• 한국주거학회논문집
• /
• 제14권2호
• /
• pp.77-88
• /
• 2003

The access area, so called "core" in the housing block, makes a buffer zone between public open space and private interior space, as well as offers chances of communication for the users. Planning and design of this area, however, tend to be not attended, comparing with another spaces in the multifamily housing block. This paper is aimed at investigating examplary model European cases and, thus, finding out some positive and applicable planning skills for multifamily housing in Korea. This study covers following aspects; firstly, the important social meaning of core area was analyzed in comparison of Korea and Europe, secondly, intensive studies on the spots, visiting German, Austrian and Dutch cases, made it possible to grasp the prevailling tendency toward assessment of this area in the Continent, Thirdly, useful planning elements and skills by European examples for more user friendliness, more economization and raising the quality of spatial design and sequential experience were founded out with regard to various core types. and lastly, some concrete guidelines for planning are presented for the improvement of so far monotnousely designed core area in the local multifamily housing. Consequently those European cases made it clear that the planning of core area is closely related to the total design of housing blocks. This study maybe conducive not only to the planning of this area, but also further to the increase of the quality of life in multifamily housing.y housing.

• 한국결정성장학회지
• /
• 제15권5호
• /
• pp.208-215
• /
• 2005

골재를 제조할 때 골재의 중앙에 만들어지는 블랙코어(black core)의 형성 메커니즘을 살펴보기 위해 적점토, 탄소(carbon), 산화철$(Fe_2O_3)$이 혼합된 직경 10mm 구형골재의 조성, 소성온도, 소성시간, 소성분위기, 소성방법을 변화시키면서 각각의 비중, 흡수율, 블랙코어 면적비$(\%)$, 파괴강도, Fe 총량분석, XRF를 측정하고 비교하였다. 소량의 산화철 첨가는 골재의 물성에 큰 영향을 미치지 않는 반면 탄소는 많이 첨가될수록, 소성온도가 증가할수록 블랙코어가 더 많이 형성되었고, 블랙코어의 비율이 증가하면 그만큼 비중은 감소하고 흡수율은 증가하였다 산화분위기에서 소성시킨 골재는 껍질 (shell)과 블랙코어가 뚜렷하게 구분되는 반면 환원분위기에서 소성한 시편에서는 시편의 단면전체에 블랙코어가 형성되었고, 산화분위기와 중성분위기와는 달리 환원분위기에서 소성된 시편에서는 탄소첨가량이 증가할수록 비중이 증가했으며, 전반적인 비중은 가장 낮았다. 흡수율은 모든 분위기에서 탄소 첨가량이 증가할수록 증가했다. 소성방법을 달리하여 실험한 결과 직화소성한 시편에서는 블랙코어가 잘 형성되었고, 승온소성한 시편에 비해 비중은 작고 흡수율은 높았다. 또한 파괴강도의 측정결과를 통해 블랙코어가 형성되지 않은 골재시편의 강도가 블랙코어가 형성된 시편보다 다소 크다는 사실을 알 수 있었다. Fe총량분석결과 블랙코어에서 껍질보다 많은 Fe와 FeO가 분포하였고, 껍질에는 적색을 띠는 $Fe_2O_3$가 많이 분포되어 있었다. XRF 분석 결과를 통해 탄소는 블랙코어 형성부위에서만 존재한다는 것을 알 수 있었다.사 결과 외형은 YF04 $1.0\%$ 처리구가 3.64으로 높게 나타났으며 YM03 $0.1\%$ 처리구가 3.00으로 가장 낮았다(P>0.05). 색은 YF04 $1.0\%$ 처리구가 4.00으로 높았으며 YF04 $0.1\%$ 처리구는 2.93으로 가장 낮았다(P<0.05). 다즙성은 YF04 $1.0\%$ 처리구가 3.50으로 가장 높게 나타났으며 YM03 $0.1\%$와 YM03 $1.0\%$ 처리구가 각각 3.07로 낮았다 (P>0.05).구보다 약간 증가하였으나 큰 차이를 나타내지 않았다.다리살의 콜레스테롤 함량도 감소하는 경향을 보였으나 유의적인 차이는 없었다.적으로 작용하였다.있다.>16$\%$>0$\%$ 순으로 좋게 평가되었다. 결론적으로 감농축액의 첨가는 당과 탄닌성분을 함유함으로써 인절미의 노화를 지연시키고 저장성을 높이는데 효과가 있는 것으로 생각된다. 또한 인절미를 제조할 때 찹쌀가루에 8$\%$의 감농축액을 첨가하는 것이 감인절미의 색, 향, 단맛, 씹힘성이 적당하고 쓴맛과 떫은맛은 약하게 느끼면서 촉촉한 정도와 부드러운 정도는 강하게 느낄수 있어서 전반적인 기호도에서 가장 적절한 방법으로 사료된다.비위생 점수가 유의적으로 높은 점수를 나타내었다. 조리종사자의 위생지식 점수와 위생관리 수행수준의 상관관계를 조사한 결과, 위생지식의 기기설비위생은 위생관리 수행수준의 합계(p<0.01)에서 유의적인 상관관계(p<0.01)를 나타내었으며, 위생지식의 식중독 및 미생물은

