• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.4 s.334
• /
• pp.7-14
• /
• 2005

Earlier researches have typically concentrated on discovering IP network topology, which implies that the connectivity of all Ethernet devices is ignored. But automatic discovery of Physical topology Plays a crucial role in enhancing the manageability of modem Metro Ethernet mesh networks due to the benefits of Ethernet services, including: Ease of use, Cost Effectiveness and flexibility. Because of proprietary solutions targeting specific product families and related algorithm which depends on Layer 2 forwarding table information it is impossible to discover physical topology in the Ethernet mesh networks. To cope with these shortcomings, in this paper we propose a novel and practical algorithmic solution that can discover accurate physical topology in the Ethernet mesh networks. Our algorithm divides the Ethernet mesh networks into bridged networks and host networks and those bridges located in boundary are named edge bridges. Our algorithm uses the standard spanning tree protocol MIB information for the bridged networks and uses the standard Layer 2 forwarding table MIB information for the host networks. As using the standard MIB information to discover physical topology we can offer interoperability guarantee in the Ethernet mesh networks composed of the various vendors' products.

• KNOM Review
• /
• v.24 no.2
• /
• pp.48-55
• /
• 2021

Ethereum is an open software platform based on blockchain technology that enables the construction and distribution of distributed applications. Ethereum uses a fully distributed connection method in which all participating nodes participate in the network with equal authority and rights. Ethereum networks use Kademlia-based node discovery protocols to retrieve and store node information. Ethereum is striving to stabilize the entire network topology by implementing node discovery protocols, but systems for monitoring are insufficient. This paper develops a WireShark dissector that can receive packet information in the Ethereum node discovery process and provides network packet measurement results. It can be used as basic data for the research on network performance improvement and vulnerability by analyzing the Ethereum node discovery process.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.328-339
• /
• 2007

Conventional topology-based routing protocols are not suitable for inter-vehicular communication, where frequent route updates are necessary due to continuous and abrupt changes in network topology Position-based routing protocols are widely accepted to better serve their purpose in such a scenario as they do not require path discovery or maintenance. However they have to deal with the overhead of the location service and inaccurate position information. This paper proposes the MMFP (Multi-hop MAC Forwarding Protocol) for inter-vehicle communication that relies on reachability information collected from received packets in making a forwarding decision without path discovery. The MMFP is designed as an extension to the IEEE 802.11 MAC layer to ensure accuracy in its time-critical operations. This paper also presents some simulation results that demonstrate the superior performance of the MMFP over AODV in a realistic inter-vehicular communication.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.266-274
• /
• 2003

One of the major issues in current on-demand routing protocols for ad hoc networks is the high resource consumed by route discovery traffic. In these protocols, flooding is typically used by the source to broadcast a route request (RREQ) packet in search of a route to the destination. Such network-wide flooding potentially disturbs many nodes unnecessarily by querying more nodes than is actually necessary, leading to rapid exhaustion of valuable network resources such as wireless bandwidth and battery power. In this paper, a simple optimization technique for efficient route discovery is proposed. The technique proposed herein is location-based and can be used in conjunction with the existing Location-Aided Routing (LAR) scheme to further reduce the route discovery overhead. A unique feature of our technique not found in LAR and most other protocols is the selective use of unicast instead of broadcast for route request/query transmission made possible by a novel reuse of routing and location information. We refer to this new optimization as the UNIQUE (UNIcast QUEry) technique. This paper studies the efficacy of UNIQUE by applying it to the route discovery of the Dynamic Source Routing (DSR) protocol. In addition, a comparative study is made with a DSR protocol optimized with only LAR. The results show that UNIQUE could further reduce the overall routing overhead by as much as 58% under highly mobile conditions. With less congestion caused by routing traffic, the data packet delivery performance also improves in terms of end-to-end delay and the number of data packets successfully delivered to their destinations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.10
• /
• pp.859-876
• /
• 2012

Since the existing protocols separated mobility management part and routing protocol part in their design and used a flooding, they suffer from the high control overhead, thereby limiting performance. In this paper, we use a tree-based mobility management method and present a simple and efficient routing protocol that exploits the topology information which is built additionally through mobility management. Thus, the mobility management and the routing protocol closely cooperate to optimize control overhead. Furthermore, we use a progressive path discovery method to alleviate traffic congestion around IG and a unicast-based broadcast method to increase the reliability of message delivery and to judge link validity promptly. The proposed protocol reduces control overhead greatly and works in a stable manner even with the large number of nodes and high mobility. This was proven by comparing with the AODV protocol that employs the hybrid mobility management protocol.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.131-138
• /
• 2008

