• 제목/요약/키워드: Total effective temperature

검색결과 526건 처리시간 0.031초

정제방법에 따른 저온추출 죽력의 특성비교 (Property Comparison of Purified Bambusae Caulis in Liqamen extracted at low temperature)

  • 오영준;김해진;황병길;김선민;장경선;김재창
    • 동의생리병리학회지
    • /
    • 제16권3호
    • /
    • pp.532-536
    • /
    • 2002
  • Jookrhyuk (Bambusae Caulis in Liqamen) was extracted at low temperature (100℃ - 160℃) and purified by adsorption and distillation and their physicochemical properties were compared. In case of colour among all Jookrhyuk samples the L value appeared to be higher in the purified Jookrhyuk,and the b value appeared to be higher in crude Jookrhyuk. Purified Jookrhyuk showed much lower level of total sugar and tar contents than crude Jookrhyuk. A considerable reduction in concentration of methanol and phenolic compounds was achieved by purification process, whereas the content of acetic acid was increased. Therefore it was suggested that adsoption and distillation could be used as one of effective purification methods of various Joockrhyuk samples.

DME HCCI 운전조건에서 Methanol 분율에 따른 HCCI엔진연소 특성에 관한 수치해석적 연구 (A Computational Study on DME HCCI Combustions Characteristics with Methanol Concentrations)

  • 이효원;임옥택;박규열;조원준;백영순
    • 한국수소및신에너지학회논문집
    • /
    • 제25권1호
    • /
    • pp.79-86
    • /
    • 2014
  • In Dimethyl Ether (DME) indirect production processes, DME have a reforming process to separate Methanol. DME has a high cetane number and Methanol has a high octane number. Each fuel has a different combustion characteristics and reactivity. So, this paper was investigated on the combustion characterisitics of DME and Methanol. Basically, Methanol has a effect of retarding ignition. However, Within 10% of total carbon mole number in DME, Methanol slightly changed the onset timing of Low Temperature Reaction (LTR) with increasing thermal-ignition preparation range. It means that controlling combustion phasing of DME can be possible without eliminated LTR. In case of IMEP, the ranges.

고전압 펄스신호 측정용 분압기의 온도보상에 관한 실험 (Experimental Analysis on Temperature Compensation of Capacitive Voltage Divider for a Pulsed High Voltage Measurement)

  • 장성덕;손윤규;권세진;오종석;조무현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
    • /
    • pp.1530-1533
    • /
    • 2005
  • Total 12 units of high power klystron-modulator systems as microwave source is under operation for 2.5-GeV electron linear accelerator in Pohang Light Source(PLS) linac. RF power and beam power of klystron are precisely measured for the effective control of electron beam. A precise measurement and measurement equipment with good response characteristics are required for this. Input power of klystron is calculated from the applied voltage and the current on its cathode. Tiny measurement error severely effects RF output power value of klystron. Therefore, special care is needed to measure precise beam voltage. Capacitive voltage divider(CVD) unit is intended for the measurement of beam voltage of 400 kV generated from the pulsed klystron-modulator system. Main parameter to determine the standard capacitance in the high arm of CVD is dielectric constant of insulation oil. Therefore CVD should be designed to have a minimum capacitance variation due to voltage, frequency and temperature in the measurement range. This paper will discuss the analysis of capacitive voltage divider for a pulsed high-voltage measurement, and the empirical relations between capacitance and oil temperature variation.

  • PDF

산업체 급식소에서 제공되는 콩국수의 미생물적 품질관리에 관한 연구( I ) (A Study on Microbiological Quality & Safty Control of Cold Sybean Noondles serviced by an Industry Foodservice Establishment)

