• Asian-Australasian Journal of Animal Sciences
• /
• 제20권6호
• /
• pp.971-975
• /
• 2007

Two experiments were conducted to evaluate the feeding values of red pepper seed oil meal (RPSOM) and to investigate its dietary supplementation on broiler performances. In Exp. 1, nutritional values of RPSOM were evaluated by analyzing chemical composition and determining true metabolizable energy (TME), nitrogen corrected TME (TMEn) and true available amino acid (TAAA). RPSOM contained 22.50% of CP, 4.75% of ether extract, 27.70% of crude fiber, 4.73% of crude ash and 49.97 ppm of xanthophylls. The contents of capsaicin and dihydrocapsaicin were 34 mg and 31 mg/100 g DM, respectively. The values of TME and TMEn determined by force-feeding 16 roosters were 1.73 kcal/g and 1.63 kcal/g DM, respectively. The average TAAA value of 17 amino acids was 85.22%. In Exp. 2, a total of 225 Ross male broiler chicks, 3 weeks old, were randomly divided into 9 groups of 25 birds each and assigned to three experimental diets containing 0 (control), 5 or 10% RPSOM fed ad libitum for 3 weeks. No significant differences were observed in growth performances and carcass characteristics. The level of serum cholesterol in the 10% RPSOM group was significantly lower than that of the control group (113.92 vs. 137.50 mg/dl). The dietary RPSOM at 5 and 10% levels increased the content of C18:2 ${\omega}{\sigma}$ in leg muscle compared with the control group. The results suggested that RPSOM can be included into broiler feed up to 10% without any negative effects on broiler performances and physiological responses and used as a non-conventional plant protein source, if its nutritional values are well evaluated.

• 천문학회지
• /
• 제44권6호
• /
• pp.217-234
• /
• 2011

We present two large cosmological N-body simulations, called Horizon Run 2 (HR2) and Horizon Run 3 (HR3), made using $6000^3$ = 216 billions and $7210^3$ = 374 billion particles, spanning a volume of $(7.200\;h^{-1}Gpc)^3$ and $(10.815\;h^{-1}Gpc)^3$, respectively. These simulations improve on our previous Horizon Run 1 (HR1) up to a factor of 4.4 in volume, and range from 2600 to over 8800 times the volume of the Millennium Run. In addition, they achieve a considerably finer mass resolution, down to $1.25{\times}10^{11}h^{-1}M_{\odot}$, allowing to resolve galaxy-size halos with mean particle separations of $1.2h^{-1}$Mpc and $1.5h^{-1}$Mpc, respectively. We have measured the power spectrum, correlation function, mass function and basic halo properties with percent level accuracy, and verified that they correctly reproduce the CDM theoretical expectations, in excellent agreement with linear perturbation theory. Our unprecedentedly large-volume N-body simulations can be used for a variety of studies in cosmology and astrophysics, ranging from large-scale structure topology, baryon acoustic oscillations, dark energy and the characterization of the expansion history of the Universe, till galaxy formation science - in connection with the new SDSS-III. To this end, we made a total of 35 all-sky mock surveys along the past light cone out to z = 0.7 (8 from the HR2 and 27 from the HR3), to simulate the BOSS geometry. The simulations and mock surveys are already publicly available at http://astro.kias.re.kr/Horizon-Run23/.

• 대기
• /
• 제24권4호
• /
• pp.457-470
• /
• 2014

Thermodynamic conditions related with localized torrential rainfall in the middle west region of Korean peninsula are examined using radar rain rate and radiosonde observational data. Localized torrential rainfall events in this study are defined by three criteria base on 1) any one of Automated Synoptic Observing System (ASOS) hourly rainfall exceeds $30mmhr^{-1}$ around Osan, 2) the rain (> $1mmhr^{-1}$) area estimated from radar reflectivity is less than $20,000km^2$, and 3) the rain (> $10mmhr^{-1}$) cell is detected clearly and duration is short than 24 hr. As a result, 13 cases were selected during the summer season of 10 years (2004-13). It was found that the duration, the maximum rain area, and the maximum volumetric rain rate of convective cells (> $30mmhr^{-1}$) are less than 9hr, smaller than $1,000km^2$, and $15,000{\sim}60,000m^3s^{-1}$ in these cases. And a majority of cases shows the following thermodynamic characteristics: 1) Convective Available Potential Energy (CAPE) > $800Jkg^{-1}$, 2) Convective Inhibition (CIN) < $40Jkg^{-1}$, 3) Total Precipitable Water (TPW) ${\approx}$ 55 mm, and 4) Storm Relative Helicity (SRH) < $120m^2s^{-2}$. These cases mostly occurred in the afternoon. These thermodynamic conditions indicated that these cases were caused by strong atmospheric instability, lifting to overcome CIN, and sufficient moisture. The localized torrential rainfall occurred with deep moisture convection result from the instability caused by convective heating.

