• 한국물환경학회지
• /
• 제36권3호
• /
• pp.245-254
• /
• 2020

Water quality improvement projects are being implemented without predicting the effect of water quality improvement on Lake Sapgyo. As the method of selecting the target stream for the effective conduct of water quality improvement projects the method of rating the streams were studied. To build a stream grading method, 60 major streams in the Lake Sapgyo system were monitored. The selection method of rivers subject to priority management for water quality improvement was applied to the stream grading method using the Analytic Hierarchy Process (AHP). The analysis of importance by site by stream grading method revealed the following: water quality (36.0%), flow (26.1%), travel load (13.4%), TMDL density (12.0%), TMDL (8.9%), and area (3.7%). The pollution level of the river was scored by using the stream grading method, and the ranking of 51 streams was calculated. Based on this, the group was classified into six grades (A-F). Among the groups, the F and E groups were selected as the priority management streams. Cheonan-Cheon (Cheonan City) was selected as the first stream to establish water quality improvement measures in the Lake Sapgyo system, and Seowoo-Cheon (Dangjin City) was selected as the second site, and Oncheon-Cheon (Asan City) was selected as the third site. Each local government is expected to improve the water quality improvement effect with limited resources when establishing and implementing water quality improvement measures for the streams (F group, E group) to be managed in this study.

• 한국수자원학회논문집
• /
• 제39권7호
• /
• pp.627-636
• /
• 2006

본 논문에서는 금강수계 오염총량관리 기본계획에서 제시된 오염부하량 자료를 기반으로 공시된 목표수질을 달성하기 위한 적정방류량을 산정하였다. 오염총량관리의 1단계로 BOD를 대상으로 총량관리가 이루어질 계획이며 향후 질소 및 인 계열로 확대될 전망이다. 총량구역별 및 행정구역별로 산정된 BOD와 TN, TP 부하량을 GIS를 활용하여 10개의 지류수계에 대하여 재분배하였고 지류수계에 해당되지 않는 구역에 대해서는 15개의 소구간으로 처리하여 반영하였다. Qual2E를 사용하여 수질모의를 실시한 결과 2010년에 대하여 산정된 장래수질에 대하여 기준부하량의 경우 약 30 CMS의 유량이 본류구간에 대하여 제시된 수질기준을 만족하기에 적절한 것으로 모의되었다.

• 한국물환경학회지
• /
• 제29권5호
• /
• pp.681-690
• /
• 2013

Watershed models have been increasingly used to support an integrated management of land and water, non-point source pollutants, and implement total daily maximum load policy. However, these models demand a great amount of input data, process parameters, a proper calibration, and sometimes result in significant uncertainty in the simulation results. For this reason, uncertainty analysis is necessary to minimize the risk in the use of the models for an important decision making. The objectives of this study were to evaluate three different uncertainty analysis algorithms (SUFI-2: Sequential Uncertainty Fitting-Ver.2, GLUE: Generalized Likelihood Uncertainty Estimation, ParaSol: Parameter Solution) that used to analyze the sensitivity of the SWAT(Soil and Water Assessment Tool) parameters and auto-calibration in a watershed, evaluate the uncertainties on the simulations of runoff and sediment load, and suggest alternatives to reduce the uncertainty. The results confirmed that the parameters which are most sensitive to runoff and sediment simulations were consistent in three algorithms although the order of importance is slightly different. In addition, there was no significant difference in the performance of auto-calibration results for runoff simulations. On the other hand, sediment calibration results showed less modeling efficiency compared to runoff simulations, which is probably due to the lack of measurement data. It is obvious that the parameter uncertainty in the sediment simulation is much grater than that in the runoff simulation. To decrease the uncertainty of SWAT simulations, it is recommended to estimate feasible ranges of model parameters, and obtain sufficient and reliable measurement data for the study site.

• 한국물환경학회지
• /
• 제33권1호
• /
• pp.51-62
• /
• 2017

The purpose of this study is to evaluate on the applicability of Load Duration Curve (LDC) method using Maintenance of Variance Extension types 2 method and sampling data for efficient total maximum daily loads at the Nakbon-A unit watershed in Korea. The LDC method allows for characterizing water quality data such as BOD, TOC, T-N and T-P in this study at different flow regimes(or quarters). BOD usually exceeded the standard value (exceedance probability 50%) at low flow zone. On the other hand, TOC, T-N, T-P usually exceeded the standard value at dry and low flow zone. Seasonally all water quality variables usually exceeded the standard value at Q1(Jan-Mar) and Q2(Apr-Jun) zones. Improvement of effluent control from wastewater treatment plants are effective to improve BOD and T-P.