  • 주선의;김혜영
    • 한국식품조리과학회지
    • /
    • 제4권2호
    • /
    • pp.71-79
    • /
    • 1988
  • This study is written to look into microbiological quality by passage of time and holding methods after making foods, by means of evaluating time, temperature and microbiological quality during various phases in product flow of cold soybean noodles serviced by an industry feeding operation for 500 persons a day, measuring pH & Aw and analyzing factors affecting microbiological growth conditions. The results were as follows: 1. According to phases in product flow of cold soybean noodles, it showed 15.6 hours of mean of needed time, $24.2^{\circ}C$ of room temperature, 5.1~7.6 of pH value & 0.95~0.98 of Aw except dry noodles. These conditions were good for multipling of microbe, and the phases with potential sanitary danger were ingredient, pre-preparation, holding before assembly and service and assembly & service. 2. As for holding methods and passage of time, holding at cold table was more effective than holding at room temperature as time past. 3. As for equipments using for making food, dipper, basket, kitchen board & kitchen towel showed high microbiological value in total aerobic plate counts and kitchen towel and stainless-steel were showed high microbioloical value in coliform counts. 4. E. coli, food poisoning bacteria was detected from barrel filled with soybean soup and also soybean itself.

  • PDF

Application of CE-QUAL-W2 [v3.2] to Andong Reservoir: Part II: Simulations of Chlorophyll a and Total Phosphorus Dynamics

  • Ram, Bhattarai Prasid;Kim, Yoon-Hee;Kim, Bom-Chul;Heo, Woo-Myung
    • 생태와환경
    • /
    • 제41권4호
    • /
    • pp.472-484
    • /
    • 2008
  • The calibrated Andong Reservoir hydro-dynamic module (PART I) of the 2-dimensional hydrodynamic and water quality model, CE-QUAL-W2 [v3.2], was applied to examine the dynamics of total phosphorus, and chlorophyll $\alpha$ concentration within Andong Reservoir. The modeling effort was supported with the data collected in the field for a five year period. In general, the model achieved a good accuracy throughout the calibration period for both chlorophyll ${\alpha}$ and total phosphorus concentration. The greatest deviation in algal concentration occurred on $10^{th}$ October, starting at the layer just beneath the surface layer and extending up to the depth of 35 m. This deviation is principally attributed to the effect of temperature on the algal growth rate. Also, on the same date, the model over-predicts hypolimnion and epilimnion total phosphorus concentration but under-predicts the high concentrated plume in the metalimnion. The large amount of upwelling of finer suspended solid particles, and re-suspension of the sediments laden with phosphorus, are thought to have caused high concentration in the epilimnion and hypolimnion, respectively. Nevertheless, the model well reproduced the seasonal dynamics of both chlorophyll a and total phosphorus concentration. Also, the model tracked the interflow of high phosphorus concentration plume brought by the turbid discharge during the Asian summer monsoon season. Two different hypothetical discharge scenarios (discharge from epilimnetic, and hypolimnetic layers) were analyzed to understand the response of total phosphorus interflow plume on the basis of differential discharge gate location. The simulated results showed that the hypolimnetic discharge gate operation ($103{\sim}113\;m$) was the most effective reservoir structural control method in quickly discharging the total phosphorus plume (decrease of in-reservoir concentration by 219% than present level).

Improvement of wear resistance of Zircaloy-4 by nitrogen implantation

  • Han, Jeon G.;Lee, Jae s. J;Kim, Hyung J.;Keun Song;Park, Byung H.;Guoy Tang;Keun Song
    • 한국진공학회지
    • /
    • 제4권S2호
    • /
    • pp.100-105
    • /
    • 1995
  • Nitrogen implantation process has been applied for improvement of wear resistance of Zircaloy-4 fuel cladding materials. Nitrogen was implanted at 120keV to a total dose range of $1\times 10^{17}$ions/$\textrm{cm}^2$ to $1\times 10^{18}$ions/$\textrm{cm}^2$ at various temperatures between $270^{\circ}C$ and $671^{\circ}C$. The microstructure changes by nitrogen implantation were analyzed by XRD and AES and wear behavior was evaluated by performing ball-on-disc type wear testing at various loads and sliding velocities under unlubricated condition. Nitrogen implantation produced ZrNx nitride above $3\times 10^{17}$ions/$\textrm{cm}^2$ as well as heavy dislocations, which resluted in an increase in microhardness of the implanted surface of up to 1400 $H_k$ from 200 $H_k$ of unimplanted substrate. Hardness was also found to be increased with increasing implantation temperature up to 1760 $H_k$ at $620^{\circ}C$. The wear resistance was greatly improved as total ion dose and implantation temperature increased. The effective enhancement of wear resistance at high dose and temperature is believed to be due to the significant hardening associated with high degree of precipitation of Zr nitrides and generation of prismatic dislocation loops.

