• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.845-848
• /
• 2006

This study sought to investigate the characteristics of cellular concrete, such as porosity, strength and density, according to the cell addition rate. Based on the result, it examined the application to a cellular concrete panel. Porosity was found to increase according to the cell addition rate, measuring continuous porosity of 42% and 47%, and total porosity of 61% and 66%. In terms of cell addition rate, measurements were 7% and 11% respectively. Compressive strength represented 5.0MPa, 3.8MPa and 2.8 MPa in terms of 7%, 9% and 11% respectively, decreasing 1 MPa of strength according to every 2% increase of cell addition rate. Density showed 0.55, 0.44 and 0.36 in terms of 7%, 9% and 11% respectively, decreasing 1.0 MPa according to every 2% increase of cell addition rate proportionally. In addition the sandwich panel of cellular concrete which was fabricated during this research was found to be relatively heavy and non-flammable with an excellent strength of 4.0 MPa. Compared with a light concrete panel, considering the compressive strength that accountsfor 10 MPa, it appeared relatively low in strength. However it would be excellent for application due to the light density of only 0.4 MPa.

• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.547-555
• /
• 1996

Porous alumina ceramics were fabricated by pseudo-boehmite phydosol-gel process within/without commercial $\alpha$-alumina particles average 1 and 40 micron respectively. The pore characteristics of fired specimens were studied by the measurement of bulk density total porosity thyermal analysis pore volume pore distribution BET area XRD and SEM. with increasing of firing temperature pore volume and BET surface area were decreased and the average pore size was increased to approximately 146$\AA$ upto 80$0^{\circ}C$ by de-watering of [OH] and formation of $\alpha$-alumina. The fired relative density of the alumina-dispersed specimen with average 1 micron particle was increased with the amounts of dispersed particle by bimodal packing theory which is compared to the ones of specimen including of average 40 micron particle. It was confirmed that the percola-tion threshold in porous ceramics with coarser particle (40 micron) has formed between the transformed-alumina from hydrogel and dispersed-alumina of above 50 vol% particle and the total porosity was increased at the threshold point above.

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.368-373
• /
• 2015

Porous alumina ceramics with two different pore sizes were fabricated using hollow microspheres as the pore-forming agent. The relative density, total porosity, and microstructure of the obtained alumina ceramics were studied. It was found that the total porosity of sintered samples with different amounts of hollow microsphere content, from 2.0 to 4.0 wt%, was 69.3-75.6%. The interconnected and spherical cell morphology was obtained with 3.0 wt% hollow microsphere content. The resulting ceramics consist of a hierarchical structure with large-sized cells, and small-sized pores in the cell walls. Moreover, the compressive strength of the sintered samples varied from 8.3-11.5 MPa, corresponding to hollow microsphere contents of 2.0-4.0 wt%.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.311-316
• /
• 2003

Effects of pores on the microwave properties in microwave dielectric ceramics were studied by a computer simulation. Scattering matrix S$\_$21/ obtained from the network analyzer was compared to the S$\_$21/ obtained from the simulation. From electric field distribution, the dominant resonant TE$\_$01$\delta$/ mode could be easily determined. The effects of the porosity and pore size inside the dielectrics on the microwave properties were investigated by the HFSS simulation. When the total pore volume remains constantly, the quality factor decreased as the pore size Increases. As the total pore volume of the dielectrics increased. quality factor decreased.

• 한국토양환경학회지
• /
• 제3권2호
• /
• pp.61-70
• /
• 1998

본 연구는 충남 금산군에 위치한 산화적지에서 산화후 개벌지역과 비개벌지역을 대상으로 산림식생의 존재여부가 산림토양의 이화학적 성질 변화로 인한 수저유능력에 미치는 영향을 파악하기 위해 가비중, 공극율(조공극 및 세공극), 투수성, 통기성 및 유기물 함량을 비교 분석하였다. 주요 측정인자들에 의해 얻어진 결과는 다음과 같다. 산화지역의 비개벌지 및 개벌지에서 토양 통기성과 투수성을 측정한 결과 비개벌지가 개벌지 보다 양호하였으며, 특히 산정보다는 산록부근에서 가장 큰 차이를 보였다. 또한 산화 뒤 2년이 경과된 후 가장 큰 변화가 나타난 부분은 표토 5∼15cm층이었다. 토양공극 분포는 비개벌지가 개벌지 보다 전공극, 조공극, 세공극이 높게 나타났으며, 토심이 증가함에 따라 전공극량과 조공극량은 감소하였다. 토양가비중은 비개벌지가 개벌지 보다 낮게 나타났으며, 토심이 증가할수록 높게 나타났다. 또한 산록>산복>산정 순으로 통기성, 투수성, 전공극 등이 동일하게 나타났다. 유기물함량은 비개벌지가 개벌지 보다 높았으며 토심이 증가할수록 감소하였다. 토심의 증가에 따라 토양가비중은 정의 상관관계를 나타냈고, 전공극량, 조공극, 통기성, 투수성 및 유기물함량은 부의 상관관계를 나타내었다. 산화적지에서 개벌에 따른 산림환경 변화는 토양의 물리성 및 화학성을 악화시키는 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제16권6호
• /
• pp.875-881
• /
• 2004