• Journal of Ecology and Environment
• /
• 제46권4호
• /
• pp.316-323
• /
• 2022

Background: We developed a habitat suitability index (HSI) model for Pedicularis hallaisanensis, a Grade II Endangered Species in South Korea. To determine the habitat variables, we conducted a literature review on P. hallaisanensis with a specific focus on the associated spatial factors, climate, topography, threats, and soil factors to derive five environmental factors that influence P. hallaisanensis habitats. The specific variables were defined based on the collected data and consultations with experts in the field, with the validity of each variable tested through field studies. Results: Mt. Seorak had a suitable habitat area of 2.48 km² for sites with a score of 1 (0.62% of total area) and 0.01 km² for sites with a score of 0.9. Mt. Bangtae had a suitable habitat area of 0.03 km² for sites with a score of 1 (0.02% of total area) and 0 km² for sites with a score of 0.9. Mt. Gaya showed 0.13 km² of suitable habitat for sites with a score of 1 (0.17% of total area) and 0 km² for sites with a score of 0.9. Lastly, Mt. Halla showed 3.12 km² of suitable habitat related to sites with a score of 1 (2.04% of total area) and 4.08 km² of sites with a score of 0.9 (2.66% of total area). Mt. Halla accounts for 73.1% of the total core habitat area. Considering the climatic, soil, and forest conditions together with standardized collection sites, our results indicate that Mt. Halla should be viewed as a core habitat of P. hallaisanensis. Conclusions: The findings in this study provide useful data for the identification of core habitat areas and potential alternative habitats to prevent the extinction of the endangered species, P. hallaisanensis. Furthermore, the developed HSI model allows for the prediction of suitable habitats based on the ecological niche of a given species to identify its unique distribution and causal factors.

• 소성∙가공
• /
• 제32권1호
• /
• pp.12-19
• /
• 2023

The armature core is a part responsible for the skeleton of the steering wheel. Currently, in the case of commercial trucks, the main parts of the parts are manufactured separately and then the product is produced through welding. In the case of this production method, quality and cost problems of the welded parts occur, and an integrated armature core made of magnesium alloy is used in passenger vehicles. However, in the case of commercial trucks, there is no application case and research is insufficient. Therefore, this study aims to develop an all-in-one armature core that simultaneously applies a magnesium alloy material and a die casting method to reduce the weight and improve the quality of the existing steel armature core. The product was modeled based on the shape of a commercial product, and finite element analysis (FEA) was performed through Ls-dyna, a general-purpose analysis program. Through digital image correlation (DIC) and uniaxial tensile test, the accurate physical properties of the material were obtained and applied to the analysis. A total of four types of compression were applied by changing the angle and ground contact area of the product according to the actual reliability test conditions. analysis was carried out. As a result of FEA, it was confirmed that damage occurred in the spoke area, and spoke thickness (t_spoke), base thickness (t_base), and rim and spoke connection (R) were designated as design variables, and the total weight and maximum equivalent stress occurring in the armature core We specify an objective function that simultaneously minimizes . A prediction function was derived using the sequential response surface method to identify design variables that minimized the objective function, and it was confirmed that it was improved by 22%.

