• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.226-241
• /
• 2020

The stability of underground mine cavity is closely related with pillar strength. The vulnerability of pillars can be judged and reinforced if the pillar strength is known. The pillar strength is affected by characteristics of discontinuities and shape of a pillar. The change of pillar strength due to a discontinuity passing through the center of a pillar, width-to-height ratio of a pillar and small joints existing within a pillar was analyzed using PFC 3D. The result showed that the pillar strength is influenced by dip angle of a discontinuity and it increases as width-to-height ratio of a pillar increases. The pillar strength decreases as the number of contained joints increases. The relationship between total trace length observable from the pillar surface and the pillar strength was regressed with exponential function. The correlation coefficient of the regression was high enough so that pillar strength can be predicted using total trace length if a joint set exists in a pillar. Lastly, the method to estimate the strength of a pillar that includes two joint sets was proposed if the joint dip angles are 60°, 30°. The method also need total trace lengths of two joint sets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.4
• /
• pp.515-524
• /
• 2001

Two experiments using growing and finishing pigs (Landrace$\times$Duroc$\times$Yorkshire) were conducted to determine the effects of different levels of vitamins and trace minerals (VTM) on growth performance, nutrient digestibility, carcass characteristics and meat quality of growing-finishing pigs, and to evaluate the suitability of vitamin-mineral levels commonly used in the swine industry in Korea. A total of 120 three crossbred (Landrace$\times$Duroc$\times$Yorkshire) growing (Experiment I: 20.90 0.44 kg average initial body weight) and finishing (Experiment II: 53.55 0.97 kg average initial body weight) were used in 6 and 9 weeks feeding trials, respectively. Pigs were allotted on the basis of sex and weight to 5 treatments with 6 replications per treatment with 4 pigs per pen in a completely randomized block design. Treatments were: 1) control, 2) fat soluble vitamin 200% vs. control, 3) water soluble vitamin 200% vs. control, 4) trace mineral 50% vs. control, 5) trace mineral 200% vs. control. In experiment I, during the overall experimental period (0 to 6 weeks, 21 to 54 kg body weight), ADG of the 200% trace mineral supplemented group was significantly higher than that of the 50% trace mineral supplemented group. There were no significant differences among other the treatments. Digestibility of crude protein was lowest in mineral 50% supplemented group (p<0.05). Calcium digestibility was significantly higher in the 200% fat soluble vitamin supplemented group than in the other treatments (p<0.05). In experiment II, during the overall experimental period (0 to 9 weeks, 54 to 106 kg body weight), growth performance was not significantly affected by dietary vitamin and trace mineral levels. However, increasing level of water soluble vitamins at the level of 200% compared to control had a tendency to improve the overall growth performance. Overall carcass characteristics except for carcass length did not differ among pigs fed the dietary treatments. Loin eye area, pH, drip loss and shear force of meat were not affected by dietary vitamin and trace mineral levels. There was a trend for less fat content (%) in pork when the level of vitamin and trace mineral was increased, but the difference was not significant. Flavor score was the lowest in control and highest in the 200% fat soluble vitamin supplemented group (p<0.05). Juiciness of muscle was lower in the 200% fat soluble vitamin supplemented group than other dietary treatments, except for trace mineral 50% supplemented group (p<0.05). Based on these results, it is suggested that "typical" commercial levels of vitamin and trace minerals used by feed companies in Korea are sufficient to meet requirement for the maximum growth of growing-finishing pigs. Our results suggests that a reduction in trace mineral levels in commercial diets could be considered to reduce feed cost and nutrient excretion with economic and environmental benefits.

• Journal of the Ergonomics Society of Korea
• /
• v.14 no.2
• /
• pp.87-104
• /
• 1995

This research investigates the possibility of using the postural sway of patients as a reference for measruing the progress of the disease and healing of patients who received total hip replacement; the progress of the disease by X-ray pictures, the pain felt by the patients, and the difficulties encountered in moving the joints. The measurements on the force platform were taken during a 25 second period standing on both feet and during a 5 second period standing on one foot with both eyes open. The result of the research showed that the trace and area of the overall length of postural sway was a good indicator which represented the healing progress of the patients who received total hip replacement, and the weakening of the muscles and the recovery process for 3 or 4 month after receiving the operation, which did not appear on X-ray pictures, were exhibited on the postural sway. Finally, standing on a single foot represented the healing progress much better than standing on both feet.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.174-183
• /
• 2022