  • PDF

Pest Prediction in Rice using IoT and Feed Forward Neural Network

  • Latif, Muhammad Salman;Kazmi, Rafaqat;Khan, Nadia;Majeed, Rizwan;Ikram, Sunnia;Ali-Shahid, Malik Muhammad
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제16권1호
    • /
    • pp.133-152
    • /
    • 2022
  • Rice is a fundamental staple food commodity all around the world. Globally, it is grown over 167 million hectares and occupies almost 1/5th of total cultivated land under cereals. With a total production of 782 million metric tons in 2018. In Pakistan, it is the 2nd largest crop being produced and 3rd largest food commodity after sugarcane and rice. The stem borers a type of pest in rice and other crops, Scirpophaga incertulas or the yellow stem borer is very serious pest and a major cause of yield loss, more than 90% damage is recorded in Pakistan on rice crop. Yellow stem borer population of rice could be stimulated with various environmental factors which includes relative humidity, light, and environmental temperature. Focus of this study is to find the environmental factors changes i.e., temperature, relative humidity and rainfall that can lead to cause outbreaks of yellow stem borers. this study helps to find out the hot spots of insect pest in rice field with a control of farmer's palm. Proposed system uses temperature, relative humidity, and rain sensor along with artificial neural network to predict yellow stem borer attack and generate warning to take necessary precautions. result shows 85.6% accuracy and accuracy gradually increased after repeating several training rounds. This system can be good IoT based solution for pest attack prediction which is cost effective and accurate.

벼물바구미의 생식과 발육에 미치는 온도의 영향 (Effect of Temperature on Reproduction and Development of Rice Water Weevil, Lissorhoptrus oryzophilus (Coleoptera: Curculionidae))

  • 이기열;장영덕;안기수;강호중;박성규
    • 한국응용곤충학회지
    • /
    • 제41권2호
    • /
    • pp.123-128
    • /
    • 2002
  • 벼물바구미의 생식과 발육에 미치는 온도의 영향을 2$0^{\circ}C$에서 3$0^{\circ}C$사이의 온도에서 수행하였다. 20, 25, 3$0^{\circ}C$에서 산란전기간은 5월에 채집한 월동성충보다 3월에 채집한 충에서 길었다. 그러나 같은 온도조건에서 산란기간은 3월에 채집한 월동성충보다 5월에 채집된 충이 길었다. (16.9일, 22.0일).산란기간이 긴 5월 채집충이 산란수도 많은 결과를 가져왔다. 난기간은 15.1일(2$0^{\circ}C$)에서 4.5일(3$0^{\circ}C$)로 온도가 높을수록 짧았고, 그리고 부화율은 27$^{\circ}C$에서(100%) 가장 높았다. 난부터 성충까지의 발육기간은 온도가 높아질수록 짧았다; 2$0^{\circ}C$에서 77.9일, 3$0^{\circ}C$에서 38.3일이었다. 난 발육영점온도(T)와 유효적산온도(K)는 각각 16.3$^{\circ}C$와 62.1일도이었다. 난에서 성충우화까지는 각각 13.9$^{\circ}C$와 577.6일도이었다. 제1세대 성충은 2$0^{\circ}C$에서 산란하지 못하였고, $25^{\circ}C$와 3$0^{\circ}C$에서는 산란하였다. 내적자연증가율(r$_{m}$ )은 온도가 높을수록 증가되었다. 1세대당 순증식율(Ro)은 $25^{\circ}C$에서 가장 높았다(75.3).