• Fisheries and Aquatic Sciences
• /
• 제17권3호
• /
• pp.319-324
• /
• 2014

An 8 weeks feeding trial was carried out to evaluate the effects of dietary microbial phytase (P) supplementation on nutrient digestibility, and body composition in juvenile olive flounder Paralichthys olivaceus fed soybean meal-based diets. Seven experimental diets were formulated to be isonitrogenous and isocaloric to contain 50.0% crude protein (CP) and 16.7 kJ of available energy/g with or without dietary phytase supplementation. White fish meal (FM) provided 92.4% of the total protein in the basal diet ($S_0$), in the other 6 diets, 30% or 40% FM protein was replaced by soybean meal: 70% FM + 30% soybean meal ($S_{30}$); 70% FM + 30% SM + 1000 U phytase/kg diet ($S_{30}P_{1000}$); 70% FM + 30% SM + 2000 U phytase/kg diet ($S_{30}P_{2000}$); 60% FM + 40% SM ($S_{40}$); 60% FM + 40% SM + 1000 U phytase/kg diet ($S_{40}P_{1000}$); and 60% FM + 40% SM + 2000 U phytase/kg diet ($S_{40}P_{2000}$). After two weeks of the conditioning period, triplicate groups of 25 fish initially averaging $6.15{\pm}0.04g$ ($mean{\pm}S.D.$) were randomly distributed into the aquarium and were fed one of the experimental diets for 8 weeks. After feeding trial, supplementation of phytase significantly improved the apparent digestibility coefficients of phosphorus in flounder diets (P<0.05) containing 30% and 40% soybean meal regardless the levels. However, phytase had no significant influence on growth performance and whole body composition of fish. Based on the experimental results, we conclude that dietary supplementation of phytase could improve the apparent digestibility coefficient of phosphorus in olive flounder.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.388-395
• /
• 2000

This study was performed to examine the effects of infrared (IR)/heated-air combination drying on some quality attributes of Korean white ginsengs. Ginseng roots were dried in a dryer where both the far infrared ray and heated-air are available as drying energy sources. Diametral shrinkage, external color, total saponin content, and ginsenosides and free sugar composition of the IR/heated-air combination dried ginsengs were measured and compared with those of commercial white ginseng products. The external color became lower in lightness and higher in saturation as the IR radiating plate temperature increased. IR/heated-air combination dried white ginsengs at IR plate temperature of 100$^{\circ}C$ was comparable to the commercial white ginseng products in color characteristics. Diametral shrinkage ratios ranged from 20 to 36% and appeared to be independent on the different drying methods. No definite evidence could be found whether the IR/heated-air combination drying and the conventional. hot-air drying practice resulted in white ginsengs having different ginsenoside contents and compositions. No conclusion could be made on whether the various drying treatments used in the study had effects on the free sugar contents and compositions of white ginsengs.

• 한국지진공학회논문집
• /
• 제7권4호
• /
• pp.1-13
• /
• 2003

본 연구에서는 전단변형을 고려한 비대칭 박벽 곡선보의 자유진동해석을 수행할 수 있는 일반이론을 제시하기 위하여, 3차원 연속체에 대한 가상일의 원리로부터 전단변형 효과를 고려하고 비대칭 박벽단면과 ？(Warping)을 포함하는 변위장을 도심 축에 대해 정의한 후 곡선보의 변형도-변위관계로부터 공간 박벽 곡선보의 일반화된 탄성변형에너지와 운동에너지를 새롭게 유도한다. 또한, 전단변형이 고려된 곡선보의 총포텐셜에너지에 대해 변분을 취함으로써 평형방정식과 힘-변위관계를 제시한다. 한편, 제시된 이론에 대해 등매개 보요소를 도입하여 유한요소 정식화를 수행하였으며 곡선보의 동적 거동특성을 조사하기 위하여 전단변형, 곡률효과 그리고 진동모드에 대한 매개변수 연구를 수행한다. 마지막으로, 본 연구의 타당성을 입증하기 위하여, 다양한 해석예제에 대한 3차원 고유진동수를 산정하고 타 연구자들의 결과 및 ABAQUS의 쉘요소를 이용한 해석결과와 비교ㆍ검증한다.