This study was conducted to investigate the effect of the active exercise program using sling on the pain and balance of total knee replacement patients. Subjects were 20 patients who received total knee replacement and are hospitalized, 10 patients in each group were randomly assigned to a group (CPM group) that applied only CPM (Continuous passive motion) and a group (CSG) that combined CPM with a active exercise program using sling. CG was performed CPM 5 days a week, CSG performed CPM 2 days a week and a active exercise program using sling 3 days a week, and each intervention was performed for 40 minutes a day for a total of 4 weeks. Pain was evaluated using VAS (Visual analog scale), and balance was measured using BT4 (Balance training 4) to measure C90 area, trace length, and Sway average velocity with eyes open and closed. As a result, there was a significant decrease in pain in both groups, and there was also a significant difference in the amount of change between groups. In balance, all variables except C90 of CG showed significant changes after intervention, and there was a significant difference between C90 and Vel with eyes closed in the amount of change between groups. Therefore, we believe that CPM and active exercise program using sling are effective interventions to reduce pain and improve balance in total knee replacement patients.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.2
• /
• pp.252-262
• /
• 2018

Objective: An experiment was conducted to evaluate dietary supplemental trace mineral source and deletion on mineral content in tissues. Methods: Weanling crossbred pigs (n = 144; 72 barrows and 72 gilts; body weight [BW] = $7.4{\pm}1.05kg$) were used. A basal diet was prepared, and trace mineral premix containing either inorganic (ITM) or organic (OTM) trace minerals (Cu, Fe, Mn, and Zn) was added to the basal diet. Pigs were blocked by sex and BW and randomly allotted to 24 pens for a total of 6 pigs per pen, and fed a diet containing either ITM or OTM supplemented at the 1998 NRC requirement estimates for each of 5 BW phases (Phase I to V) from 7 to 120 kg. The trace mineral supplementation was deleted for 6, 4, 2, and 0 wk of Phase V; regarding nutrient adequacy during this phase, the indigenous dietary Fe and Mn was sufficient, Cu was marginal and Zn was deficient. Results: At the end of Phase IV, Mn content (mg/kg on the dry matter basis) was greater (p<0.05) in heart (0.77 vs 0.68), kidney (6.32 vs 5.87), liver (9.46 vs 8.30), and longissimus dorsi (LD; 0.30 vs 0.23) of pigs fed OTM. The pigs fed OTM were greater (p<0.05) in LD Cu (2.12 vs 1.89) and Fe (21.75 vs 19.40) and metacarpal bone Zn (141.86 vs 130.05). At the end of Phase V, increased length of deletion period (from 0 to 6 wk) resulted in a decrease (linear, p<0.01) in liver Zn (196.5 to 121.8), metacarpal bone Zn (146.6 to 86.2) and an increase (linear, p<0.01) in heart Mn (0.70 to 1.08), liver Mn (7.74 to 12.96), and kidney Mn (5.58 to 7.56). The only mineral source by deletion period interaction (p<0.05) was observed in LD Zn. Conclusion: The results demonstrated differential effects of mineral deletion on tissue mineral content depending on both mineral assessed and source of the mineral.

• Current Optics and Photonics
• /
• v.4 no.5
• /
• pp.441-445
• /
• 2020

A novel design for a Fresnel lens for a solar end-pumped laser is demonstrated in this paper. The new hybrid Fresnel lens includes two parts, inner and outer. The inner part is a twice-total-internal-reflection and vertical-transmission lens. The outer part is a once-total-reflection and vertical-transmission lens. The radius of the Fresnel lens is 600 mm, and its focal length is 750 mm. The concentrating performance of the Fresnel lens is examined using TracePro. The results show that the concentration efficiency has been greatly improved. The total concentration efficiency of the hybrid Fresnel lens reaches 73.2% when the radius of the laser rod is 3 mm. This design can simplify the concentration system of a solar end-pumped solid-state laser.