• 환경영향평가
• /
• 제30권6호
• /
• pp.355-360
• /
• 2021

국내 물관리정책은 농도 중심의 물관리에서 부하량 관리 중심의 오염총량관리로 전환되면서 수질 및 수생태계에 변화를 가져왔다. 하지만 오염원의 변화와 유량 변동 등으로 총량제 시행 이후 수질 및 수생태계 건강성이 개선되었는지 판단하기 어려워 로그선형모델과 생물지표(저서성 대형무척추동물)를 활용하여 효과를 분석하였다. 그 결과 진위천수계의 BOD와 T-P농도는 각각 30%, 35% 저감되어 수질개선 효과를 보였으나, 저서생물지수(BMI) 결과 D등급에서 E등급으로 악화되었다. 진위천수계의 수생태계 건강성을 개선하기 위해서 생태하천을 가꾸는 노력이 필요하다.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1401-1411
• /
• 2013

호소형 하천으로 정체수역 특성을 갖는 서낙동강에서의 대저수문 유입량과 녹산수문 방류량은 오염총량관리 시행계획 대상유역인 낙본N 단위유역의 수질관리에 있어서 매우 중요한 영향을 미친다. 하지만 기준유량을 산정하기 위한 실측자료는 매우 부족하고, 대저수문과 녹산수문의 운영자료는 수문개도시 최대가능방류량만을 사용하고 있으므로 실측 방류량과는 많은 차이를 보이고 있다. 본 연구에서는 대저수문과 녹산수문의 운영자료를 수집하고, 이를 환경부 수질측정망 월별 수질변화와의 비교를 통해 분석하였다. 또한 대저수문과 녹산수문의 운영에 따른 서낙동강 본류의 비정상상태의 유량변화와 이에 따른 수질변화를 실측하였다. 낙동강 본류 수위, 서낙동강 수위, 조위 등의 영향을 받는 대저수문 유입과 녹산수문 방류에 의한 서낙동강 유량변화를 실측하였으며, 이는 대저수문과 녹산수문의 최적 운영을 통한 서낙동강의 수질 개선 대책 수립의 기초자료로 활용될 수 있을 것으로 판단된다.

• 한국농공학회지
• /
• 제18권1호
• /
• pp.4038-4051
• /
• 1976

This study was intended to provide the basic design creteria for the refrigerated storage, and to estimate the required optimum capacity of refrigerator for the different sizes and kinds of the existing fruit storage. The structural characteristics of the existing fruit storages in Pyungtaek-khun of Kyungki-do were surveyed. The average out-door air temperature during the expected storage life after harvesting, was obtained by analyzing the weather information. The heat transfer rates through the different models of storage walls were estimated. The refrigerating load required for different models of fruit storage was analyzed in the basis of out-door air temperature. The results obtained in this study are summarized as follows: 1. The fruit storages surveyed were constructed on-ground, under-ground and sub-ground type buildings. The majority of them being the on-ground buildings are mostly made of earth bricks with double walls. Rice hull was mostly used as the insulating materials for their walls and ceilings. About 42% of the buildings were with the horizontal ceiling, 22% with sloped ceiling, and about 36% without ceiling. About 60% of the storage buildings had floor without using insulated material. They were made of compacted earth. 2. There is no difference in heat transfer among six different types of double walls. The double wall, however, gives much less heat transfer than the single wall. Therefore, the double wall is recommended as the walls of the fruit storage on the point of heat transfer. Especially, in case of the single wall using concrete, the heat transfer is about five time of the double walls. It is evident that concrete is not proper wall material for the fruit storage without using special insulating material. 3. The heat transfer through the storage walls is in inverse proportion to the thickness of rice hull which is mostly used as the insulating material in the surveyed area. It is recommended that the thickness of rice hull used as the insulating material far storage wall is about 20cm in consideration of the decreasing rate of heat transfer and the available storage area. 4. The design refrigerating load for the on-ground storages having 20 pyung area is estimated in 4.07 to 4.16 ton refrigeration for double walls, and 5.23 to 6.97 ton refrigeration for single walls. During the long storage life, however, the average daily refrigerating load is ranged from 0.93 to 0.95 ton refrigeration for double walls, and from 1.15 to 1.47 ton refrigeration for single walls, respectively. 5. In case of single walls, 50.8 to 61.4 percent to total refrigerating load during the long storage life is caused by the heat transferred into the room space through walls, ceiling and floor. On the other hand, 39.1 to 40.7 percent is for the double walls. 6. The design and average daily refrigerating load increases in linear proportion to the size of storage area. As the size increases, the increasing rate of the refrigerating load is raised in proportion to the heat transfer rate of the wall. 7. The refrigerating load during the long storage life has close relationship to the out-door air temperature. The maximum refrigeration load is shown in later May, which is amounted to about 50 percent to the design refrigerating load. 8. It is noted that when the wall material having high heat transfer rate, such as the single wall made of concrete, is used, heating facilities are required for the period of later December to early February.

