• Title/Summary/Keyword: Total effective temperature

Search Result 526, Processing Time 0.028 seconds

Improvement of Single Anaerobic Reactor for Effective Nitrogen Removal (효율적 질소제거를 위한 단일 혐기성반응조의 개선)

  • 한동준;류재근;임연택;임재명
    • Journal of environmental and Sanitary engineering
    • /
    • v.12 no.3
    • /
    • pp.9-17
    • /
    • 1997
  • This research aims to remove nitrogen in the piggery wastewater by combined process with upflow anaerobic sludge blanket (UASB) and biofilm process. For the effective denitrification. anaerobic and anoxic reactors were connected to a reactor. The effluent of aerobix reactor was recycled equally with influent in the upper filter of anaerobic reactor for denitrification and outlet of UBF reactor was connected to the settling tank with $1.5{\;}{\ell}$ capacity and the settling sludge was repeatedly recycled to UASB zone. The organic loading rate of total reactor was operated from 0.4 to $3.1kgCOD/m^{3}/d$ and it was observed that the removal rate of TCOD was 80 to 95 percentage. Ammonia nitrogen was removed over 90 percentage in the less volumetric loading rate than $0.1{\;}kgN/m^{3}/d$. But because of non-limitation of organic materials, it was reduced to 70 percentage in the more volumetric loading rate than $0.6{\;}kgN/m^{3}/d$. But denitrification rate was observed 100 percentage in the all of loading rate. This is caused by the maintenance of optimum temperature, sufficient carbon source, and competition of electron acceptors. The results of COD mass balance at the $1.21{\;}kgCOD/m^{3}/d$ was observed with the 71.7% percentage of influent COD. It was revealed that the most part of organic materials was removed in the aerobic and the anaerobic reactor because 38.4 percentage was conversed into $CH_{4}$ gas and 11 percentage was removed in the aerobic reactor with cell synthesis and metabolism. Besides, 5.7% organics was used to denitrification reaction and 3.7% organics related to sulfate reduction.

  • PDF

The Application of Non-phosphorous AEC Program in Cooling Water Systems of Petrochemical Industry

  • Li, Dagang;Hong, Mike;He, Gaorong
    • Corrosion Science and Technology
    • /
    • v.7 no.1
    • /
    • pp.16-21
    • /
    • 2008
  • A non-phosphorous program employing an alkyl epoxy carboxylate (AEC) has been successfully applied to petrochemical and other large industrial open recirculating cooling water systems. AEC is a patented non-phosphorous calcium carbonate scale inhibitor that has demonstrated better scale inhibition abilities than traditional organic phosphonates. In addition to its antiscalant properties, AEC inhibits carbon steel corrosion when used at high dosages. AEC can be combined with zinc to form a non-phosphorous program with very low levels of phosphate to provide an environmentally acceptable program. In actual applications, the total phosphate developed in the cooling system from cycling the makeup is below 1 ppm as $PO_4$. This level has complied with the highest standards of wastewater discharge limitations. The performance of two AEC/Zinc applications is reviewed. In both cases excellent corrosion and scale control were achieved with AEC/Zinc programs. One case history details the performance with a low hardness water (100 ppm calcium, as $CaCO_3$) operating at 8-10 cycles of concentration. The corrosive nature of the water and the long retention time of the system stressed both the corrosion and scale control capabilities of the program. The second case history demonstrates the performance of the program with a moderate hardness water (400-600 ppm calcium, as $CaCO_3$), but under harsh conditions of high temperature and low flow. The AEC/zinc combination has been found to be highly effective in controlling the corrosion of ferrous metals. AEC can provide good corrosion inhibition at high concentrations, while zinc is known to be an excellent cathodic inhibitor. The combination of the two inhibitors not only provides a synergistic blend that is effective over a wide range of operating conditions, but also is environmentally friendly.

