• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.660-668
• /
• 2017

In this study, we conducted an assessment of the risks posed by the noxious chemicals often handled at the analysis centers of organizations involved in Work Environment Measurement (WEM) using the Chemical Hazard Risk Management (CHARM) system. For this purpose, six organizations involved in WEM located in Seoul and Gyeonggi, which conducted the risk assessment, were selected and, as a result, 29 materials were selected as chemical substances presenting a risk of exposure. In terms of their physical properties, there were 16 liquid and 10 solid materials, and for the special management materials (CMR), the findings were as follows: 'Carcinogenic' 1A - 11 and 1B - 1 (2 - 8); 'Mutagenic' 1A - 4 and 1B - 3 (2 - 8); and 'Repro-toxic' 1A - 0 and 1B - 1 (2 - 6). In the risk estimation, 30.4%, 66.1% and 3.6% of the materials presented 'low', 'average' and 'high' risks, respectively. In addition, two of these six institutions had materials presenting a 'high' risk. This study is significant in that the risk assessment was conducted using CHARM, a chemical substance assessment tool. It is expected that the results will be utilized as the basic data for safety assessment, the establishment of a plan for emergency measures and drawing up a safety management manual, and the institutional and legal management of accidents and risks in the analysis centers of organizations involved in WEM and the management of chemicals by drawing attention to the risks involved.

• Environmental Analysis Health and Toxicology
• /
• v.21 no.2 s.53
• /
• pp.197-208
• /
• 2006

The hazards of chemicals can be classified using classification criteria that are based on physical, chemical and ecotoxicological endpoints. These criteria may be developed be iteratively, based on scientific or regulatory processes. A number of national and international schemes have been developed over the past 50 years, and some, such as the UN Dangerous Goods system or the EC system for hazardous substances, are in widespread use. However, the unnecessarily complicated multiplicity of existing hazard classifications created much unnecessary confusion at the user level, and a recommendation was made at the 1992 Rio Earth summit to develop a globally harmonized chemical hazard classification and compatible labelling system, including material safety data sheets and easily understandable symbols, that could be used for manufacture, transport, use and disposal of chemical substances. This became the globally harmonized system for the Classification and Labelling of Chemicals (GHS). The developmental phase of the GHS is largely complete. Consistent criteria for categorizing chemicals according to their toxic, physical, chemical and ecological hazards are now available. Consistent hazard communication tools such as labelling and material safety data sheets are also close to finalizations. The next phase is implementation of the GHS. The Intergovernmental Forum for Chemical Safety recommends that all countries implement the GHS as soon as possible with a view to have the system fully operational by 2008. When the GHS is in place, the world will finally have one system for classification of chemical hazards.

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.143-150
• /
• 2017

A huge number of chemicals are produced and used in the world, and some of them can have negative effects on the reproductive health of workers. To date, most chemicals and work environments have not been studied for their potential to have damaging effects on the workers' reproductive system. Because of the lack of information, many workers may not be aware that such problems can be related to occupational exposures. Newly industrialized countries such as Republic of Korea have rapidly amassed chemicals and other toxicants that pose health hazards, especially to the reproductive systems of workers. This literature review provides an overview of peer-reviewed literature regarding the teratogenic impact and need for safe handling of chemicals. Literature searches were performed using PubMed, Google Scholar, and ScienceDirect. Search strategies were narrowed based on author expertise and 100 articles were chosen for detailed analysis. A total of 47 articles met prespecified inclusion criteria. The majority of papers contained studies that were descriptive in nature with respect to the Medical Subject Headings (MeSH) terms and keywords: "reproductive and heath or hazard and/or workplace or workers or occupations." In the absence of complete information about the safe occupational handling of chemicals in Republic of Korea (other than a material safety data sheet), this review serves as a valuable reference for identifying and remedying potential gaps in relevant regulations. The review also proposes other public health actions including hazard surveillance and primary prevention activities such as reduction, substitution, ventilation, as well as protective equipment.

• Fire Science and Engineering
• /
• v.17 no.3
• /
• pp.61-73
• /
• 2003

Most of the accidents occurred from the chemical plants are related to the catastrophic gas release events when the large amount of toxic materials is leaked from its storage tank or transmitting pipe lines. In this case, the greatest concerns are how the spreading behaviors of leakages are depended on the ambient conditions such as air stability and other environmental factors. Hence, we have focused on the risk assessments and consequential analysis for chlorine as an illustrative example. As appeared in the result, Fire & Explosion Index depicted it a bit dangerous with presenting the comprehensive degrees of hazard 90.7. And as a result of Phast6.0/ALOHA, the trends of each scenario appeared considerably identical although there are some differences in the resulting effects according to the input data for the Gas Model. The consequence analysis is performed numerically based on the dense gas mode. In the future, using more correct input data, material properties, and topographical configuration, the method of this research will be useful for the guideline of the risk assessment when the release of toxicants breaks out.

