• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.89-98
• /
• 2019

This paper analyzes the input side performance of a conventional three-phase to single-phase matrix converter (3-1MC). It also presents the input-side waveform quality under this topology. The suppression of low-frequency input current harmonics is studied using the 3-1MC plus capacitance compensation unit. The constraint between the modulation function of the output and compensation sides is analyzed, and the relations among the voltage utilization ratio and the output compensation capacitance, filter capacitors and other system parameters are deduced. For a 3-1MC without large-capacity energy storage, the system performance is susceptible to input voltage imbalance. This paper decouples the inner current of the 3-1MC using a Lyapunov function in the input positive and negative sequence bi-coordinate axes. Meanwhile, the outer loop adopts a voltage-weighted synthesis of the output and compensation sides as a cascade of control objects. Experiments show that this strategy suppresses the low-frequency input current harmonics caused by input voltage imbalance, and ensures that the system maintains good static and dynamic performances under input-unbalanced conditions. At the same time, the parameter selection and debugging methods are simple.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.102-103
• /
• 2006

An important challenge in polymer-based advanced materials aimed at the fabrication of individualized functional molecular objects exhibiting specific and well-defined properties. The strategy developed in our group involves the construction of single giant highly branched macromolecules with controlled architecture and topology. Our presentation will be focused on the design of a series of comb copolymers with (a) PS-PI diblock branches, (b) randomly distributed PS and PI branches and janus type PS-comb-b-PI-comb diblocks. Their synthesis and a study of their behavior in solution and in bulk will be described.

• ETRI Journal
• /
• v.39 no.1
• /
• pp.1-12
• /
• 2017

In this paper, we present a new approach for the progressive compression of three-dimensional (3D) mesh geometry using redundant frame dictionaries and sparse approximation techniques. We construct the proposed frames from redundant linear combinations of the eigenvectors of a combinatorial mesh Laplacian matrix. We achieve a sparse synthesis of the mesh geometry by selecting atoms from a frame using matching pursuit. Experimental results show that the resulting rate-distortion performance compares favorably with other progressive mesh compression algorithms in the same category, even when a very simple, sub-optimal encoding strategy is used for the transmitted data. The proposed frames also have the desirable property of being able to be applied directly to a manifold mesh having arbitrary topology and connectivity types; thus, no initial remeshing is required and the original mesh connectivity is preserved.

• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.125-131
• /
• 2010

Switched-resonator converters are a new family of soft switching DC-DC converters where the energy is transferred via a resonator. This paper introduces some isolated topologies of this family. The achieved advantages include, load independent soft-switching, self short-circuit protection, and optimization capability due to topology variety. Compared to conventional series-resonant converters, outstanding advantages such as a smaller fewer number of switches and diodes, a smaller transformer, and lower current stresses are achieved. A general synthesis scheme, functional topologies, and essential relations are included. Experimental results from a laboratory prototype confirm the presented theoretical analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.830-833
• /
• 2005

SDM(Structural Dynamics Modification) is to improve dynamic characteristics of a structure, more specifically of a base structure, by adding or deleting auxiliary(modifying) structures. In this paper, I will focus on the optimal layout of the stiffeners which are attached to the plate to maximize 1st natural frequency. Recently, a new topology method was proposed by yamazaki. He uses growing and branching tree model. I modified the growing and branching tree model. The method is designated modified tree model. To expand the layout of stiffeners, I will consider non-matching problem. The problem is solved by using local lagrange multiplier without the mesh regeneration. Moreover The CMS(Component mode synthesis) method is employed to reduce the computing time of eigen reanalysis using reduced componet models.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.142-148
• /
• 2022

In this paper, the weight reduction design of the yaw gearbox for wind turbine was performed through the finite element analysis method, and the stability was checked by performing the critical speed analysis. The weight reduction product can improve engine efficiency, save parts materials, and earn economic benefits. The yaw gearbox is lightweighted with the goal of achieving a safety rate of 1.3 or higher for wind turbine as indicated by IEC61400-1. In order to reduce the weight of the carrier, a topology optimization method was performed. The safety factor was verified by performing finite element analysis on the carrier. In addition, the housing and carrier were modeled using the finite element method, and the gear train was modeled using MASTA. For the yaw gearbox, the housing and carrier FE model and the gear train model were connected by the partial structural synthesis method to perform the rotational vibration analysis. Vibration excitation sources are mass unbalance and gear mesh frrequemcy, and as a result of the critical speed analysis, it was found that there was no resonance within the operating speed range.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.1
• /
• pp.183-200
• /
• 2020