The Clinical Study on 80 Cases of Low Back Pain Patients (요통환자 80례에 대한 임상적 고찰)

  • Jeon, Seong-Ha;Ryu, Heon-Sik;Chang, Byoung-Son;Kim, Su-Hyun;Park, Hoi-Jin
    • Journal of Acupuncture Research
    • /
    • v.24 no.2
    • /
    • pp.155-167
    • /
    • 2007
  • Objectives : This study was performed to evaluate the general distribution and the efficacy of oriental medical treatment for low back pain. Methods: We have selected of the moxa bucket moxibustion. We make a comparative study of the thermodynamic characteristics of moxa bucket moxibustion. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa bucket moxibustion made by oak wood. Results : The 80 cases of low back pain patients was analyzed according to the distribution of sex, age, the period of disease, contributing factor, the patient-condition on admission, the symptom on admission, the duration of admission, the reading of the X-ray and the treatment efficacy was evaluated respectively. 1. Female was more than male in the ratio of 1:1.2, and thirties and seventies 25% the most, the acutest phase 46.3% the most, reason unknown 33.8% the most, Grade III 50% the most, L.B.P. only 51.3% the most, the day of 6-10 30% the most, compression Fx 30% the most. 2. In the total treatment result, the good was 51.3%, the excellent 22.5%, the fair 17.5%, the poor 8.8% in order. About 'the effective rate'(the percentage of positive effective treatment cases) of each distribution, the fifties 100% the most, the acutest phase 97.3% the most, the slip down, weight lifting, overuse 100% the most respectively, Grade III 97.5% the most, L.B.P. only 95.1% the most, the day of 11-15 100% the most, HN.P. 93.3% the most. Conclusions : We have known the efficacy of oriental medical treatment for L.B.P. was good and early treatment was better than late treatment and main cause of L.B.P. was degenerative change.

  • PDF

Improvement of protein extraction efficiency from defatted sesame meal with thermal and enzymatic treatments (열 처리와 효소 처리에 의한 탈지 참깨박 단백질의 추출율 향상)

  • In, Man-Jin
    • Journal of Applied Biological Chemistry
    • /
    • v.63 no.4
    • /
    • pp.291-295
    • /
    • 2020
  • In order to increase the utilization of defatted sesame meal (DSM), a by-product of sesame oil production, the conditions of extraction of insoluble proteins from DSM by enzyme treatment were investigated. As a result of comparing the treatment results of proteolytic enzymes Alcalase, Flavorzyme, Neutrase, and Protamex with control, Protamex was effective in increasing the total solid and protein content. At the reaction conditions of Protamex (50 ℃, pH 6.0), the dosage of enzymes was appropriate for 1% of DSM and 3 h of enzyme reaction time. To improve the efficiency of enzymatic treatment, the protein content extracted increased as the heat treatment temperature increased, and slightly increased above 110 ℃. As a result of investigating the effect of the combination treatment of cell lytic enzyme (Tunicase) and protease (Protamex) on protein solubilization, it was most effective to treat the cell lytic enzyme after processing the protease. After heat treatment (110 ℃, 10 min), sequential treatment of Protamex and Tunicase increased the protein content by about 3.5 times (9.85→35.58 mg/mL) of the non-heated control and 2.2 times (15.83→35.58 mg/mL) of the heat treated control.

Kinetic Study of the Anaerobic Digestion of Swine Manure at Mesophilic Temperature: A Lab Scale Batch Operation

  • Kafle, Gopi Krishna;Kim, Sang-Hun
    • Journal of Biosystems Engineering
    • /
    • v.37 no.4
    • /
    • pp.233-244
    • /
    • 2012
  • Purpose: The kinetic evaluation was performed for swine manure (SM) degradation and biogas generation. Methods: The SM was anaerobically digested using batch digesters at feed to inoculum ratio (F/I) of 1.0 under mesophilic conditions ($36.5^{\circ}C$). The specific gas yield was expressed in terms of gram total chemical oxygen demand (mL/g TCOD added) and gram volatile solids added (mL/g VS added) and their effectiveness was discussed. The biogas and methane production were predicted using first order kinetic model and the modified Gompertz model. The critical hydraulic retention time for biomass washout was determined using Chen and Hashimoto model. Results: The biogas and methane yield from SM was 346 and 274 mL/ TCOD added, respectively after 100 days of digestion. The average methane content in the biogas produced from SM was 79% and $H_2S$ concentration was in the range of 3000-4108 ppm. It took around 32-47 days for 80-90% of biogas recovery and the TCOD removal from SM was calculated to be 85%. When the specific biogas and methane yield from SM (with very high TVFA concentration) was expressed in terms of oven dried volatile solids (VS) basis, the gas yield was found to be over estimated. The difference in the measured and predicted gas yield was in the range of 1.2-1.5% when using first order kinetic model and 0.1% when using modified Gompertz model. The effective time for biogas production ($T_{Ef}$) from SM was calculated to be in the range of 30-45 days and the critical hydraulic retention time ($HRT_{Critical}$) for biomass wash out was found to be 9.5 days. Conclusions: The modified Gompertz model could be better in predicting biogas and methane production from SM. The HRT greater than 10 days is recommended for continuous digesters using SM as feedstock.

