• Journal of the Korean Geotechnical Society
• /
• v.36 no.6
• /
• pp.5-15
• /
• 2020

This study deals with the use of porewater pressure transducers to evaluate the stability of a fill dam through the correlation between the porewater pressure and water level. As a result of performing principal component analysis on a total of eight porewater pressure transducers installed in the fill dam, they were distributed into three groups. It was found to be distributed as internal, external, and top based on seepage line in the dam body. The correlation coefficient between porewater pressures and water level in group A located inside the seepage line indicated 0.94 to 1.00 and they are showing a strong positive linear relationships. It indicates that maintenance of the dam is required by the porewater pressure transducers of the group A. In addition, a linear regression analysis was performed with the determination coefficients of the group A of 0.89 to 0.99. It was found that the pore water pressure can be predicted and the stability of the dam can be evaluated by comparing it with the currently measured values when the water level is fixed as an explanatory variable.

• Journal of Korean Philosophical Society
• /
• v.123
• /
• pp.379-407
• /
• 2012

The main purpose of this paper is to make a case for the availability of pragmatist ethics by showing the differences between utilitarianism and pragmatism. In this paper, drawing on Dewey's view, I show that Bentham and Mill were doomed to failure because they both regarded moral conduct not as a process but as a fixed act, the remarkable differences between their views notwithstanding. Besides, I also show that pragmatism distinguishes itself from utilitarianism by its focus on the aspect of the amendment of a conduct rather than its attainment. Pragmatist ethics works on the assumption that moral conduct arises only in conscious experience. What pragmatists mean by consciousness is not an ability just given to haman, but a function emerging from the human interaction with his environment. Therefore, morality is extended from and restricted by experience, because it is grounded in concrete experience, but not in the transcendental nor a priori realm. Since pragmatism suggests the possibility of "ethics without principles" in that it works through the way which successfully rejects the traditional absolutist ethics, while avoiding the downslide to a nihilistic form of skepticism. Thus, it may serve as a third view that overcomes a seriously divergent situation of the current ethical arguments. In other words, starting from the very nature of experience, pragmatist ethics offers a 'bottom-up' ethics, instead of a 'top-down' one. This reconstructive reading of pragmatism away from utilitarianism is expected to offer a more comprehensive account of our moral experience in the pluralistic world of diverged values.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.272-281
• /
• 2020

Agenesis of permanent tooth in adolescent patients can be treated either by orthodontic treatment for space closure or by maintaining the space until implant restoration can be carried out in adult. However, gradual atrophy of alveolar bone width makes it difficult to restore the prosthesis in the future or may cause unaesthetic results. Therefore, maintaining of not only the missing space but also the alveolar bone width should be considered. This case is a treatment whereby a temporary replacement of missing 2 mandibular incisors in adolescent patient was carried out using 2 temporary anchorage devices (TADs). Two TADs were placed horizontally 2 - 3 mm below the top of alveolar ridge, and fixed with artificial teeth by stainless steel wires extended. During the 2 year follow-up, neither gingival inflammation nor loss of the TADs have occurred. In the radiographic evaluation, the growth of the adjacent alveolar bone was not inhibited, and the width of the alveolar bone was maintained.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.68-76
• /
• 2021

Storage racks have suffered huge losses due to earthquakes, but related research and regulations are relatively insufficient non-structural elements compared to the structural elements. In this study, we tried to experimentally analyze the behavioral characteristics of storage racks due to external force according to the fixing conditions of the column-foundations connection of storage racks. In general, the column-foundations connection of storage racks is installed according to the user's convenience without installation standards and regulations. For this reason, this study conducted a behavior analysis test on four full-scale storage racks with the condition of column-foundations connection of four typical storage racks. The behavior characteristics analysis test was performed by two-direction of the shake table with El-Centro seismic wave. To confirm the behavior characteristics according to the magnitude of the seismic load, 50% ~ 150% of the seismic waves were increased by 50% for each test. In addition, a resonance search test was conducted to confirm the natural frequency of each storage racks foundations fixing condition. Among the data obtained through the test, the displacement of the top layer and the permanent displacement after the test were compared for each condition to analyze the behavior characteristics of the column-foundations fixed conditions of the storage racks. As a result, the change of natural frequency was small in storage racks due to the change of the conditions of the foundations, and the behavior characteristics were changed due to the difference of the restoring force due to the change of the storage racks foundations condition rather than the influence of the natural frequency of the input load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.116-122
• /
• 2021