Mobile Ad hoc NETworks (MANETs) refer to autonomous networks in which wireless data communications are established between multiple nodes in a given coverage area without a base station or centralized administration. Because of node mobility and limited battery life, the network topology may changes frequently. Selecting the most reliable path during route discovery process is important to improve performance in ad hoc networks. In this paper, an enhanced routing protocol based on AODV(Ad hoc On-demand Distance Vector routing) by monitoring variation of receiving signal strength is proposed. New metric function that consists of node mobility and hops of path is used for routing decision. For preventing route failure by node movement during data transmission, a new route maintenance named as LRC (Local Route Change) is presented. If the node movement is detected, the routing agent switches path to its neighbor node in LRC. Simulation results show that the performance of the proposed routing scheme is superior to previous AODY protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1665-1671
• /
• 2007

Mobile Ad hoc Networks (MANETs) refer to autonomous networks in which wireless data communications are established between multiple nodes in a given coverage area without a base station or centralized administration. Because of node mobility and limited battery life, the network topology may changes frequently. Selecting the most reliable path during route discovery process is important to improve performance in ad-hoc networks. In this study, we proposed an enhanced routing protocol based on AODV by monitoring variation of receiving signal strength. New metric function that consists of node mobility and hops of path is used for routing decision. From extensive experiments by using NS-2, The performance of the proposed routing scheme has been imp개ved by comparison to AODV protocol.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.4
• /
• pp.32-39
• /
• 2006

MANET is a dynamically reconfigurable wireless network with no fixed infrastructure (base station, or AP). In order to provide the data service in MANET, we need an efficient routing protocol to deliver the data to the wanted destination at a mobile node. A method of routing protocols called reactive routing protocol has recently got attention because of their low routing overhead. But a method of flooding broadcasts the packet to all of its neighbors. For this reason, each of the node has high routing overhead to route and keep path discovery. Accordingly in this paper, I propose an adaptive flooding scheme using N-hop look-ahead in MANET, md an optimal N value of doing flooding the packet to limited area. Because of being basically ignorant about topological changes, each of the node did not spontaneously cope with path alteration. But an efficient flooding scheme applying N-hop look-ahead is more resilient to topology changes than traditional algorithms. And also with this efficient flooding scheme, the simulation results demonstrate excellent reduction of routing overhead.

• The KIPS Transactions:PartC
• /
• v.15C no.3
• /
• pp.213-220
• /
• 2008

A MANET is an autonomous, infrastructureless system that consists of mobile nodes. In MANET, on-demand routing protocols are usually used because network topology changes frequently. The current approach in case of broken routes is to flag an error and re-initiate route discovery either at the source or at the intermediate node. Repairing these broken links is a costly affair in terms of routing overhead and delay involved. Therefore, this paper propose a NAODV(Neighbor-aware AODV) protocol that stands on the basis of an AODV. It sets up the route rapidly if it operates for setting the route directly by using sequence number of neighbor nodes without re-search the route when the route to destination node is broken. Also, it reduces loss of packets. We use NS-2 for the computer simulation and validate that the proposed scheme is better than general AODV in terms of packet delivery ratio and average end-to-end delay. Also, when the proposed protocol is applied to the large ad-hoc network with multiple nodes, the performance is more efficient.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.3
• /
• pp.73-78
• /
• 2019

Due to frequent topology changes in wireless networks, inter-node link disconnection and path re-establishment occur, causing problems such as overloading control messages in the network. In this paper, to solve the problems such as link disconnection and control message overload, we perform path setup in three steps of the neighbor node discovery process, the route discovery process, and the route management process in the wireless network environment. The link stability value is calculated using the information of the routing table. Then, when the zone master monitors the calculated link value and becomes less than the threshold value, it predicts the link disconnection and performs the path reset to the corresponding transmitting and receiving node. The proposed scheme shows a performance improvement over the existing OLSR protocol in terms of data throughput, average path setup time, and data throughput depending on the speed of the mobile node as the number of mobile nodes changes.