• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.14-19
• /
• 2017

Fuel oil consumption cost varies depending on every ship operation and this roughly amounts to 70 % of shipping companies' total revenue. As such, efforts towards improved fuel economy are being pursued. An annual 1 % reduction in fuel consumption is perceived to result in saving tens million US dollars on the global fleet operation. One approach is the application of power take-off configurations which are seen to increase fuel oil economy and are suitable for power generation. In this study, the dynamic properties of a shaft generator coupled on a 10S90ME main engine of an 18 600 TEU container vessel is presented. The vibratory torque and angular velocity variation was examined through theoretical analysis and actual vibration measurement. The result of the study suggests a review on existing classification rules for generator design and the lowering of vibratory torque and angular velocity variation guideline.

• 한국항해학회지
• /
• 제22권4호
• /
• pp.1-14
• /
• 1998

There are three basic modes of operation of ships: liner, tramp and industrial operations. Industrial operations, where the owner of the cargo, i.e. the industrial carrier controls the ships, abound in the shipment of bulk commodities, such as oil, chemicals and ores. Industrial carriers strive to minimize the shipping cost of their cargoes. This paper is concerned with the operational optimization problem of a fleet owned by major international oil company. The major oil company is a holding corporation for a group of oil producing, transporting, refining, and marketing companies located in various countries throughout the world. The operational optimization problem of the fleet is divided into two-phases. The front end corresponds to the optimization of transporting crude oil, product mix, and the distribution of product oil to meet market demand. The back end tackles the operational optimization problem of the fleet to meet the transportation demand derived from the front end. A case study is carried out with the H major oil company problem composed by reflecting the practices of an international major oil company. The results are summarized and examined in the point of optimization for the total operation of the H major oil company and the operational optimization problem of the fleet. The paper concludes with the remark that the results of the study might be useful and applicable in practices of these related decision problems.

• 산업경영시스템학회지
• /
• 제45권4호
• /
• pp.240-246
• /
• 2022

This paper introduces a container loading problem and proposes a theoretical approach that efficiently solves it. The problem is to determine a proper weight of products loaded on a container that is delivered by third party logistics (3PL) providers. When the company pre-loads products into a container, typically one or two days in advance of its delivery date, various truck weights of 3PL providers and unpredictability of the randomness make it difficult for the company to meet the total weight regulation. Such a randomness is mainly due to physical difference of trucks, fuel level, and personalized equipment/belongings, etc. This paper provides a theoretical methodology that uses historical shipping data to deal with the randomness. The problem is formulated as a stochastic optimization where the truck randomness is reflected by a theoretical distribution. The data analytics solution of the problem is derived, which can be easily applied in practice. Experiments using practical data reveal that the suggested approach results in a significant cost reduction, compared to a simple average heuristic method. This study provides new aspects of the container loading problem and the efficient solving approach, which can be widely applied in diverse industries using 3PL providers.