• 한국산림과학회지
• /
• 제99권2호
• /
• pp.226-234
• /
• 2010

This study was conducted to examine the effects of pruning season on the compartmentalization of pruning wounds in Acer palmatum and Pinus strobus. A total of eighty five field-grown trees for each species were allocated to five different seasons, early- and late-winter, mid-spring, mid- and late-summer, for pruning treatments. Wound closure rate (WCR) of the two species for one year after treatment, area of discolored stem tissue on the medial longitudinal surface and cambial dieback length under the pruning wound of A. palmatum were measured. Changes of total phenols and variations of extractives, holocellulose and lignin at the treated branch unions were examined. In WCR of A. palmatum, late-winter (March, 39.8%) and mid-spring (May, 39.7%) were higher than any other seasons, while early-winter (November, 28.4%) was significantly lower than late-winter and mid-spring. P. strobus showed similar results with A. palmatum. The WCR of early-winter (57.2%) was the lowest significantly among the five seasons, and mid-spring (73.5%) and late-winter (71.4%) showed higher a WCR than other seasons. In the discolored/wound area ratio of A. palmatum, early-winter (73.2%) was the highest by far, and mid- (July) and latesummer (September, 36.7%, respectively) were the lowest among the five seasons. In the length of cambial dieback, two dormant seasons, early- and late-winter were longer than any other seasons. Phenol contents at the treated branch union were changed in line with the seasonal fluctuation of the tree. Total phenols in the below core of the treated union were higher than those of the branch union with living branch, while little differences were seen in the above core. At the branch core of the treated union, phenols of A. palmatum decreased one month after the treatments, but P. strobus maintained similar to or a little higher than those at the controls. The major changes in chemical composition at pruning wounds were extractives and lignin increased by less than 20% in A. palmatum, while extractives in P. strobus remarkably increased by 70%.

• 한국환경생태학회지
• /
• 제18권2호
• /
• pp.158-166
• /
• 2004

자연생태계의 보전을 위한 지역구분을 위하여 백두대간(남덕유산-소사고개) 구간을 조사한 식생조사 자료를 바탕으로 식생의 보전가치를 식생지수라는 것으로 수치화 하는 방법을 제시해 보고자 한다. 식생지수는 생물다양성, 임분의 보전가치, 환경의 청정성, 임분의 역사성, 입지의 생산성 등을 바탕으로 수치화 하였다. 식생지수는 백두대간 관리범위 설정에 이용될 수 있을 것이라 사료된다. 식생지수 I의 경우 총 66개의 조사지 중에서 8개 지역 12.1%가 핵심지역에 속하고, 21개 지역 31.8%, 37개 지역 56.1%가 각각 완충지역과 전이지역에 속하는 것으로 나타났다. 식생지수II의 경우 28개 지역 41.9%가 핵심지역에 속하고, 19개 지역 28.8%, 19개 지역 28.8%가 각각 완충지역과 전이지역에 속하는 것으로 나타났다.