• Journal of Animal Science and Technology
• /
• 제61권3호
• /
• pp.138-146
• /
• 2019

Vitamin $B_3$ (niacin) is essential for all living cells and plays a central role in energy metabolism and oxidative phosphorylation. Vitamin $B_3$, a water-soluble vitamin, is present in the form of nicotinic acid and nicotinamide, a monocarboxylic acid derivative of pyridine. While nicotinic acid is commonly effective in lowering cholesterol levels, unlike nicotinic acid, nicotinamide is ineffective on lipids. Presence rates of nicotinic acid and nicotinamide, which are the available forms of vitamin $B_3$, are different for each food. However, the studies in the literature are generally based on the analysis of total amount of vitamin $B_3$ in foods and the studies determining the profile of vitamin $B_3$ in foods are limited. The aim of the study was to determine the vitamin $B_3$ profiles of 10 kinds of animal based food and 10 different plant based food samples. In this study, 10 kinds of animal based food samples consisting of veal (veal steak fillet), chicken (breast), turkey meat (thigh), goat meat (leg, belly), lamb (leg, back, arm), mutton (belly), bovine meat (loin) and 10 different plant based food samples namely; barley, rye, wheat (bread), wheat (durum), oat, rice, dried pea, green lentil, red lentil and chickpea were studied by high performance liquid chromatography using post-column derivatization system. The presence rates of nicotinic acid and nicotinamide were determined in the meat samples as 30% and 70% and as 87% and 13% in the cereal and legume samples, respectively. Nicotinic acid levels were found in low amounts in the meat samples. The amounts of nicotinic acid in the cereal and legume samples were significantly higher than the meat samples. Consequently, the plant based foods such as cereals and legumes, with a ratio of 87% nicotinic acid presence, standout as the best source of nicotinic acid and encouraging regular intake of those cereals and legumes containing rich nicotinic acid would remove nicotinic acid deficiency in human.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.47-56
• /
• 2021

This paper deals with damage detection using a Gapped Smoothing Method (GSM) combined with deep learning. Convolutional Neural Network (CNN) is a model of deep learning. CNN has an input layer, an output layer, and a number of hidden layers that consist of convolutional layers. The input layer is a tensor with shape (number of images) × (image width) × (image height) × (image depth). An activation function is applied each time to this tensor passing through a hidden layer and the last layer is the fully connected layer. After the fully connected layer, the output layer, which is the final layer, is predicted by CNN. In this paper, a complete machine learning system is introduced. The training data was taken from a Finite Element (FE) model. The input images are the contour plots of curvature gapped smooth damage index. A free-free beam is used as a case study. In the first step, the FE model of the beam was used to generate data. The collected data were then divided into two parts, i.e. 70% for training and 30% for validation. In the second step, the proposed CNN was trained using training data and then validated using available data. Furthermore, a vibration experiment on steel damaged beam in free-free support condition was carried out in the laboratory to test the method. A total number of 15 accelerometers were set up to measure the mode shapes and calculate the curvature gapped smooth of the damaged beam. Two scenarios were introduced with different severities of the damage. The results showed that the trained CNN was successful in detecting the location as well as the severity of the damage in the experimental damaged beam.

• Steel and Composite Structures
• /
• 제46권6호
• /
• pp.839-856
• /
• 2023

This work presents a simple four-unknown refined integral plate theory for mechanical and thermal buckling behaviors of functionally graded (FG) plates resting on Visco-Pasternak foundations. The proposed refined high order shear deformation theory has a new displacement field which includes indeterminate integral variables and contains only four unknowns in which any shear correction factor not used, with even less than the conventional theory of first shear strain (FSDT). Governing equations are deduced from the principle of minimum total potential energy and a Navier type analytical solution is adopted for simply supported FG plates. The Visco-Pasternak foundations is considered by adding the impact of damping to the usual foundation model which characterized by the linear Winkler's modulus and Pasternak's foundation modulus. The accuracy of the present model is demonstrated by comparing the computed results with those available in the literature. Some numerical results are presented to show the impact of material index, elastic foundation type, and damping coefficient of the foundation, on the mechanical and thermal buckling behaviors of FG plates.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권3호
• /
• pp.49-55
• /
• 2023

This paper presents the design of a re-liquefaction system as a BOG (boil-off gas) handling process in liquid hydrogen transport vessels. The total capacity of the re-liquefaction system was assumed to be 3 ton/day, with a BOR (boil-off rate) of 0.2 %/day inside the cargo. The re-liquefaction cycle was devised using the He-Brayton Cycle, incorporating considerations of BOG capacity and operational stability. The primary components of the system, such as compressors, expanders, and heat exchangers, were selected to meet domestically available specifications. Case studies were conducted based on the specifications of the components to determine the optimal design parameters for the re-liquefaction system. This encompassed variables such as helium mass flow rate, the number of compressors, compressor inlet pressure and compression ratio, as well as the quantity and composition of expanders. Additionally, an analysis of exergy destruction and exergy efficiency was carried out for the components within the system. Remarkably, while previous design studies of BOG re-liquefaction systems for liquid hydrogen vessels were confined to theoretical and analytical realms, this research distinguishes itself by accounting for practical implementation through equipment and system design.