• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.311-317
• /
• 2005

NC controller parameters are fixed when the controller is combined with a machine. However, the characteristics of controller could be changed as it has being used by the machine or other environmental conditions. Ultimately, it results in tool positioning accuracy changing. The loading torque in servo motor also influences on the positioning accuracy. This study focus on a measuring and analysing method for verifying the angular positioning accuracy of NC servo motor. We used a high resolution A/D converter for acquiring analogue signal of rotary encoder in servo motor. Generating tool path by the combination of axial movements (X,Y,Z) is compared with the encoder signals with the servo motor torque. The current variation signal is also read from the servo motor power using a hall sensor and converted to the motor torque. The method of analysing proposed in this study will be used for determining the gains (tuning) of parameter in NC controller, when the controller is set up at a machine initially or the controller condition is changed during the work.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.66-70
• /
• 1994

The actuator saturation defects the countour control performance of mechatronics servo systems. In this paper, trajectory generation of contour control of the mechatronics servo system is developed taking into account of the constraints of the torque in the system. By using the generated trajectory, the torque constraint and assigned working accuracy are satisfied and the accurate contour control performance is achieved.

• Journal of Biosystems Engineering
• /
• 제16권1호
• /
• pp.1-8
• /
• 1991

This study was carried out to evaluate indirect methods of engine torque measurement. Three indirect methods based on throttle valve opening, exhaust gas temperature and inlet air pressure were compared. The indirect method based on throttle valve opening appeared to be the most satisfactory in terms of accuracy and response time. The discrepancies between the direct method and the indirect method based on throttle valve opening in measuring engine torque were 2% on t he average.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1824-1827
• /
• 1997

Majority of industrial robots are controlled by a simple joint servo control of joint actuators. In this type of control, the performance of control is influenced greatly by the joint interaction torques including Coriolis and centrifugal forces, which act as disturbance torques to the control system. As the speed of the robot increases, the effect of this disturbance torque increases, and makes the high speed-high precision control more difficult to achieve. In this paper, the joint disturbance torque of robots is analyzed. The joint disturbance torque is defined using the coefficients of dynamic equation of motion, and for the case of a 2DOF planar robot, the conditions for the maximum joint disturbance torques are identified, and the effect of link parameters and joint variables on the joint disturbance torque are examined. Then, a solutioin to the optimal path placement problem is proposed that minimizes the joint disturbance torque are examined. then, a solution to the optimal path placement problem is proposed that minimizes the joint disturbance torque during a straight line motion. the proposed method is illustrated using computer simulation. the proposed solution method cna be applied to the class of robots that are controlled by independent joint sevo control, which includes the vast majority of industrial robots. By minimizing the joint disturbacne torque during the motion, the simple joint servo controlled robot can move with improved path tracking accuracy at high speed.

• The Journal of Korean Physical Therapy
• /
• 제10권1호
• /
• pp.45-52
• /
• 1998

Since isokinetic concise can give an evaluation of muscle strength with great accuracy and objectively, it is widely used as the one of the important methods for evaluation of muscle performance. The purpose of this investigation was to compare values uncorrected for gravity with values corrected for gravity and to determine the effect of making this correction on knee flexors and extensors at three speeds. This investigation measured values isokinetically at $60^{\circ}/sec,\;120^{\circ}/sec,\;and\;180^{\circ}/sec$ in 14 male and 17 fermale university students. The gravity effect torque(GET) is the torque resulting from the effect of gravity on the combined weight of the leg and dynamometer arm. The GET was added to the measured extensors peak torque and subtraced from the flexors peak torque to yield gravity corrected values. Failure to consider GET greatly underetimated extensors torque and overtestimated flexors torque. Physical therapists must remember the importance of making the gravity correction in patients with reduced torque output where the gravitational torque is a greater percentage of the measured torque to ascertain correctly the relative strength of antagonists inversely affected by gravity.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.469-478
• /
• 2015

In order to promote the application of switched reluctance machines (SRM) in electric vehicles (EVs), the braking torque closed-loop control of a SRM is proposed. A hysteresis current regulator with the soft chopping mode is employed to reduce the switching frequency and switching loss. A torque estimator is designed to estimate the braking torque online and to achieve braking torque feedback. A feed-forward plus saturation compensation torque regulator is designed to decrease the dynamic response time and to improve the steady-state accuracy of the braking torque. The turn-on and turn-off angles are optimized by a genetic algorithm (GA) to reduce the braking torque ripple and to improve the braking energy feedback efficiency. Finally, a simulation model and an experimental platform are built. The simulation and experimental results demonstrate the correctness of the proposed control strategy.

• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.438-446
• /
• 2009

The performance of direct torque controlled (DTC) interior permanent magnet (IPM) machines is poor at low speeds due to a few reasons, namely limited accuracy of stator voltage acquisition and the presence of offset and drift components in the acquired signals. Due to factors such as forward voltage drop across switching devices in the three phase inverter and dead-time of the devices, the voltage across the machine terminals differ from the reference voltage vector used to estimate stator flux and electromagnetic torque. This can lead to instability of the IPM drive during low speed operation. Compensation schemes for forward voltage drops and dead-time are proposed and implemented in real-time control, resulting in improved performance of the space vector modulated DTC IPM drive, especially at low speeds. No additional hardware is required for these compensators.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.319-322
• /
• 1997

In vector control technique, stator currents of an induction motor are transformed to equivalent d-q currents in reference frame consist of d and q axis, each of which is coincide with flux and torque direction respectively. In this paper, the new algorithm is suggested where the stator current through an induction motor torque is monitored by using a vector control method where an additional equipment is not need. The G-programming is used to apply the suggested algorithm in the experiment and this is applied to an actual system to monitor the torque value of an induction motor on real time. To solve the vibration trouble of estimated torque caused from an unbalanced real rotating speed of an induction motor and measured rotating speed by suggesting the reconstructed in a method based on measurement current signal. This produced system testifies an accuracy of an induction motor through the experiment by comparing the reference value of the control method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.129-131
• /
• 1994

Rectangular type hybrid step motor is designed to generate thirty percents higher torque than existing step motors. The torque for the motor is generated by the electromagnetic force at the air gap between the stator and rotor. The generating torque is proportioned to the rotor volume, i. e. rotor diameter. The main idea in this study is that the diameter of rotor is increased to generate more torque for the same overall motor size. This motors are manufactured by varying the shape of the teeth width of the stator and rotor. The optimum shape of the teeth is selected from the standpoint as smaller step angular accuracy.

• 로봇학회논문지
• /
• 제19권3호
• /
• pp.266-273
• /
• 2024

With the rising interaction between robots and humans, detecting collisions has become increasingly vital for ensuring safety. In this paper, we propose a novel approach for detecting collisions without using force torque sensors or tactile sensors, utilizing a Transformer-based neural network architecture. The proposed collision detection approach comprises a torque estimator network that predicts the joint torque in a free-motion state using Synchronous time-step encoding, and a collision discriminator network that predicts collisions by leveraging the difference between estimated and actual torques. The collision discriminator finally creates a binary tensor that predicts collisions frame by frame. In simulations, the proposed network exhibited enhanced collision detection performance relative to the other kinds of networks both in terms of prediction speed and accuracy. This underscores the benefits of using Transformer networks for collision detection tasks, where rapid decision-making is essential.