• Environmental Analysis Health and Toxicology
• /
• v.5 no.1_2
• /
• pp.37-44
• /
• 1990

Synthetic detergents and surfactants are in widespread usage as household and industrial detergents. Potential human toxic hazard arises following percutaneous absorption or oral ingestion of solution residues from kitchen and feeding utensils, fruits, and vegetables and contaminated water supplies. A toxicological investigations was performed with the synthetic detergents and surfactants [linear alkyl benzene sulfonate (LAS), ${\alpha}$-olefin sulfonate (AOS), sodium lauryl sulfonate (SLS), sodium lauryl ester sulfonate (SLES)］, In acute toxicity, agents were administered subcutaneously into ICR mice. In acute study, after lowering of spontaneous motility, respiratory failure, death appeared, vomitting was often associated with salivation and or retching. No sex difference was observed in LD$\sub$50/ of mice. In subacute toxicity, agents were administered orally into SD rats. Body weight increase was suppressed and there was no adverse effect on food and water consumption. The weight of organs were not changed by agents as compared with control group. No specific change was observed in biochemical and hematologicalor data.

• Journal of the Korean Home Economics Association
• /
• v.33 no.1
• /
• pp.19-32
• /
• 1995

The purpose of this study is to investigate the consumer safety problems appeared in the Korean mass media-the newspaper(the Kong-A Ilbo and the Chosun Ilbo) and the consumer magazines(the Sobija-Sidae and the Sobija) from 1991 to 1993. I use the content analysis of the articles related with consumer safety through the above mass media. The results are (1) the goods-services areas that are severe in the consumer safety problem are food, environment, medicine, electric appliances, services(restaurant, medical service), and etc. (2) the most important problem areas are Toxic ingredients(remaining agricultural chemicals and heavy metal), Food additionals, Sanitary problem, Hygiene products hazard, Safety accident, Environmental pollution, etc. (3) the goods-service area and the consumer safety problem are different according to the publication year and the mass media type.

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.57-64
• /
• 2008

The Semiconductor industry in Korea has achieved a great contribution to the growth of its economy for the last 20 years with its product export ranked to #1 nowadays. However, the working environment in semiconductor industry is always exposed to a potential risk of critical safety issue for workers with many kinds of utilities used such as toxic chemicals, gases, high vacuum and high voltages of electricity. This study is focused on empirical research to find out the factors on safety climate and to examine the relationships of safety climate and safe work behaviour in the work site of Korea semiconductor industry. As a result of simulation, a strong positive relationships and safe work behaviour have been identified in this study. Its result and implications has been discussed and suggested further studies on its limitation from this study.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.275-290
• /
• 2013

The main cause of building fire fatalities occur in the combustible material heat, smoke and toxic gases are. Building interior decoration, etc., especially as much of the harmful substances generated during combustion, and, used in domestic architecture wallpaper, ceiling, and other plastics, built-in foam insulation also analyzed recognition of fire hazards approach to test the conkalrorimiteo test, choedaeyeolbangchulryul through, chongbal heat, mass loss rate, generates carbon monoxide gas hazard ratio tests, analysis and evaluation rigid foam index testing the toxicity of hazardous material generated by performing a gas clean up and assess the material test results, the minimum order to provide data to quantify the risk of fire. Ensure fire safety of building materials, composite materials in order to test the various risk factors could be considered organic to the introduction of testing and evaluation is needed urgently.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.779-782
• /
• 2008

During the dry periods, many types of pollutant are accumulating on the paved surface by vehicle activities and accumulated various pollutants are inflowing to the near watershed areas for the rainfall periods. Also, the metals, toxic chemicals and sediments originated from bridges could be strongly influenced to the watershed areas during the runoff. The result shows that the EMC ranges for 95% confidence intervals in a bridge land use are $10.12\sim128.09mg/L$ for TSS, $6.07\sim21.15mg/L$ for BOD, $2.10\sim6.70mg/L$ for TN and $0.06\sim0.85mg/L$ for TP.

• Journal of the Korean Society of Safety
• /
• v.12 no.2
• /
• pp.87-94
• /
• 1997

If sodium azide is impinged by certain reasons, it will be produced explosives by heavy metals and toxic materials. But it is used propellent for inflating automotive safety bags and the other chemical manufacturing purpose. The investigation of thermal hazard potential of sodium azide itself and with polymers ate very important because some parts of automotives, transporting vessels of reactive chemicals and many any other constituents of structures in factories are made of polymers. The range of decomposition temperatures are about $360-380^{\circ}C$, even if it depends on heating rate and sample weight. Thermal decomposition heat of sodium azide in air is higher than in nitrogen atmosphere, because the former is included oxidizing heats of sodium metal which is made by decomposition of sodium azide to end. Especially decomposition temperature of polymers are increased on the order of bonding energy between atoms in hydrocarbon moleculars.