• 마케팅과학연구
• /
• 제20권2호
• /
• pp.173-178
• /
• 2010

这是一家私人, 第三代家族拥有的公司, Boom Technologies 公司(BTI). 对电力设施提供产品和服务的供应商, 通信和承包商的市场,不断进步的出口. 尽管在2008年出口销售只占总收入的5%, BTI已形成了一个完整的出口部门. 他们的出口部门的执行董事揭示了一家私营公司的试验和错误以及他们对成功的海外市场的疑问. 自成立以来, BTI始终相信它最大的资产是它的雇员. 当出口销售因为缺乏战略和方向而挣扎时, BTI为其出口部门雇了一位董事总经理. 在BTI总裁和总经理的领导下, 他们很好的利用了这个部门的技能和知识. 为向海外扩展他们的市场份额, 增加出口销售他们进行了机构调整. 结果就是, 出口销售增加了4倍, 国家的地区经理增加了, 同时成功养成了分销渠道网络. 有时, 由于公司的结构, 收入形成很难决定. 因此, 在1996年, 出口部门重组为有限责任公司. 这使得公司改进收入和费用. 最初, 80%的BTI出口销售来自两个国家;因此,最初在海外出售的方法并没有达到预期目标. 然而, 所做的修改, 使得现在公司 经营, 销售超过80个国家. 总经理指出主要有三个出口扩张挑战 1. 产品和船运—BTI主要障碍是产品装配. 最初, 大多数的产品被聚集在美国, 这增加了运输包装费用. 有这么多的部分指定订购, 很多次定的东西到的时候有些零部件都丢失了. 失踪的零件价值上万美元. 装运这些失踪的部分也花费成千上万的美元, 外加一个延迟交货时间六到八周, 所有的费用都由BTI出. 2. 产品适应—在BTI80个出口国家中, 每个国家的安全, 产品标准都不同. 重量, 特殊证, 产品的规格要求, 测量系统的稳定性, 卡车都会因国别而不同. 作为一种准入障碍,以致很难使产品适应. 技术和安全标准的障碍, 作为一种保护国内产业的方法, 可以阻碍成功的进入外国市场 3. 市场的挑战—分销的重要性给BTI带来了很多挑战,因为他们试图根据他们的分销系统来确定每个国家如何操作. 有些国家已经从一个小的竞争对手, 只生产一种具有竞争力的产品而极具竞争力. 而BTI制造超过100种的产品. 营销资料是另一个BTI所关心的, 因为他们试图对经销商推动销售成本. 从翻译和文化差异的角度, 合适的市场营销资料可能会花费很多. 此外, 美国的纸张大小不同于别的一些国家, 当试图复制相同的布局和设计时, 就会出现许多问题. 分销已经成为BTI所面临的挑战之一, 公司宣称他们的分销网络是他们的竞争优势之一, 因为他们的分销商的位置和名字都是保密的. 另外, BTI每年有两次奉献: 培训分销商一年, 另一个是分销商会议. 产品, 航运, 产品适应性, 营销这些挑战,这些海外市场错综复杂需要时间和耐心. 另一个竞争优势是BTI的摇篮到坟墓的策略, 他们遵循产品销售到它的最终安息地, 无论卡车是出租或购买新的或用过的. 他们对该公司购买或租赁之前的产品都提供服务和设备维护计划和一份详细的费用分析. 扩大海外总是会面临挑战. 如总经理说, "如果你没有耐心(出口业务), 你最好做别的事." 知道如何快速适应提供必要的技能, 适应每个国家的不同需求, 以及独特的挑战, 使他们能够保持竞争力.

• 한국항해항만학회지
• /
• 제43권4호
• /
• pp.264-272
• /
• 2019

본 연구에서 기업가치의 대용변수로 활용된 투하자산수익률과 재무구조(부채비율)은 정(+)의 관련성을 보이고 있다. 이는 재무적 곤경에 처하기 이전에는 자기자본비용보다 절세효과가 있는 부채의 자본비용이 저렴하기 때문에 기업가치와 재무구조는 정(+)의 관련이 있다는 정태적 절충이론과 부합되는 결과이다. 또한, 영업수익성(EBITDA/매출), 투자안전성, 총자산 성장률, 순운전자본 그리고 감가상각비는 재무구조(부채비율)와 부(-)의 관련성을 띠고 있다. 이는 성장률이 낮을수록 부채비율이 높다는 Jensen의 부채의 통제가설과 수익성과 현금흐름이 높은 기업은 내부자금조달이 원활하므로 부채비율이 낮다는 자금순위이론에 부합되는 연구결과이다. 연료비, 차입금, 총자산회전율, 금융비용, 용선료, 유형자산율은 부채비율과 유의적인 정(+)의 관련성을 띠고 있다. 이는 대리이론과 부합되는 결과이며 파산한 H선사처럼 과도한 용선료가 우리나라 외항선사의 재무구조를 압박하는 요인으로 확인하였다.