This study quantitatively evaluated the performance improvement of a circular reinforced concrete pier under dynamic load with strengthening using a steel plate. Various three-dimensional elements were applied using the finite element program ABAQUS. The analytical parameters included the ratios of the steel cover length to the pier's total height and the ratios of the steel cover thickness to the pier diameter for inelastic-nonlinear analysis. The lower part of the pier had fixed boundary conditions, and lateral repetitive loads were applied at the top of the pier. The pier was investigated to evaluate the dynamic performance based on the load-displacement curve, stress-strain curve, ductility, energy absorption capability, and energy ratio. The yield and ultimate loads of piers with steel covers increased by 3.76 times, and the energy absorption capability increased by 4 times due to the confinement effects caused by the steel plate. A plastic hinge part of the column with a steel plate improved the ductility, and the thicker the steel plate was, the greater the energy absorption capacity. This study shows that the reinforced pier should be improved in terms of the seismic performance.

• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.273-282
• /
• 2021

Nursing home plays a role in providing elderly care in the context of China's rapid population aging, but little understanding of the efficiency of the nursing homes. In this paper, we investigated the efficiency in nursing homes using Data Envelopment Analysis (DEA) and Malmquist index (MPI) for the modeling of the number of nursing home beds, fixed assets, and medical personnel as input variables, and the number of elderly people of self-care, the number of elderly people of partial self-care, the number of bed-ridden elderly people and the income of nursing homes as output variables. Stratification analysis showed that the top two provinces in the DEA-CCR yield were Beijing and Shanghai in the five-year survey period. Four provinces (Beijing, Jiangsu, Shandong, and Shanghai) scored 1.00 in terms of DEA-BCC yield. The MPI analysis showed that Hainan ranked the highest five-year average in the included provinces. In terms of resource utilization, internal management, operation scale, and other aspects, the nursing homes in the provinces with high-efficiency evaluation results show high efficiency and technological progress, whereas the areas with low-efficiency evaluation showed a feature of the improving technical efficiency.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.249-256
• /
• 2022

The implant prosthesis of anterior maxilla requires careful consideration in planning. In order to satisfy both esthetic and functional needs of a patient, fusion of intra-oral scan in Cone-beam computed tomography (CBCT) and facial scan can be considered. Bony structures and soft tissues captured in CBCT and occlusal surfaces of intra oral scan were incorporated into personal characteristics from facial scan. The patient had insufficient buccal bone on maxillary anterior area. The maxillary implants could not be placed on the most ideal position. However, the "top down" approach completed by computer-generated arranging of teeth in implant planning and surgery with surgical guide resulted in esthetically and functionally satisfying result regardless of the limitation. Careful diagnosis with digital technique and the usage of surgical guide resulted in successful surgery and esthetic restoration. The temporary fixed prostheses were designed, restored and evaluated. The patient was not satisfied with the first design of temporary prosthesis, which showed uneven space distribution between teeth due to the position of maxillary implant. The design was modified by changing proximal emergence contours and line angle to alter the perceived since of incisors. The patient was satisfied with the new design of provisional restoration. A digital occlusion analyzer (Arcus Digma II, KaVo, Leutkirch, Germany) was used to measure inherent condylar guidance and anterior guidance of a patient to provide a definitive prosthesis.