• 환경영향평가
• /
• 제19권1호
• /
• pp.83-89
• /
• 2010

The areas for agricultural purposes in Korea are decreasing every year because of urbanization. However, it is still 17.6% of the total national boundary on 2008. Most of the rice paddy fields are located near the waterbodies which require lots of water during rainy season from May to September. Also lots of nitrate and phosphate chemical fertilizers are spread on the fields every year in order to supply the nutrients for vegetation. The excess nutrients is impairs the water quality of rivers and lakes when it is washed out from the fields. The Korean Ministry of Environment (MOE) adapted the new water quality improvement program, which is the Total Daily Maximum Load, to improve the water quality and to protect the aquaecosystems. The constructed wetland is one of the possible ways to treat the agricultural runoff. The constructed wetland on this study area was constructed by MOE in 2007 to evaluate the application of the constructed wetlands. Plant growth continues to increase during the summer until it reaches its highest biomass of 6,032 g/$m^2$ in August and September. More researches about sedimentation, vegetation, water balance, etc. were performed to evaluate the removal efficiency, to find the removal mechanisms and to make the guidelines for design and maintenance.

• 한국습지학회지
• /
• 제19권2호
• /
• pp.240-245
• /
• 2017

본 연구에서는 생태계서비스 중 수질조절 서비스 가치 평가를 수행하기 위해 생태계서비스 수질조절 서비스의 물리량을 정량적으로 평가하였고 이를 이용하여 경제적 가치를 평가하는 방안을 마련하였다. 과거에 비해 수질이 개선되고, 어류 등 수생생물의 종과 수가 늘었더라도, 그 요인은 생태계의 수질조절 서비스와 수질개선를 위한 환경기초시설의 확충, 수질환경규제 등 복합적인 요인에 기인된다. 그 중 생태계 조절서비스 가치에 대해 정량적으로 산정할 수 있는 방법을 모색하는 것을 연구의 목적으로 설정하였다. 본 연구에서 생태계의 수질조절 서비스를 정량적 가치를 규명하기 위해 수질오염총량을 활용하는 방법에 대해 제안하였다. 이와 함께 생태계의 수질조절 서비스의 산정된 물리적 수질조절량에 처리단가를 곱함으로써 경제적 가치 평가 방안을 제시하였다. 마지막으로 개발된 평가기법을 이용하여 낙동강 수계에 BOD, T-P 항목에 대해서 생태계 수질가치를 평가하였다.

• 한국습지학회지
• /
• 제9권2호
• /
• pp.1-8
• /
• 2007

최근 환경정책의 변화는 수질오염총량관리제 및 비점오염원관리로 요약된다. 이는 과거 30년 동안의 급격한 환경기술의 발전에도 불구하고 상수원수인 수질의 악화에 기인한다. 수질오염총량관리제란 환경시설에서의 농도규제가 아닌, 하천에서의 비점오염원을 포함한 총량규제를 위한 제도로 점오염원관리와 더불어 비점오염원 관리가 필수적으로 요구된다. 비점오염원이란 각종 토지이용을 의미하며, 개발사은 비점오염원의 부하량 증대에 큰 영향을 끼치는 원인이다. 이에 개발사업에 따른 비점오염원을 제어하기 위해서 비점저감시설등의 설치가 의무화 되고 있다. 비점저감시설 중 자연형 비점관리시설등의 규모산정에 관한 내용은 환경부에서 제시하고 있으며, 이에 관한 규정에서 강우량 해석을 기초로 하여 시설의 규모를 산정할 것을 요구하고 있다. 본 연구에서는 리조트 스키장 개발사업에서 발생 가능한 비점오염물질을 처리하기 위한 자연형 비점오염물질관리시설인 저류지의 규모를 산정하기 위하여 최근 5년간 및 10년간의 강우사상을 분석하였다. 강우량 해석을 통하여 적정 처리를 위한 강우량을 해석한 결과, 적정 저류지 용량은 누적강우량 기준으로 7.4mm가 가장 경제적인 것으로 나타났다.