수술전과 수술중 피부가온요법 적응이 고관절 전치환술 환자의 수술 주기 고막체온 변화에 미치는 영향 (The Effect of Pre and Intra-Operative Warming Therapy on Tympanic Temperature Changes during Perioperative Phase in Receiving Patients with Total Hip Replacement)

  • 권영숙;김은희
    • 기본간호학회지
    • /
    • 제7권1호
    • /
    • pp.86-96
    • /
    • 2000
  • The purpose of the study was to investigate the effects of Warming Therapy used with patients consistantly before and during surgery to on changes in their body temperatures. The data were collected from patients in a university hospital in Taegu between December 1, 1998 and May 31, 1999. The subjects were selected from patients who were hospitalized for total hip replacement surgery. Thirty participants were assigned to two groups : experimental(Warming Therapy) group and control group. Each group consisted of 15 patients. The research design was a repeated measurement design, using a nonequivalent control group. The Warming Therapy, using a forced-air warming blanket, that is a, 'Bair Hugger' was applied to subjects in the experimental group. The subjects in the group were treated with the 'Bair Hugger' to warm up the whole body for 40 minutes before surgery and upper body and face during the operation. The core temperature was measured using a tympanic thermometer. The body temperature of the patients was measured 13 times every 15 minutes during the surgery. After the operation the body temperature of the patients was measured 4 times every 15 minutes, from the time of arrivial in the recovery room to the time of leaving the recovery room. The SPSS Win 9.0 program was used for data analysis. Specific methods tested were done using ${\chi}^2-test$, t-test, repeated measures ANOVA. The findings of the study are as follows. 1. The first hypothesis, 'The level of tympanic temperature for the experimental group which received Warming Therapy will be higher than that of the control group during the operation', was supported (F=32.16, p=.000). 2. The second hypothesis, 'The level of tympanic temperature for the experimental group which received Warming Therapy will be higher than that of the control group after the operation', was supported.(F=33.36, p=.000) 3. During recovery, shivering was observed one patient in the experimental group and seven patients in the control group. In summary, the findings of the study suggest that the 'Warming Therapy' applied before and during the surgery was a very effective treatment for surgical patients in maintaining the core temperature during surgery

  • PDF

홍고추의 저장온도 및 해동조건에 따른 물리화학적 특성 변화 (Changes of Characteristics in Red Pepper by Various Freezing and Thawing Methods)

  • 이혜은;임채일;도경란
    • 한국식품저장유통학회지
    • /
    • 제14권3호
    • /
    • pp.227-232
    • /
    • 2007
  • 홍고추를 원료형태에 따라 원형, 세절, 분쇄로 제조하여 $-5^{\circ}C,\;-20^{\circ}C$$-40^{\circ}C$ 저장고에 보관하였다. 고추의 표면색도는 저장온도 조건에 따라 저장일수가 증가할수록 약간 감소하는 경향을 보였으며, 비타민 C 함량은 원형 홍고추가 세절고추나 분쇄고추보다 저장기간 동안 완만하게 감소하는 경향을 보였다. 저장온도별로는 $-40^{\circ}C$ 저장군에서 비타민 C 함량이 가장 높게 유지되었으며, $-5^{\circ}C$ 저장군에서 저장 2개월째 50% 이하로 급격히 감소하였다. 유리당 함량은 저장일수가 증가할수록 모든 처리구에서 저장 2개월까지 약간 증가하다가 점차적으로 감소하였으며 $-5^{\circ}C$ 저장온도 처리군에서의 감소변화가 $-20^{\circ}C,\;-40^{\circ}C$ 저장온도 처리군보다 심하게 나타났다. 냉동고추를 실온 해동시 드립로스의 양이 냉장 해동, microwave oven 해동시보다 약 2배 가까이 드립로스양이 발생하였으며, 표면색도는 고온 해동시 갈색화가 심하게 나타났다. 해동조건에 따른 냉동고추의 성분 변화는 냉장 해동과 microwave oven 해동시 가장 적게 나타났으며, 해동 시간을 고려한다면 microwave oven 해동이 가장 실용적인 방법이라고 여겨진다.