• Steel and Composite Structures
• /
• v.27 no.1
• /
• pp.13-25
• /
• 2018

The main objective of this study is to develop a dual approach for geometrically nonlinear finite element analysis of plane truss structures. The geometric nonlinearity is considered using the Total Lagrangian formulation. The nonlinear solution is obtained by introducing and minimizing an objective function subjected to displacement-type constraints. The proposed method can fully trace the whole equilibrium path of geometrically nonlinear plane truss structures not only before the limit point but also after it. No stiffness matrix is used in the main approach and the solution is acquired only based on the direct classical stress-strain formulations. As a result, produced errors caused by linearization and approximation of the main equilibrium equation will be eliminated. The suggested algorithm can predict both pre- and post-buckling behavior of the steel plane truss structures as well as any arbitrary point of equilibrium path. In addition, an equilibrium path with multiple limit points and snap-back phenomenon can be followed in this approach. To demonstrate the accuracy, efficiency and robustness of the proposed procedure, numerical results of the suggested approach are compared with theoretical solution, modified arc-length method, and those of reported in the literature.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.26-37
• /
• 2006

This study addresses the applicability of box fractal dimension, $D_B$, as an index of statistical homogeneity of fractured rock mass. The box-count method's capability in quantifying the combined effect of fracture density and size distribution is examined systematically. Total of 129 two-dimensional fracture configurations were generated based on different combinations of fracture size distribution and fracture density. $D_B$was calculated for the generated fracture network systems using the box-counting method. It was found that was standard deviation of trace length and fracture orientation have no effect on calculated $D_B$. The estimated $D_B$ was found to increase with increasing total density and/or mean trace length. To explore the field applicability of this study, the statistical homogeneity of fractured rock mass was investigated at the rock slope and the underground facility using the box-counting method as well as conventional contingency table analysis. The results obtained in this study clearly show that the methodologies given in this paper have the capability of determining the statistical homogeneity of fractured rock mass.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.156-163
• /
• 2009

Our objective is to increase the flowability of Polypropylene(PP) compounds and achieve flow mark free surface in injection molded specimen. We have investigated flowabilities of PP compounds which were composed of PP, rubber, talc, and trace amount of additives. Flowability measurement was performed with four types PPs of which molecular weight distributions(MWD) and melt indexes(MI) were different. Rheological properties of the PP compounding materials, such as spiral flow(SF) length, MI, and shear viscosity, were evaluated. When PP with the broad MWD was used, there were remarkable cases where the spiral flow length of low MI PP compound was longer than that of higher MI PP compound. The PP compound having low MI but broad MWD PP has more flowability than the compound with only high MI.

• 한국해양학회지
• /
• v.7 no.1
• /
• pp.24-45
• /
• 1972

The Han River is an important water source in Seoul and neighbouring districts, for public and industrial supply, and for agriculture and fishery. Nowadays, more than six million inhabitants are supplied withe water from this river. The total length of the river is 470km, and has 17 10$\^$9/㎥ an average annual flow. The hydrographic characteristics at Seoul are 653㎥/sec in an average flow, 4,608㎥/sec in the maximum average flow, and 201㎥/sec in the minimum average flow. These are influenced in some degree by snowmelt in early spring, and greatly by the flood during summer. For the pollution problems, the periods of low flow are critical ones. As a rule they occur around the months November through June. Nowadays, most of the sewage from towns and industries is discharged untreated. Apart from domestic and industrial sewages, there are some discharges of mineral matter by mines in the upriver region. In general, water quality of the Han River is kept very clean and healthy until Kwangnaru of the upper region of Seoul. A large pollution, however, is received in the downstream by the domestic and industrial sewages of Seoul. It can be seen that dissolved oxygen, COD and BOD$\sub$5/ diminish markedly, and the intensity of almost every water parameter of the river continues to increase. Comparison of the figures for 1971 derived from a sampling point 40km downstream of Kwangnaru leads to the conclusion that hardness, Ca and Mg were no changed; alkalinity, Si and soluble- Fe were slightly increased; CO$\sub$2/, acidity, Cl, NO$\sub$2/-N, Cu, Zn and Al were increased in 2 and 3 times; total residue, total ignitious residue, COD, BOD$\sub$5/, NH$\sub$4/-N, PO$\sub$4/-P, Mn, Pb and total-Fe were increased in 4 to 7 times; and SO$\sub$4/, particulate-Fe and Cd were increased in 10 to 11 times. On the other hand, coliforms were increased in 650 times; fecal coliforms in 365 times; enterococci and total plate counts in 30 times, respectively. In view points of water quality standards, the down Han River water is now leveling out in Cd, coliforms and fecal coliforms for the agricultural use; in dissolved oxygen and some trace elements (Cu, Zn, Pb and Cd) for the fishery use; in ammonia, COD, BOD$\sub$5/, and Cd for the drinking use.