• 대한의용생체공학회:의공학회지
• /
• 제39권3호
• /
• pp.134-139
• /
• 2018

One of the most common problems with pedicle screw system is pullout of the screw. This study was performed to evaluate the pullout strength and driving torque of newly designed pedicle screws. The design of three type screws were standard pedicle screw, which had single lead threaded and single pitched design (Type A), single pitched and dual lead threaded pedicle screw (Type B), dual pitched and dual lead threaded pedicle screw (Type C), respectively. The tests were performed in accordance with the ASTM standards using polyurethane (PU) foam blocks. There was no significant difference in pullout strength among three types of screw. Type B and Type C exhibited higher insertion torque and removal torque than Type A, respectively (p<0.05). Pedicle screws newly developed with dual pitched and dual lead threaded design showed higher driving torque without decrease in pullout strength compared to the standard pedicle screw and could be inserted more rapidly with the same number of revolutions.

• 한국위성정보통신학회논문지
• /
• 제7권3호
• /
• pp.94-98
• /
• 2012

정확한 토크 체결력을 제공하기 위하여 토크 측정기는 최소자승이 적용된 커브피팅 알고리즘을 사용한다. 본 논문에서 제안하는 보정 최소자승 커브피팅 알고리즘은 토크 정밀 측정을 사용하는 다양한 산업분야에서 볼트와 너트에 향상된 체결력을 제공할 수 있다. 먼저, 제안한 알고리즘에 대한 수학적 모델을 소개하고, 제안한 알고리즘을 시뮬레이션하여 기존 알고리즘과 그 결과를 비교하였다. 보정된 최소자승 알고리즘은 기존의 토크 측정에 사용되었던 알고리즘보다 낮은 표준 오차 값을 보임으로써 제안한 보정된 최소자승 알고리즘의 성능의 정확성을 증명한다. 따라서, 본 알고리즘을 토크 계측에 적용함으로써 정밀 산업기계 및 전자부품 그리고 기타 항공기, 우주선등 나사의 조임 체결력이 적용되는 산업분야에 적용함으로써 비용 및 안전성 향상에 기여될 것을 예상한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권4호
• /
• pp.484-490
• /
• 2012

This paper is devoted to investigate the feasibility of using a medium power ground-based laser to produce a torque on LEO satellites of various shapes. The laser intensity delivered to a satellite is calculated using a simple model of laser propagation in which a standard atmospheric condition and linear atmospheric interaction mechanism is assumed. The laser force is formulated using a geocentric equatorial system in which the Earth is an oblate spheroid. The torque is formulated for a cylindrical satellite, spherical satellites and for satellites of complex shape. The torque algorithm is implemented for some sun synchronous low Earth orbit cubesats. Based on satellites perigee height, the results demonstrate that laser torque affecting on a cubesat has a maximum value in the order of $10^{-9}$ which is comparable with that of solar radiation. However, it has a minimum value in the order of $10^{-10}$ which is comparable with that of gravity gradient. Moreover, the results clarify the dependency of the laser torque on the orbital eccentricity. As the orbit becomes more circular it will experience less torque. So, we can conclude that the ground based laser torque has a significant contribution on the low Earth orbit cubesats. It can be adjusted to obtain the required control torque and it can be used as an active attitude control system for cubesats.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.709-710
• /
• 2006

This paper deals with an automatic rotor design functional standard computation based on torque/volume for a synchronous reluctance motor (SynRM). The focus of this paper is the design relative to the torque/volume on the basis of each rated watt according to the rotor diameters of a SynRM. The coupled finite elements analysis (FEA) & sequential unconstrained minimization technique (SUMT) have been used to evaluate design solutions. The proposed procedure allows to define the rotor geometric design function according to the rotor diameter and rated watt starting from an existing motor or a preliminary design.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.368-379
• /
• 2017

In this paper, a direct torque control algorithm with novel duty cycle-based modulation is proposed for permanent magnet synchronous motor drives fed by neutral-point clamped three-level inverters. Compared with the standard DTC, the proposed algorithm can suppress steady-state torque ripples as well as ensure neutral-point potential balance and smooth vector switching. A unified torque/flux evaluation table with multiple voltage vectors and precise control levels is established and used in this method. This table can be used to evaluate the effects of duty-cycle vectors on torque and flux directly, and the elements of the table are independent of the motor parameters. Consequently, a high number of appropriate voltage vectors and their corresponding duty cycles can be selected as candidate vectors to reduce torque ripples by looking up the table. Furthermore, small vectors are incorporated into the table to ensure the neutral-point potential balance with the numerous candidate vectors. The feasibility and effectiveness of the proposed algorithm are verified by both simulations and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.98-100
• /
• 2007

This paper presents a analysis on the torque and power characteristics of standard 3-phase induction motor. An induction motor changes its characteristics parameters under the operation condition with the same capacity. In this paper, we analyzed that how the power and torque characteristics of induction motor would be changed according to the change of these parameters.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.85-88
• /
• 1991

압전 토오크 센서를 사용하는 고감도 자력계를 제작하였다. 미소진폭의 진동자기장을 자화된 시료에 인가할 때 생기는 토오크를 압전소자로 측정하였다. 그 토오크는 시료의 자화에 비례한다. 포화자 화의 측정오차는 기존치에 대하여 5% 이내였다.