The Influence of MnO doped on the Radiation Properties of Far-Infrared in Semiconduction PTC Thermistor. (반도성 PTC 서미스터의 원적외선 방사특성에 미치는 MnO의 영향)

  • Song, M.J.;Cho, H.S.;Jang, S.H.;Park, C.B.;Kim, C.H.;Lee, J.U.
    • Proceedings of the KIEE Conference
    • /
    • 1991.07a
    • /
    • pp.204-208
    • /
    • 1991
  • In this paper, the radiation properties of a far-Infrared using a PTC thermistor, the $BaTiO_3$+1.63mol% $Al_2O_3$+3.75mol% $SiO_2$+1.25mol% $TiO_2$(1/3 $Al_2O_3+xSiO_2$+(1-x) $TiO_2$; total x: 6.67mol%) ceramics, in order to progress the grade resistivity characteristics, by adding an ethanol solution of $Mn(NO_3){\cdot}6H_2O$ was investigated. The ceramics was fabricated by wet-mill method. The sintering temperature read 1300-1350$[^{\circ}C]$ and the holding time was 3 hours. The quantity of $Sb_2O_3$ and $Al_2O_3$ for an activation of the far-infrared radiation in ceramics was doped. In sintering, R-T property was measured by varying the grade temperature. The anatase-lighting apparatus and microstructures by using XRD and SEM were observed. $Sb_2O_3$. oxides additive. affected the semiconducting and emissivity and MnO was devoted an increase of resistivity. The specimen which only $Sb_2O_3$ is added to was high appeared far-infrared emissivity and Mno was not affacted the far-infrared radiation. The ceramics shows that it is effective in the structure of the human bodies as organic bodies and can be applied as electron device.

  • PDF

The Effects of Acupuncture Treatment on the Autonomic Nervous Systems of Hwa-byung Patients' Insomnia (화병환자의 불면증 침치료가 인체의 자율신경계에 미치는 영향)

  • Bae, Dal-Bit;Lyu, So-Jung;Lee, Go-Eun;Lee, Seung-Jae;Kang, Hyung-Won;Lyu, Yeoung-Su
    • Journal of Oriental Neuropsychiatry
    • /
    • v.25 no.3
    • /
    • pp.235-242
    • /
    • 2014
  • Objectives: The purpose of this research is to examine effects of acupuncture treatment on the autonomic nervous systems of Hwa-byung patients with insomnia. Methods: The study was performed through a patient-assessor blind, randomized, placebo-controlled trial in which the volunteers, data collectors, and analysts were unaware of which individuals were receiving the treatment. A total of thirty-seven volunteers were divided into 2 groups. Eighteen subjects were placed into a trial group and 19 subjects into a control group using a randomization table. The trial group was treated with bilateral Shigu, Ahnmyun, B62 (Shinmaek), and K6 (Chohae), while the control group was not given any other treatment. The ISI (Insomnia Severity Scale) was measured as the first evaluative instrument, and then a comparative analysis was conducted by comparing the results with those measured by ANS (BVP/HR, respiration rate, peripheral temperature, skin conductance, EMG). Results: In the BVP/HR, statistically significant decreases were found in those from the trial group compared to those of the control group. Skin conductance was found to be significantly increased in the trial group, as compared to the control group. However, there were no significant differences between the groups with respect to peripheral temperature, respiration rate, and EMG. Conclusions: The results suggest that acupuncture treatment is effective in the treatment of hwa-byung patients who suffer from insomnia due to their autonomic nervous systems.