• Animal Bioscience
• /
• v.36 no.11
• /
• pp.1666-1684
• /
• 2023

Objective: Our objective was to examine the relationships of supplemental rumen-protected lysine (RPL) or lysine + methionine (RPLM) on lactational performance, plasma amino acids (AA) concentration, and nitrogen use efficiency of lactating dairy cows by using a meta-analysis approach. Methods: A total of 56 articles comprising 77 experiments with either RPL or RPLM supplementation were selected and analyzed using a mixed model methodology by considering the treatments and other potential covariates as fixed effects and different experiments as random effects. Results: In early lactating cows, milk yield was linearly increased by RPL (β₁ = 0.013; p<0.001) and RPLM (β₁ = 0.014; p<0.028) but 3.5% fat-corrected milk (FCM) and energy-corrected milk (ECM) (kg/d) was increased by only RPL. RPL and RPLM did not affect dry matter intake (DMI) but positively increased (p<0.05) dairy efficiency (Milk yield/DMI and ECM/DMI). As a percentage, milk fat, protein, and lactose were unchanged by RPL or RPLM but the yield of all components was increased (p<0.05) by feeding RPL while only milk protein was increased by feeding RPLM. Plasma Lys concentration was linearly increased (p<0.05) with increasing supplemental RPL while plasma Met increased (p<0.05) by RPLM supplementation. The increase in plasma Lys had a strong linear relationship (R² = 0.693 in the RPL dataset and R² = 0.769 in the RPLM dataset) on milk protein synthesis (g/d) during early lactation. Nitrogen metabolism parameters were not affected by feeding RPL or RPLM, either top-dress or when supplemented to deficient diets. Lactation performance did not differ between AA-deficient or AA-adequate diets in response to RPL or RPLM supplementation. Conclusion: RPL or RPLM showed a positive linear relationship on the lactational performance of dairy cows whereas greater improvement effects were observed during early lactation. Supplementing RPL or RPLM is recommended on deficient-AA diet but not on adequate-AA diet.

• Information Systems Review
• /
• v.20 no.1
• /
• pp.1-16
• /
• 2018

The development and generalization of the Internet increased the popularity of food delivery service applications in Korea. The food delivery market based on online-to-offline service is growing rapidly. This study compares the usability of Korean food delivery service application between that of Chinese food delivery service application. This study suggests improvement points for Korean food delivery service applications. To conduct this study, we explore the status of various food delivery service applications and conduct interviews and surveys based on the honeycomb model developed by Peter Morville. This study obtained the following results. First, all restaurants participating in the Korean food delivery service must be able to accept order through the application. Second, the shopping cart function must be able to accept order of all restaurants simultaneously. Third, when users look for menu recommendation, their purchase history and shopping cart functions should appear at the first page of the website. Users should be able to perceive the improved usability of the website using those functions. Fourth, when the search window is fixed on the top of each page, users should be able to find the information they need. Fifth, the application must allow users to find the exact location of the delivery person and the estimated delivery time. Finally, the restaurants'address should be disclosed and fast delivery time should be confirmed to enhance users'trust on the application. This study contributes to academia and industry by suggesting useful insight into food delivery service applications and improving the point of food delivery service application in Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.294-300
• /
• 2010

Purpose: The template-guided implant surgery offers several advantages over the traditional approach. The purpose of this study was to evaluate the accuracy of coordinate synchronization procedure with 5-axis milling machine for surgical template fabrication by means of reverse engineering through universal CAD software. Materials and methods: The study was performed on ten edentulous models with imbedded gutta percha stoppings which were hidden under silicon gingival form. The platform for synchordination was formed on the bottom side of models and these casts were imaged in Cone beam CT. Vectors of stoppings were extracted and transferred to those of planned implant on virtual planning software. Depth of milling process was set to the level of one half of stoppings and the coordinate of the data was synchronized to the model image. Synchronization of milling coordinate was done by the conversion process for the platform for the synchordination located on the bottom of the model. The models were fixed on the synchordination plate of 5-axis milling machine and drilling was done as the planned vector and depth based on the synchronized data with twist drill of the same diameter as GP stopping. For the 3D rendering and image merging, the impression tray was set on the conbeam CT and pre- and post- CT acquiring was done with the model fixed on the impression body. The accuracy analysis was done with Solidworks (Dassault systems, Concord, USA) by measuring vector of stopping’s top and bottom centers of experimental model through merging and reverse engineering the planned and post-drilling CT image. Correlations among the parameters were tested by means of Pearson correlation coefficient and calculated with SPSS (release 14.0, SPSS Inc. Chicago, USA) ($\alpha$ = 0.05). Results: Due to the declination, GP remnant on upper half of stoppings was observed for every drilled bores. The deviation between planned image and drilled bore that was reverse engineered was 0.31 (0.15 - 0.42) mm at the entrance, 0.36 (0.24 - 0.51) mm at the apex, and angular deviation was 1.62 (0.54 - 2.27)$^{\circ}$. There was positive correlation between the deviation at the entrance and that at the apex (Pearson Correlation Coefficient = 0.904, P = .013). Conclusion: The coordinate synchronization 5-axis milling procedure has adequate accuracy for the production of the guided surgical template.