• 한국환경과학회지
• /
• 제15권6호
• /
• pp.527-532
• /
• 2006

The purpose of this study is to clarify the characteristic of urban heat island intensity in urban area formed at a basin. Thermal environments for basin-type cities are influenced by significant topographic relief winds. In this study, we analyzed the diurnal variations of the heat island intensity according to meteorological condition and season using AWS(Automatic Weather observation System) data in Daegu Metropolitan area for 1 year(3/April, 2003 $\sim$ 2/April, 2004). In this study, we defined the urban heat island intensity as the air temperature difference between two points, the downtown and the suburban area. The suburban area is located at valley mouth around the western tip of Daegu. The results are summarized as follows; 1. The maximum heat island intensity was recorded at early morning under the meteorological conditions, calm and clear 2. The heat island intensity was strong in the order of winter, fall, spring and summer. 3. The heat island intensity came out minus values in the afternoon. This phenomenon is known as a com mon for basin-type cities. 4. The heat island intensity was twice or more in clear and calm than not so.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.49-56
• /
• 2016

In Korea, there exist many mountains, and sudden storms occur during the summer season. When severe rainstorm events occur in steep slope topography, risk of debris flow is increased. Once debris flow occurs in urban area, it may cause casualties and physical damages due to rapid debris flow velocity along a steep slope. Accordingly, preventing method of sediment-related disaster for demage mitigation are essential. Recently, various studies on debris flow have been conducted. However, the prediction of the physical propagation of debris flow along the steep slope was not thoroughly investigated. Debris flow is characterized by various factors such as topography, properties of debris flow, amount of debris flow. In the study the numerical simulation was focused on the topographic factor. Fundamental analysis of the risk area was implemented with emphasis on the propagation length, thickness, and the development of maximum velocity. The proposed results and the methodology of estimating the structural vulnerability would be helpful in predicting the behavior and the risk assessment of debris flow in urban area. These results will be able to estimate the vulnerability of urban areas affected the most damage by debris flow.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.100-106
• /
• 2014

It is well known that fatigue failures occur on welded structures in industrial application due to repetitive load force. In order to decrease the incidence of fatigue failure, we analyzed the mechanical properties based on structural aspects in rolled steel(SS 400) welded onto stainless steel (STS 304) by the MIG welding method as well as the structure of rolled steel welded onto itself. We compared the hardness, tensile and fatigue properties with two types of samples which had no defects on the welding parts as observed by X-ray topographic analysis. It was found that the tensile and fatigue strength levels of SS 400 welded onto STS 304 by the MIG welding method were higher than those of STS 304 welded onto itself.

• 한국환경과학회지
• /
• 제26권10호
• /
• pp.1111-1124
• /
• 2017

This study aimed to understand the distribution of vegetation in the eastern and western sides of the Baekdudaegan (ridge) dividing the Odaesan National Park, as influenced by its topography and climate. The actual vegetation, topography and climate for each side were used in the overlay analysis. The results of the analysis of actual vegetation showed a high distribution rate of Quercus mongolica forest on both the eastern and western sides. On the eastern side, the distribution rate of Pinus densiflora forest and P. densiflora-Q. variabilis forest was high, while the western side had a high distribution rate of deciduous broad-leaved tree forest and Abies hollophylla forest. A clear trend was identified for vegetation distribution with respect to elevation but not with respect to slope or aspect. The results of micro-landform analysis showed that the P. densiflora forests in the ridge and slope and the deciduous broad-leaved tree forest in the valley were respectively distributed with a high ratio. In terms of climate, the eastern side revealed an oceanic climate, with a relatively high average annual temperature, while the western side was characterized by relatively high average annual humidity and average annual precipitation. The distribution rate of P. densiflora forest was found to be high on the eastern side of the mountain range.

• 한국안전학회지
• /
• 제24권1호
• /
• pp.89-94
• /
• 2009

The purpose of this study is to estimate the critical flood discharge and flash flood trigger rainfall for alarm system providing for a flash flood in mountainous area. The flash flood need non-linear approaching method, because rainfall-runoff is nonlinear and it is difficult to explain the existing linear rainfall-runoff. Hydrological characteristics would be utilized to apply such as hydrologic modelling or basin management. This study was effectively estimated a topographic characteristic factor of basin using the GIS. Especially, decided stream order using GIS at stream order decision that is important for input variable of GCIUH. A flash floods defined as a flood which follows shortly after a heavy or excessive rainfall event, with a few hours. In this study, we gave a definition that a critical flood for alarm is the flood when valley depth judging dangerous depth is over 0.5m depth from the bottom of channel. Result that calculate threshold discharge to use GCIUH, at the Mureung valley basin, flash flood trigger rainfall was 16.34mm in the first 20minutes when the threshold discharge was $14.54m^3/sec$.