The quality of recycled aggregate is affected by original concrete strength and the manufacturing process of recycled aggregates. In this study, the porosity of old and new mortar, and the compressive strength of concrete were investigated to examine the influence of recycled aggregate on the concrete. Six kinds of recycled coarse aggregates were produced from concrete blocks of differing strength levels (A:60. 1MPa, B:41.7MPa, C:25.5MPa). Original concrete strength and the bond mortar of recycled aggregate influences the pore structures of both old and new mortar. The pore size distribution of old mortar was found to be greatly affected by age, and the reduction of the porosity of bond mortar on low strength recycled aggregate increased at a greater rate than that of bond mortar on high strength recycled aggregate. The pore size distribution of new mortar in recycled aggregate concrete changed in comparison with that of new mortar in virgin aggregate concrete. The total porosity of new mortar using B level recycled aggregates was smaller than that of new mortar with A, and C level recycled aggregates. Moreover, the compressive strength of recycled aggregate concrete was found to have been affected by original concrete strength. The compressive strength of concrete only changed slightly in the porosity of new mortar over $15\%$, but increased rapidly in the porosity of new mortar fewer than $15\%$.

• 지구물리와물리탐사
• /
• 제17권3호
• /
• pp.121-128
• /
• 2014

투과도는 다공질 암석 내에서 유체의 유동 특성을 나타내는 중요한 매개변수로서 일반적으로 코어 시료의 유체 유동실험을 통해 산출된다. 하지만, 유체 유동실험을 위해서는 별도의 실험장치가 필요하며, 투과도가 낮을 경우 많은 시간이 소요될 수 있다. 본 연구에서는 일련의 투과도 측정 실험 없이 시료의 건조과정만으로 투과도를 도출하기 위해 유체투과도, 공극률, 건조율간의 상관관게를 분석하였다. 공극률은 표면건조 포화시료를 건조시키면서 무게 변화를 연속적으로 측정하는 건조 모니터링 방법을 이용하여 산출하였으며, 건조율은 물 포화율에 따른 시료의 무게 변화율로부터 구했다. 70 ~ 670 mD의 투과도를 보이는 6개의 베레아 사암을 이용해 회귀분석한 결과 공극률 및 건조율로부터 다공성 사암의 투과도를 예측할 수 있는 새로운 경험식을 도출하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.75-83
• /
• 2012

콘크리트내의 공극률은 콘크리트 구조물의 내구적인 특성과 밀접한 관련성이 있다. 특히, 콘크리트 시공시 가수된 물은 콘크리트의 비빔과 작업성에 일시적으로 도움이 되지만, 이러한 가수는 콘크리트의 공극을 증가하게 하며, 이는 콘크리트 구조물의 내구적인 성능저하를 야기하게 된다. 본 연구에서는 물시멘트비 0.45의 시멘트 모르타르에 대하여, 단위수량을 증가시켜 물멘트비를 0.45에서 0.60으로 증가시키면서 내구성능을 평가하였다. 즉, 각 물시멘트별로 소정의 재령까지 양생한 시험체에 대하여 강도, 염화물 확산, 투기성, 포화도 및 수분 확산계수 등의 다양한 내구성 실험을 수행하였으며, 이러한 실험결과들은 변화하는 공극률과 함께 분석되었다. 또한 내구성능의 변화 비율 및 그 패턴은 공극분포, 공극률, 그리고 단위수량을 고려하여 정량적으로 평가되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권1호
• /
• pp.8-20
• /
• 2019

This study was conducted to analyze the pore structure of Yellow poplar. Cross-sectional surfaces of heartwood and sapwood of Yellow poplar (Liriodendron tulipifera) were observed by SEM, and the true density of the heartwood, intermediate wood and sapwood were measured by gas pycnometery, while gas permeability and pore size of heartwood, intermediate wood and sapwood were measured by capillary flow porometery. The pores were classified as through pore, blind pore and closed pore. It was determined that the permeability was increased due to the content and size of through pore being increased although the total porosity of specimen showed slight difference from pith to bark. The content of through pore porosity was 33.754 % of heartwood and 47.810 % of sapwood, showed an increasing trend from pith to bark, however, those for the blind pore porosity and closed pore porosity were 27.890 % and 19.492 % for heartwood and 19.447 % and 4.660 % for sapwood, showed a decreasing trend from pith to bark. The max pore size of specimens was increased by about 5 times from $5.927{\mu}m$ to $31.334{\mu}m$, and mean flow pore size was increased by about 315 times from $0.397{\mu}m$ to $12.437{\mu}m$ from pith to bark.

• Journal of the Korean Wood Science and Technology
• /
• 제45권2호
• /
• pp.232-242
• /
• 2017

The objective of this study was to examine changes in the porosity and internal structure of wood as it goes through the process of saccharification (extraction of fermentable sugars). This study also examined the use of different drying methods to prepare samples for characterization of internal pores, with particular emphasis on the partially disrupted cell wall. Aspen wood flour samples after dilute acid pretreatment followed by enzymatic hydrolysis were examined for nitrogen adsorption. The resulting isotherms were analyzed for surface area, pore size distribution, and total pore volume. Results showed that freeze drying (with sample pre-freezing) maintains the cell wall structure, allowing for examination of saccharification effects. Acid pretreatment (hemicellulose removal) doubled the surface area and tripled the total volume of pores, which were mostly 10-20 nm wide. Subsequent enzymatic hydrolysis (cellulose removal) caused a 5-fold increase in the surface area and a ~ 11-fold increase in the total volume of pores, which ranged from 5 to 100 nm in width. These results indicate that nitrogen adsorption analysis is a feasible technique to examine the internal pore structure of lignocellulosic residues after saccharification. The information on the pore structure will be useful when considering value-adding options for utilizing the solid waste for biofuel production.