Solvent Fractionation of Sardine Oil and Utilization of Fractionated Oils (정어리유(油)의 용매분별과 분별유(油)의 이용)

  • Lee, Young-Chul;Kim, Young-Boong;Kim, Kee-Sung
    • Journal of the Korean Applied Science and Technology
    • /
    • v.6 no.2
    • /
    • pp.11-19
    • /
    • 1989
  • In order to fractionate sardine oil by different solvents for an effective use of fish oil being subjected to the limit of use, an attempt was to investigate the proper solvents, ratios and fractionation time. The results of the study were as follows: 1. The proper solvent of fractionation using ethanol, isopropyl alcohol, acetone, and hexane was ethanol, and its optimum ratio was 2:1 (ethanol: oil, v/w). The proper time of ethanol fractionation by the ratio (2:1) was 4hr at $10^{\circ}C$, 6hr at $5^{\circ}C$, 8hr at $0^{\circ}C$and 8hr at $-5^{\circ}C$, respectively. 2. In the fractionation by stages using the ratio (2:1) at each temperature, the yield of stearine was 8% at $10^{\circ}C$ (Fraction I), 32% at $5^{\circ}C$ (Fraction II), 7% at $0^{\circ}C$ (Fraction III) and 10% at $0^{\circ}C$ (Fraction IV), respectively. When ethanol fractionation was undertaken at $5^{\circ}C$ by stages, the yield of stearine (Fraction II) was high. 3. Iodine value of Fraction II was 96.8. This result indicated that the hydrogenation process would be simplified by fractionation. 4. The percentage of the decrease of polyenoic acids from original sardine oil to Fraction II oil was from 30.5% to 13.5%. The major fatty acids of Fraction II were palmitic and oleic acids and these fatty acids were about 52% of total fatty acids. Therefore, Fraction II, which remained liquid oil at room temperature because solid fat content was 6.9% at $20^{\circ}C$, would be used as frying oil.

Isolation and Purification of DHA from Skipjack Orbital Tissue Oil (가다랭이 안와조직으로부터 DHA의 추출 및 정제)

  • JEONG Bo-Young
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.26 no.6
    • /
    • pp.529-537
    • /
    • 1993
  • Several methods were examined for purification of docosahexaenoic acid (DHA, 22:6n-3) from skipjack Euthynnus pelamis orbital tissue oil, a marine by-product, and a modified method for isolation of a high purity DHA was proposed. Skipjack orbital tissue contained $55.4\%$ of total lipid(TL), and DHA accounted for $23.7\%$ of the TL. Application of low-temperature crystallization and urea inclusion compound methods to the orbital fatty acid mixture resulted in increases of DHA concentrations to approximately $46\%\;and\;61\%$, respectively. These methods were suitable for large production of DHA with relative low purity because of the simple purification procedure. DHA of approximately $74\%$ in purity was obtained by silver nitrate aqueous solution method, but the method gave a very low recovery($<10\%$). Silver nitrate-impregnated silica column chromatography was suitable for purification of a high purity DHA(purity, $>98\%$ and recovery, $>90\%$) A modified method, silver nitrate-impregnated silica column chromatography combined with low-temperature crystallization(two step purication method) was proposed as the most effective method to obtain DHA with high purity($99.9\%$) from the skipjack orbital oil.

  • PDF

Effect of Chemically Treated / Untreated Carbon Cloth: Potential Use as Electrode Materials in the Capacitive Deionization Process of Desalination of Aqueous Salt Solution

  • Thamilselvan, Annadurai;Nesaraj, A Samson;Noel, Michael;James, E.J.
    • Journal of Electrochemical Science and Technology
    • /
    • v.6 no.4
    • /
    • pp.139-145
    • /
    • 2015
  • Capacitive deionization (CDI) process is a novel approach for desalination of an aqueous salt solution. In the present study, an activated carbon cloth (ACC) is proposed as effective electrode material. Initially the carbon cloth was activated in 1 M and 8 M HNO3 for 9 hours at room temperature. The untreated and chemically activated carbon cloth (ACC) electrode materials were subjected to BET surface area measurements in order to get information about their specific surface area, average pore size, total pore volume and micropore area. The above materials were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM) also. The electrochemical studies for the electrodes were done using cyclic voltammetry (CV) in 0.1 M Na2SO4 medium. From the studies, it was found that resistivity of the activated carbon cloth electrodes (treated in 1 M and 8 M HNO3) was decreased significantly by the chemical oxidation in nitric acid at room temperature and its capacitance was found to be 90 F/g (1 M HNO3) and 154 F/g (8 M HNO3) respectively in 0.1 M Na2SO4 solution. The capacitive deionization behavior of a single cell CDI with activated carbon cloth electrodes was also studied and reported in this work.