-1728
• /
• 2008

Track circuit is transmitted throughout the rails. In order to insure safe and reliable operation of track circuits, the track and the environment should respect mandatory electrical characteristics. In addition, for cab signalling through track Circuit as per TVM 430, these electrical characteristics should insure the transmission to the train. Track circuits have several operation and safety functions. They can detect the train position and broken rails. When track circuits are used as track to train transmission, they also have to be powered enough to be captured by the train sensors.