• 한국항만경제학회지
• /
• 제37권4호
• /
• pp.13-31
• /
• 2021

2011년 한-유럽 FTA 체결 이후 두 지역의 거래액은 증가일로에 있으며 전체 시장은 지속적으로 확대되고 있다. 여러 운송수단을 이용하는 복합국제운송에 대한 관심이 늘어나며 기존의 해운운송 위주의 운송 방식에서 철도를 포함한 두 가지 이상의 운송수단을 사용하는 다중운송경로를 통한 운송이 확대되고 있다. COVID-19의 영향으로 2019년 세계 화물 시장이 타격을 받았는데 특히 해상 및 항공 노선의 급격한 제한에 기인하고 한국의 대유럽 수출도 감소하였다. 이러한 영향에도 2020년 CRE(China Railway Express) 화물 열차의 총 수는 2016년 대비 7.3배 증가한 12,406개 노선으로 전년 대비 50% 증가하였다. 철도를 이용한 육상기반의 화물운송에 대한 연구는 꾸준히 있어 왔으나 한국과 유럽의 운송노선에 대한 연구는 TSR(Trans Siberian Railway), 수에즈 해운(Suez Shipping), 기존 TCR(Trans China Railway) 노선에 국한되었다. 본 논문은 중국에서의 일대일로 구상에 따라 최근 변화를 겪고있는 실크로드의 핵심에 초점을 맞추어 중국-유럽 화물열차(CRE)를 대상으로 연구를 진행하였다. Fuzzy-AHP는 한국에서 유럽으로 가는 국제 복합항로 선정 시 요인의 우선순위를 결정하는데 사용하였으며 중국과 한국의 전문가 설문조사를 통해 결과를 도출하였다. 요인 선정 후 TOPSIS 방법을 적용하여 계획된 3개의 경로를 순위화하였다. 그 결과 총비용, 총시간, 서비스 신뢰도가 CRE 기반 복합운송을 선택할 때 의사결정자가 고려하는 요소로 나타났다. 또한, 주요 3개 복합운송노선에서 Route 1(인천-대련-만주-함부르크) 노선이 최적 노선이고 Route 2(인천-리차오-얼롄하오터-함부르크)와 Route 3(인천-롄윈강-시안-함부르크) 순서로 나타났다.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.582-589
• /
• 2010

As a part of the back-end fuel cycle, transportation of spent nuclear fuel (SNF) from nuclear power plants (NPPs) to a fuel storage facility is very important in establishing a nuclear fuel cycle. In Korea, the accumulated amount of SNF in the NPP pools is troublesome since the temporary storage facilities at these NPP pools are expected to be full of SNF within ten years. Therefore, Korea cannot help but plan for the construction of an interim storage facility to solve this problem in the near future. Especially, a decision on several factors, such as where the interim storage facility should be located, how many casks a transport ship can carry at a time and how many casks are initially required, affect the configuration of the transportation system. In order to analyze the various possible candidate scenarios, we assumed four cases for the interim storage facility location, three cases for the load capacity that a transport ship can carry and two cases for the total amount of casks used for transportation. First, this study considered the currently accumulated amount of SNF in Korea, and the amount of SNF generated from NPPs until all NPPs are shut down. Then, how much SNF per year must be transported from the NPPs to an interim storage facility was calculated during an assumed transportation period. Second, 24 candidate transportation scenarios were constructed by a combination of the decision factors. To construct viable yearly transportation schedules for the selected 24 scenarios, we created a spreadsheet program named TranScenario, which was developed by using MS EXCEL. TranScenario can help schedulers input shipping routes and allocate transportation casks. Also, TranScenario provides information on the cask distribution in the NPPs and in the interim storage facility automatically, by displaying it in real time according to the shipping routes, cask types and cask numbers that the user generates. Once a yearly transportation schedule is established, TranScenario provides some statistical information, such as the voyage time, the availability of the interim storage facility, the number of transported casks sent from the NPPs, and the number of transported casks received at the interim storage facility. By using this information, users can verify and validate a yearly transportation schedule. In this way, the 24 candidate scenarios could be constructed easily. Finally, these 24 scenarios were compared in terms of their operation cost.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 춘계학술대회논문집
• /
• pp.21-30
• /
• 2002

