• Korean Journal of Remote Sensing
• /
• v.20 no.3
• /
• pp.163-173
• /
• 2004

The objective of this study is to develop a method to generate micro-relief digital elevation model (DEM) data of the tidal mudflats using multi-temporal Landsat Thematic Mapper (TM) data. Field spectroscopy measurements showed that reflectance of the exposed mudflat, shallow turbid water, and normal coastal water varied by TM band wavelength. Two sets of DEM data of the inter-tidal mudflat area were generated by interpolating several waterlines extracted from multi-temporal TM data acquired at different sea levels. The waterline appearing in the near-infrared band was different from the one in the middle-infrared band. It was found that the waterline in TM band 4 image was the boundary between the shallow turbid water and normal coastal water and used as a second contour line having 50cm water depth in the study area. DEM data generated by using both TM bands 4 and 5 rendered more detailed topographic relief as compared to the one made by using TM band 5 alone.

• Journal of Korea Water Resources Association
• /
• v.40 no.4
• /
• pp.287-297
• /
• 2007

The procedures for identifying channel network are suggested by exploring the scaling property between the local slope and the contributing area, given that the area threshold criterion is an indispensable complement to the slope-area threshold criterion. Through the use of the above procedures and the field data, the basin slopes illustrate the trends of large scatters in space for the geomorphologic/topographic factors. According to the scaling regimes of them both the forms of landscape can be classified as topographic divergence and convergence. The presentation of the procedures proposed in this study is implemented in the case study on Seolma experimental catchment in Korea. As a result the dynamic behaviors of basin are confirmed, and thus the dynamics of channel head advance and channel network are shown to represent better than the method using the topographic chart manually.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.2
• /
• pp.1-17
• /
• 2020

This study evaluated a debris landform distribution potential area map in the southwest region of the Korean peninsula. A GIS spatial integration technique and logistic regression method were used to produce a distribution potential area map. Seven topographic and environmental factors were considered for analysis and 28 different data set were combined and used to get most effective results. Moreover, in an accuracy assessment, the extracted results of the Distribution Potential area were evaluated by conducting a cross-validation module. Block stream showed the highest accuracy in the combination No. 6, and that DEM (digital elevation model) and TWI (topographic wetness index) have relatively high influences on the production of the Block stream Distribution Potential area map. Talus showed the highest accuracy in the combination No. 13. We also found that slope, TWI and geology have relatively high influences on the production of the Talus Distribution Potential area map. In addition, fieldwork confirmed the accuracy of the input data that were used in this study, and the slope and geology were also similar. It was also determined that these input data were relatively accurate. In the case of angularity, the block stream was composed of sub-rounded and sub-angular systems and Talus showed differences according to the terrain formation. Although the results of the rebound strain measurement using a Schmidt's hammer did not shown any difference in topographic conditions, it is determined that the rebound strain results reflected the underlying geological setting.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.103-112
• /
• 2019

Extraction of region of interest for satellite image classification is one of the important techniques for efficient management of the national land space. However, recent studies on satellite image classification often depend on the information of the selected image in selecting the region of interest. This study propose an effective method of selecting the area of interest using the continuous digital topographic map constructed from high resolution images. The spatial information used in this research is based on the digital topographic map from 2013 to 2017 provided by the National Geographical Information Institute and the 2015 Sejong City land cover map provided by the Ministry of Environment. To verify the accuracy of the extracted area of interest, KOMPSAT-3A satellite images were used which taken on October 28, 2018 and July 7, 2018. The baseline samples for 2015 were extracted using the unchanged area of the continuous digital topographic map for 2013-2015 and the land cover map for 2015, and also extracted the baseline samples in 2018 using the unchanged area of the continuous digital topographic map for 2015-2017 and the land cover map for 2015. The redundant areas that occurred when merging continuous digital topographic maps and land cover maps were removed to prevent confusion of data. Finally, the checkpoints are generated within the region of interest, and the accuracy of the region of interest extracted from the K3A satellite images and the error matrix in 2015 and 2018 is shown, and the accuracy is approximately 93% and 72%, respectively. The accuracy of the region of interest can be used as a region of interest, and the misclassified region can be used as a reference for change detection.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.194-204
• /
• 2007

The purpose of this paper was to propose a Topographic Position Index(TPI) method for predicting forest wetlands, and also to test the suitability of the predicted forest wetlands by comparing with the existing wetlands in Ulaju-gun and Gyengsangnam-do. A prediction of the spatial distribution of forest wetlands was accomplished by TPI grids from Digital Elevation Model(DEM), and the classification results of slope position and landform categories in study area using the TPI values. According to the results of predicting forest wetlands distribution by TPI method, the predicted area in case of less than $5^{\circ}$ flat slope criteria occupied 0.1%($1.38km^2$) of the total area, and 3.5%($37.1km^2$) of total area in below $10^{\circ}$ slope criteria. According to the results of the suitability analysis by comparing the predicted area with the existing forest wetlands, the suitability value (0.066) of the predicted area with less than $10^{\circ}$ flat slope criteria was the highest, but the predicted area in case of less than $20^{\circ}$ had the lowest value(0.019).