• The Journal of Advanced Prosthodontics
• /
• 제6권1호
• /
• pp.35-38
• /
• 2014

PURPOSE. This study aimed to evaluate the correlation between microleakage and screw loosening at different types of implant-abutment connections and/or geometries measuring the torque values before and after the leakage tests. MATERIALS AND METHODS. Three different abutment types (Intenal hex titanium, internal hex zirconium, morse tapered titanium) with different geometries were connected to its own implant fixture. All the abutments were tightened with a standard torque value then the composition was connected to the modified fluid filtration system. After the measurements of leakage removal torque values were re-measured. Kruskal-wallis test was performed for non-parametric and one-way ANOVA was performed for parametric data. The correlation was evaluated using Spearman Correlation Test (${\alpha}=0.05$). RESULTS. Significantly higher microleakage was found at the connection of implant-internal hex zirconium abutment. Observed mean torque value loss was also significantly higher than other connection geometries. Spearman tests revealed a significant correlation between microleakage and screw loosening. CONCLUSION. Microleakage may provoke screw loosening. Removing torque values rationally decrease with the increase of microleakage.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.662-670
• /
• 2005

Statement of problem: Little is known about the effect of abutment preparation procedure on do-torque values in different implant platform and the relationship of final do-torque values with different implant platform size. Purpose: This study evaluated the effect of abutment preparation procedure on do-torque values in different implant platform and the relationship of final do-torque values with different implant platform size. Material and method: Six ITI implants (2 narrow-neck implants, 2 regular-neck implants, 2 wide-neck implants) and six Branemark implants (2 narrow platforms, 2 regular platforms, 2 wide platforms) were embedded in each acrylic resin block with epoxy resin. Eighteen $synOcta^(R)$ abutments (6 narrow-neck implant-abutments, 6 regular-neck implant-abutments, 6 wide-neck implant-abutments) and eighteen esthetic abutments (6 narrow platform-abutments, 6 regular platform-abutments, 6 wide platform-abutments) were tightened to each implant with digital torque gauge. Initial do-torque values were measured using digital torque gauge. After preparation of abutments, Final do-torque values were measured with digital torque gauge. Results and conclusion: 1. Screws loosening or abutments motion were not detected in all experimental group, but some scratches of implant-abutment joints were detected in all group 2. Reduction ratios of final do-torque values were greater than initial do-torque values in all measured group, except in narrow-neck implant-abutment group (p<0.05). 3. Reduction ratios of final do-torque values in wide-neck implant-abutment group were greater than regular-neck implant-abutment group (p<0.01). 4. The greatest standard deviation value was detected in wide platform group in both implant systems.

• 한국강구조학회 논문집
• /
• 제20권3호
• /
• pp.399-407
• /
• 2008

건축공사 표준시방서에서 규정하는 TS고력볼트는 KS B 2819에 따라 토크관리법에 의한 체결한다. TS고력볼트는 핀 테일이 파단되면 적정축력이 도입되는 것으로 알려져 있지만, 실제로는 온도조건에 따라 토크계수가 변하고 도입축력도 설계기준에 미치지 못하는 경우가 발생한다. 본 논문에서는 현장 온도조건이 볼트의 토크계수 및 도입축력의 영향을 평가하기 위해 ${-10^{\circ}C{\sim}50^{\circ}C}$ 범위에서 3 종류의 고력 볼트에 대해 도입축력, 토크계수, 너트회전각을 실험적으로 비교 분석하였다. 실험결과 TS고력볼트의 경우 핀 테일이 파단될 때 모든 온도조건에서 설계볼트장력과 표준볼트장력을 상회하는 도입축력을 나타냈으며 ${-10^{\circ}C}$에서 ${50^{\circ}C}$까지 온도 상승함에 따라 핀 테일 파단시점의 볼트에 도입되는 평균축력은 20kN 증가되었다. 아연피막 처리한 일반육각형 고력볼트의 경우, $0^{\circ}C$, $20^{\circ}C$, $50^{\circ}C$조건, 토크계수 0.13과 토크 ${462N{\cdot}m} $에서 표준볼트축력을 상회하였지만, 도입축력의 일정한 경향을 찾을 수 없었으며 온도변수 별 평균 도입축력 차는 최대 50kN이었다. 일반 육각고력볼트의 경우, 온도상승에 따라 평균 도입축력도 상승되는 추세였으며 토크 ${462N{\cdot}m} $ 일때 온도변수별 볼트의 도입축력은 최대 33kN 차이를 보였다. 또한, TS볼트를 제외한 육각볼트 종류 군에 대해서는 너트회전각 ${90^{\circ}}$ 경우의 도입축력은 설계볼트장력에 미치지 못했다. 따라서, 기존 너트회전각 ${120^{\circ}{\pm}30^{\circ}}$의 하한치 ${-30^{\circ}}$에 대한 재평가를 고려해 볼 필요가 있다.