Busan Port which is the representative social overhead capital facilities for international trade of goods has been the driving force for economic development in Korea. Therefore, the central government should play the major role in building a rear road to Busan Port in order that it may function as a mojor port of Northeastern Asia through the systemization of mutual assistance among connected facilities, completely equipped with port-related facilities befitting to the principal port of imports and exports. In this study, the validity of container tax is being examined, analyzing container tax which Is considered as an obstacle to the development of Busan Port and its purpose, and grasping the present conditions by the realistic speculation on container tax issues and its abolition. First, the port rear road as a social overhead capital facilities, which connects port and expressway, should be considered as part of port, and port is social overhead capital invested by government. Second, the susan City imposes on container tax. As a result, a shipper and a shipping company are paying a double charge by paying container tax with port dues. Third, someone argues that port rear road is constructed as container truck generates much traffic, but it is unreasonable to conclude that container truck is seed of traffic jam because according to traffic survey of Busan City, container truck occupies only 1.45% of total traffic Forth, it has bad influence upon the competitiveness of Busan Port as Northeastern logistics base, as other ports who are competing with Busan Port like Singapore. Hong kong, Kobe make their competitiveness strong by decreasing the cost of pore dues

• 수산해양교육연구
• /
• 제28권5호
• /
• pp.1319-1328
• /
• 2016

Since Ballast Water Management Convention has been effected, BWTS, applied to new-building vessels and existing vessels, have been developed from many countries with various treatment methods. However, BWTS is mainly typed Electrolysis, Ozone and UV type. Approximately 70 products have been type approved by the Flag Administrations. For the new-building vessels, the vessels' design and construction have been considered for arrangements and installations for BWTS. However, existing vessels which already construction had finished have problem with selection of BWTS type for installation and arrangement. The selection of the most economized BWTS system is important though, CAPEX has not been made any significant differences. However, OPEX is more important factor. Consequently, detail analysis of OPEX is the key to the selection of the most economized BWTS system and also it can be the purpose of this study. The feasibility study on the main three type of BWTS (Electrolysis, Ozone and UV type) for 175K Bulk Carrier and 57K Cargo ship has been conducted for this study. Because, these three type of BWTS have been the most frequently installed and used and the two type of object vessels are consist of the 40% of the world merchant ship market. For this study, interest rate, project duration (operation time after installation), maintenance cost and fuel oil price are considered as major factor of feasibility study. In addition, expecting Interest rates to sensitivity analysis conducted for more accurate feasibility study. For 175K Bulk carrier, ozone treatment system is more economical than other types. For 57K cargo ship, UV type is considered more economical than other types. However, it is concluded that electrolysis type is more suitable compare to installation space, total weight and electrical power consumption.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.232-239
• /
• 2001

동북아 지역의 중추 공항 기능을 담당할 인천국제공항의 접근 교통 수단인 영종대교는 총 연장 $4,420{\cal}m$의 연육교로서 주경간부는 10,000ton급 이상의 선박운항이 가능한 세계 최초의 도로 및 철도 병용 복층 자정식 현수교와 접속 구간은 주경간부와의 연속성을 고려하여 복층 Truss교와 강상형교로 구성되어 있다. (주)한진중공업에서는 $2,250{\cal}m$의 복층 Truss 형식 중 해상구간 $1,375{\cal}m$(60,000tons)를 가설하였으며, 본 교량은 상로 6차선 도로, 하로 4차선 도로 및 철도복선으로 구성된 대규모 강교이다. 당초 가설공법은 교각사이에 Temporary Bent를 시공하여 교량을 $75{\cal}m$ 단위의 중블럭으로 제작하여 Floating Crane을 이용하여 가설하는 공법으로 계획되었다. 그러나 본 공법은 10개소 이상의 해상 가벤트를 설치하여 공사를 수행해야 하므로 공사기간이 길어지고 과다한 공사비 소요가 예상되며 해상공사 특성상 고품질 확보가 불확실하였다. 그러므로 당사에서는 $120{\cal}m$ 대블럭 Truss 교량을 일괄 육상/해상운송 및 육상과 동일한 조건에서 설치할 수 있는 공법을 개발함으로써 공사기간을 단축하고 현장 이음개소를 줄여 고품질을 확보함과 아울러 경제적인 공사수행이 가능했다. 본고에서는 영종대교 가설공사 수행을 위해 개발 적용한 운송 및 설치공법에 관한 기술자료를 소개함으로서 국내 교량가설 기술발전에 일조 하고자 한다.