• 한국환경생태학회지
• /
• 제16권3호
• /
• pp.223-232
• /
• 2002

자연생태계의 보전을 위한 지역구분을 위하여 백두대간(피재-도래기재) 구간을 조사한 식생조사 자료를 바탕으로 식생의 보전가치를 식생지수라는 것으로 수치화하는 방법을 제시해 보고자 한다. 식생지수는 생물다양성, 임분의 보전가치, 환경의 청정성, 임분의 역사성 입지의 생산성 등을 바탕으로 수치화하였다. 식생지수는 백두대간 관리범위 설정에 이용될 수 있을 것이라 사료된다. 식생지수 I의 경우 총 113개의 조사지 중에서 59개 지역 52.2%가 핵심지역에 속하고, 34개 지역 30.1%, 20개 지역 17.7%가 각각 완충지역과 전이지역에 속하는 것으로 나타났다. 식생지수II의 경우 49개 지역 43.4%가 핵심지역에 속하고, 38개 지역 33.6%, 26개 지역 23.0%가 각각 완충지역과 전이지역에 속하는 것으로 나타났다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권4호
• /
• pp.37-53
• /
• 2017

Purpose: As the structure of the disease has been changed and the infectious disease has been increased, the demand for diagnostic examination has been increasing. So, the department of laboratory medicine in hospital has playing the important role accounting for about nineteen percent of total medical expenses in korea. This study is to investigate the laboratory function and spatial composition of the department and figure out the space area and space organization. Methods: Explore the literature review to identify the laboratory function. Limit to five cases of tertiary level general hospital having about a thousand bed and analyze the space layout and floor area to confirm the spatial composition. Classify the exam function and check the spatial composition and spatial organization. Results: This study allows 5 conclusions to be summarized. Laboratory medicine divided into nine part in regulation, but in space allocated into core lab, emergency lab and six part lab. Total laboratory area is $2,036m^2$ in average, and is composited with 60% for lab, 17% for office and 20% for public. Lab area per a bed presents $1.88m^2$. Microbiolgy and molecular lab area are getting large. Laboratory space organized into the four zone, like an entrance zone, core zone, rear zone and peripheral zone. Emergency and transfusion lab are allocated in entrance zone, hematology chemistry and immunology in core lab, microbiology and molecular lab in rear, support offices in peripheral zone. The most important point was to check the spatial composition of the Laboratory Medicine according to the inspection function. Implications: This study can be used as a useful data in planning and designing a Laboratory Medicine Department.

• 소성∙가공
• /
• 제14권2호
• /
• pp.147-152
• /
• 2005

The objective of this study is to develop an optimal drawing die for the clad wire drawing process. Cu-clad wire, which has the advantages of the high strength of a steel core and the electro-conductivity, corrosion resistance of a copper layer, is widely being used in the field of the telecommunications, electric-electronic and military technology industries. It is important to obtain uniformly coated rate when producing clad wires. Drawing process of clad wire will be influenced on damage and coated rate of core and sleeve for process variables such as semi-die angle and reduction in area. Therefore, in this study, the finite-element result obtained in this study was analyzed to the effect of the various forming parameters, which included the semi-die angle and reduction in area. The coated rate will be predicted with observation of copper coated rate variation according to total reduction in area and the optimal pass schedule will be set up through proper reduction in area and semi-die angle variation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.293-299
• /
• 2016

Recently, as IoT (Internet of Things) becomes more important, low cost implementation of sensor nodes also becomes critical issues for two well-known standards, IEEE 802.15.4 and IEEE 802.15.6 which stands for WPAN (Wireless Personal Area Network) and WBAN (Wireless Body Area Network), respectively. This paper presents the area-optimized AES-CCM (Advanced Encryption Standard - Counter with CBC-MAC) hardware security engine which can support both IEEE 802.15.4 and IEEE 802.15.6 standards. First, for the low cost design, we propose the 8-bit AES encryption core with the S-box that consists of fully combinational logic based on composite field arithmetic. We also exploit the toggle method to reduce the complexity of design further by reusing the AES core for performing two operation mode of AES-CCM. The implementation results show that the total gate count of proposed AES-CCM security engine can be reduced by up to 42.5% compared to the conventional design.