This paper presents an efficient interactive framework for perspective scene completion and editing tasks, which are available largely in the real world but rarely studied in the field of image completion. Considering that it is quite hard to extract perspective information from a single image, this work starts from a friendly and portable interactive platform to obtain the basic perspective data. Then, in order to make this interface less sensitive, easier and more flexible, a perspective-rectification based correction mechanism is proposed to iteratively update the locations of the initial points selected by users. At last, a complanate mesh is generated by the geometry calculations from these corrected initial positions. This mesh must approximate the perspective direction and the structure topology as much as possible so that the filling process can be conducted under the constraint of the perspective effects of the original image. Our experiments show the results with good qualities and performances, and also demonstrate the validity of our approaches by various perspective scenes and images.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.1965-1969
• /
• 2014

A new tetranuclear Mn(III) complex $[Mn^{III}{_4}(sae)_4({\mu}_3-O)({\mu}_{1,1}-N_3)(OH)(H_2O)_2]{\cdot}H_2O$ (1) ($H_2sae$ = 2-salicylideneamino-1-ethanol) has been synthesized by the reaction of $MnCl_2{\cdot}4H_2O$, $H_2sae$ and sodium azide in the mixed solvent of methanol, acetonitrile and water. The X-ray diffraction analysis shows that the four Mn(III) ions in complex 1 have a unique adamantine arrangement, whereas the coordination environment of each Mn(III) ions is different. Magnetic studies indicate that complex 1 manifests antiferromagnetic behaviors. The magnetic susceptibilities of complex 1 have been fitted by two magnetic models based on the suitable analysis of its magnetic structural topology.

• Journal of Mushroom
• /
• v.20 no.1
• /
• pp.7-12
• /
• 2022

The ascomycete fungus Cordyceps militaris infects lepidopteran insect pupae, forming characteristic fruiting bodies called "Dong Chung Ha Cho" in Korean. They have been used as medicines owing to their anti-allergic, anti-inflammatory, and immune-enhancing effects. This fungus can be grown on the geminated soybeans Rhynchosia nulubilis, which also contains several novel isoflavones. We performed a comparative transcriptome analysis to determine core gene sets or pathways contributing to biologically active products such as isoflavone. Initially, we sequenced 2-week-old fungal cultures on different soybean agar media, where different amounts of water agar were implemented to show different surface topology. We selected 830 upregulated and 188 downregulated genes by comparing linear models of the samples (two-fold change threshold). Gene ontology analysis identified that the "IMP biosynthesis" term was significantly found in the upregulated gene sets. The pathway is involved in the synthesis of cordycepin, the reference chemical for C. militaris. This finding in the transcriptome data is consistent with the previous observation: increased cordycepin concentrations in the C. militaris cultured on germinated soybean.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.390-397
• /
• 2020

To synthesize non-corrosive metallic gold colored α-Al₂O₃ nanoplate-TiO₂ core-shell pigments with controlled roughness, we systematically checked the morphological variation of the TiO₂ shell with the mole ratio of TiCl₄ and NaOH from 1 : 1 to 1 : 1.5, 1 : 2, 1 : 2.5, 1 : 3, 1 : 3.5, and 1 : 4. The more increased mole ratio of TiCl₄ and NaOH resulted in the smoother TiO₂ shell due to the promoted formation of anatase TiO₂ than that of the rutile one. By the heat-treatment of pigments at 500 ℃, we could improve the adhesiveness between TiO₂ shell and α-Al₂O₃ nanoplates without changing their topology and roughness. In addition, the α-Al₂O₃ nanoplate with the robust TiO₂ by heat-treatment exhibited comparable photo-stability against photo-catalytic degradation by UV exposure compared with the commercially available α-Al₂O₃/TiO₂ lustering pigment.