• Korean Journal of Ecology and Environment
• /
• v.49 no.2
• /
• pp.142-146
• /
• 2016

The purpose of this study is to evaluate topographic characteristics revealed in the predicted distribution areas of Aporia crataegi, according to climate change. Towards this end, this study compared the differences of topographic factors, such as altitude, mountain slope and the aspect of slope, in the distribution areas with different potential inhabitation possibilities of the Aporia crataegi. The inhabitation possibilities of the Aporia crataegi were different, according to altitude and topographic slope, and the inhabitation possibility is judged to be affected more by the topographic conditions including altitude and mountain slope than by the aspect of slope. Especially, the inhabitation possibility of the Aporia crataegi was higher in the higher altitude area, as time goes on furthermore. The reason is that the current climate environment, which is suitable for the potential inhabitation of the Aporia crataegi, is forecast to be formed with an area with high altitude. Although the difference in the aspect of slope was not statistically significant according to inhabitation possibility, the reason why the inhabitation possibility of the Aporia crataegi varies in the mainly southeast slope is conjectured to be derived from the warmer heat environmental condition to grow from a larva into an imago. The result drawn in this study is expected to be utilized as basic data to establish a policy soundly preserving and managing the habitat of biospecies in consideration of climate change and topographic conditions in the natural ecosystem field by using the already built up various biological resources information.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.49-55
• /
• 2006

Nowadays, flood hazard maps have been generated to minimize the damages from the flooding. To generate such flood hazard maps, LiDAR data can be used as data source with higher data accuracy. LiDAR data, however, requires relatively higher cost and longer processing time. In this background, this study proposed DEM generation using NGIS digital topographic maps. For that, breaklines were processed to count directions of water flows. In addition, the river profile data, unique data source to represent real topography of the river area, were integrated to the breaklines to generate DEM. City of Kuri in Kyunggi Province was selected for this study and 1:1,000 and 1:5,000 topographic maps were integrated to process breaklines and river profile data were also linked to generate DEM. The generated DEM showed relatively lower vertical accuracy from mixing 1:1,000 and 1:5,000 topographic maps since 1:1,000 topographic maps were not available for some portion of the area. However, the DEM generated demonstrated reasonable accuracy and resolution for flood map generation as well as higher cost saving effects. On the contrary, for more efficient utilization of NGIS topographic maps, periodic map updating needs to be made including technical consideration in building breaklines and applying interpolation methods.

• Ocean and Polar Research
• /
• v.28 no.4
• /
• pp.467-473
• /
• 2006

The EM 120, a newly installed multibeam echo sounder on RM Onnuri, has several advantages over the previously installed SeaBeam 2000 in performance and thus data quality. The EM 120 system provides a bottom topographic map with high resolution by (1) increasing the number of beams, (2) increasing the across track swath range, (3) measuring the more accurate sound velocity within the water column, and (4) improving stabilization for pitching, rolling, and yawing of the ship. This study compares EM 120 and SeaBeam 2000 echo sounders in terms of the data quality from the same survey area in the Clarion-Clipperton Zone, NE Pacific. Our result shows that the EM 120 provides more precise topographic data than the SeaBeam 2000. Although overall trends of data, such as topographic direction and relief, are similar for both echo sounders, the water depths measured by the EM 120 are shallower than that of SeaBeam 2000 by 80 to 90 meters.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.379-386
• /
• 2007

In this paper, topographic factors over 3-dimensional hills were estimated through wind tunnel tests. Topographic models having five different slopes of $5.71^{\circ}, \;11.31^{\circ},\;16.70^{\circ},\;21.80^{\circ}$, and $26.57^{\circ}$ which were based on Korean Building Code(KBC(2005), were made for wind tunnel tests. From the result of wind tunnel tests, topographic factors over 3-dimensional hills were obtained at various locations, and the ranges of topographic effects were decided. The ranges of topographic effects was whole area of the hills in the horizontal ranges and heights of 3.5 times of the hills in the vortical ranges. Topographic effects was large at the top of hills, and wind velocity was increased 57% over hill of $5.71^{\circ}$, 75% over hill of $11.31^{\circ}$, 79% over hill of $16.70^{\circ}$, 81% over hill of $21.80^{\circ}$, and 61% over hill of $26.57^{\circ}$. Wind velocity was bigger over surface of across-wind direction of hills than one over surface of wind direction of hills, and wind velocity was increased $10{\sim}30%$ at locations of across-wind direction.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.537-540
• /
• 2004

Space-borne multi-sensor data could provide fire scar and bum severity mapping. This paper will present detail mapping of burnt areas in Cheongyange Yesan of Korea with ETM+ image. Burn severity map based on ETM+ image was found to be affected by strong topographic illumination effects in mountainous forest area. Topographic effect is a factor which causes errors in classification of high spatial resolution image like IKONOS image. Minnaert constants J( in each band of ETM+ image is derived for reduction of mountainous terrain effects. Finally, this paper computes quantitative analysis of forest fire damage by each forest types.