• 한국수자원학회논문집
• /
• 제39권1호
• /
• pp.69-77
• /
• 2006

포항시에 위치한 송도해안은 오랜 기간 동안 여러 가지 원인에 의하여 해안침식이 진행되었다. 송도해안의 해안침식 문제와 관련하여 논쟁의 이슈로 되어 있는 문제 중 하나는, 해안침식에 대한 주변 해안구조물의 영향 범위이다. 본 연구에서는, 이를 검토하기 위하여 송도해안의 침식특성과 관련된 기존자료 및 항공사진자료 등을 통하여 재분석하였다. 특히, 주변지역의 인위적인 해안개발 상황을 토대로 실험안을 구성한 후, 3차원 지형변동모델을 이용하여 송도해안의 해빈변형상황을 검토하였으며, 아울러, 이러한 다방면의 해석을 통해 얻어진 검토결과들을 토대로 대상해안의 침식이력특성을 파악하고자 하였다.

• 한국지리정보학회지
• /
• 제5권1호
• /
• pp.20-26
• /
• 2002

전국토의 65%가 산림지역인 우리 나라의 경우 1990년대에 들어와서 산불발생건수 및 피해면적이 지속적으로 증가하고 있다. 본 연구에서는 산불을 효율적으로 관리할 수 있도록 GIS(지리정보 시스템)를 이용하여 산불피해지역의 지형을 분석하였고, 기상자료와 임상자료를 포함하여 소형산불과 대형산불의 인자간 상호 비교 분석을 실시하였다. 그 결과 대형산불에 영향을 주는 인자는 사면장, 사면경사, 풍속, 수종, 수종연속성이 산불의 대형화와 관련이 있는 것으로 나타났다.

• 센서학회지
• /
• 제30권4호
• /
• pp.236-242
• /
• 2021

In this paper, we report the fabrication of the tip-on-gate of a field-effect-transistor (ToGoFET) probe using a standard complementary metal-oxide-semiconductor (CMOS) process and the performance evaluation of the fabricated probe. After the CMOS process, I-V characteristic measurement was performed on the reference MOSFET. We confirmed that the ToGoFET probe could be operated at a gate voltage of 0 V due to channel ion implantation. The transconductance at the operating point (Vg = 0 V, Vd = 2 V) was 360 ㎂/V. After the fabrication process was completed, calibration was performed using a pure metal sample. For sensitivity calibration, the relationship between the input voltage of the sample and the output current of the probe was determined and the result was consistent with the measurement result of the reference MOSFET. An oxide sample measurement was performed as an example of an application of the new ToGoFET probe. According to the measurement, the ToGoFET probe could spatially resolve a hundred nanometers with a height of a few nanometers in both the topographic image and the ToGoFET image.

• 한국항해항만학회지
• /
• 제28권3호
• /
• pp.269-276
• /
• 2004

매립지는 도심부 혹은 내륙지역과는 달리 독특한 지형적 자연환경 특성을 가지고 있으며 내륙지역에 비해 낫은 기온, 강한 바람, 과다한 일사조건, 해염을 포함한 습기라는 기후적 악조건을 가지고 있다. 따라서 워터프런트를 개발할 경우는 매립에 따른 기후환경 특성을 상세하게 파악하여 적합한 개발 및 체계적인 유지관리가 필요하다. 워터프런트의 지형적, 기후적 특성을 충분히 검토하지 않고 개발을 추진한 경우 기후환경의 악화와 더불어 시설의 하자발생 및 부정확한 설비용량 산정에 따른 에너지비용 및 유지관리비용의 상승이 초래될 수 있다. 본 연구에서는 현재 매립ㆍ개발이 진행되고 있는 부산 신항만지역의 환경친화적 에너지 수급계획을 위하여 신항만지역의 표준기상데이터를 작성하고, 이를 바탕으로 현재 계획되어 있는 상업ㆍ업무시설과 주거시설을 대상으로 동적 최대 열부하계산을 실시하여 신항만지역 배후도시의 설비용량 산정을 위한 기초자료를 제시하였다.

• 한국수자원학회논문집
• /
• 제37권11호
• /
• pp.897-913
• /
• 2004

지금까지 국내에서는 도시하수, 공장폐수 등의 점오염원에 국한하여 수질관리를 시행하여 부분적으로 밖에 효과를 얻지 못하였다. 따라서 오염원에 대한 최적관리를 위해서는 유역의 토지특성 및 토양 형태에 따른 비점오염원에 대한 관리가 매우 중요하다. 본 연구에서는 유역의 특성별로 발생하는 오염원을 산정하기 위해 분포형 모형을 적용하였으며, 상세한 유역특성 자료를 구축하기 위해 GIS 기법을 응용하였다. 본 연구에서는 분포형 수질관리모형으로 연속 강우 사상에 대해 유역에서 발생하는 유출량 및 첨두유량, 유사량, 비점오염 부하량 등을 산정할 수 있는 AnnAGNPS 모형을 적용하였고, 모형내의 부모듈을 이용하여 입력자료를 생성 및 가공하여 적용하였다. 대상유역은 팔당호 유역권에 포함되는 복하천 유역을 선정하였으며, 1999년과 2000년 호우기의 각각 2개의 강우 사상을 적용하였다. 우선 강우시 유역에서 발생하는 유출량을 모의하고, 이를 복하교 지점의 실측유량자료와 비교, 보정하여 모형의 입력 매개변수를 조정하였으며, 이후 토사발생량과 오염부하량을 모의하였다 토사발생량의 경우는 실측값이 미비하여 비교분석은 못하였으나, 오염부하량의 경우 환경부에서 측정한 수질농도 자료를 이용하여 비교, 분석값을 제시하였다.