• Journal of Integrative Natural Science
• /
• v.11 no.4
• /
• pp.197-203
• /
• 2018

Long Term Evolution-Advanced (LTE-A) is the next drive in the broadband mobile communication, which allows operators to improve networks performance and service capabilities. LTE-A targets the peak data rates of 1Gbps in the downlink and 500Mbps in the uplink. This requirement is only fulfilled by a transmission bandwidth of up to 100MHz. However the accessibility of such large part of the contiguous spectrum is uncommon in practice. Therefore LTE-A uses some new features on top of the existing LTE standards to provide very high data rate transmission. Some of the most significant features introduced in LTE-A are carrier aggregation, heterogeneous network enhancement, coordinated multipoint transmission and reception, enhanced multiple input and multiple output, and development relay nodes with universal frequency reuse. This review paper presents an overview of the above mentioned LTE-A key features and functionalities. Based on this review, in the conclusion we discuss the current technical challenges for future broadband mobile communication systems.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.3
• /
• pp.576-595
• /
• 2024

Bracelets have enjoyed extensive use among the Chinese since antiquity as decorative pieces credited with warding off evil forces and inviting auspicious fortune. This study aims to integrate traditional cultural elements, such as Yuan blue and white porcelain flower patterns, into modern design using 3D printing technology to create culturally inspired bracelets. To this end, bracelet designs from the top four museums on Taobao were examined. In addition, we analyzed online reviews of culturally themed bracelets using text mining and applying FEA criteria and found that Chinese consumers are easy to wear and sizable, enhance cultural pride, and drive the demand for artistically sophisticated bracelets. The research culminates in the development of a modular bracelet design inspired by flower motifs from blue and white ware of the Yuan dynasty, with an emphasis on iterative improvements based on reviewer feedback. The final design meets consumers' expressive and aesthetic needs while also maintaining cultural integrity and functionality. The aim of the study is to inspire pride in traditional culture, provide insights for fashion accessory industries, and promote the national image through the development of culturally inspired products.

• Asia pacific journal of information systems
• /
• v.29 no.3
• /
• pp.328-358
• /
• 2019

Business-to-Business electronic commerce websites are a common form of inter-organizational systems that span organizational boundaries and enables organizations to exchange information in a seamless fashion. To reap the desired benefits it is important that the website be used in the intended manner. The level and extent of use of a business-to-business website depends partly on the inclination to use the website by the users in the primary organization and in the user organizations independently and the combined inclination of the organizations together. This combined inclination is referred to as the System Inclination, with dominance playing a key role. Each organization has certain characteristics of its own and may differ significantly in their inclination to use. It is important to analyze the factors that determine this inclination to use, so that organizations can adopt appropriate management mechanisms to control it. This paper proposes a framework to explain the organizational factors and their influence on the inclination to use a website, based on study of four Indian buyer-supplier dyads. Inclination to use is found to be influenced by factors like top management support, website characteristics, adequate support mechanisms, user group orientation towards electronic commerce and basic IT drive among the employees, at both the primary and user organizations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.6 s.360
• /
• pp.8-18
• /
• 2007

In this paper, a 4bit cell way structure of PoRAM and the sensing method to drive this structure are researched. PoRAM has a different operation from existing SRAM and DRAM. The operation is that when certain voltage is applied between top electrode and bottom electrode of PoRAM device we can classify the cell state by measuring cell current which is made by changing resistance of the cell. In the decoder selected by new-addressing method in the cell array, the row decoder is selected "High" and the column decoder is selected "Low" then certain current will flow to the bit-line. Because this current is detect, in order to make large enough current, the voltage sense amplifier is used. In this case, usually, 1-stage differential amplifier using current mirror is used. Furthermore, the detected value at the cell is current, so a diode connected NMOSFET, that is, a device resistor is used at the input port of the differential amplifier to converter current into voltage. Using this differential amplifier, we can classify the cell states, erase mode is "Low" and write mode is "High", by comparing the input value, Vin, that is a product of current value multiplied by resistor value with a reference voltage, Vref.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.1
• /
• pp.41-62
• /
• 2013

In order to facilitate the R&D of SMEs and foster innovative SMEs, the Small and Medium Business Administration is funding the SMEs in the focused supporting industries which are selected by a primary consideration of the political conformity. The correlations among the distribution of engaged SMEs, the distribution of SMEs which applied the fund, and the distribution of SMEs funded in the industries are analysed, in order to realize the effectiveness of the top-down method for selecting the focused supporting industries. As a result, there was a large deviation of both the number of the engaged SMEs and the number of the applied SMEs in the each industry, which means that the selected industries did not accurately reflect the needs for the technology development of SMEs. In addition, the distribution of the applied SMEs was strongly depended on the distribution of the engaged SMEs, which shows the trend that SMEs are trying to make R&D plans in their current industry rather than following the political drive. Moreover, because the distribution of the funded SMEs is strongly correlated with that of the applied SMEs, one could know that the selected industries were neither fostered strategically nor evenly but the fund was distributed simply according to the distribution of the applied SMEs. In this study, in order to complement the limitations of the top-down method, the bottom-up method which primarily consider the needs for the technology development of SMEs was suggested. It is desirable to consider in the order of the needs and the capabilities of SMEs, the technological perspective and marketability of the industry, and the political importance in the bottom-up method, and it is expected that the method could be flexibly used in the planning of the various programs.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.557-566
• /
• 2009

This study was to investigate gender differences in muscle activities on tibialis anterior muscle, gastrocnemius and vastus medialis obliqus and outside and prime mover, antagonist and assistance mover during golf drive swing by electromyography. Ten healthy professional golfers (KPGA(n)=5, KLPGA(n)=5) volunteered in this experiment. All statistical analyses were performed using SPSS. Statistical differences were assess using t-test (p<.05). The conclusion of this study was as following. Muscle dislocation of differences, according to gender, was the highest in case of males in right side of gastrocnemius with the section from the address to the backswing of top and was the highest in case of females in tibialis anterior muscle. Results also show that prime mover was left side of low muscle in case of male with all the sections and situations and is right side low muscle in case of female. These results were significant differences. In case of males, it was though that primer mover was left side of tibialis anterior muscle with moving weight from backswing of top till the address section. In case of females, primer movers were right side of vastus medialis obliqus and tibialis anterior muscle with pushing action form the right knee to the left knee. Therefore, if they try to do the training be able to development right side of vastus medialis obliqus and tibialis anterior muscle in case of females and left side of vastus medialis obliqus and tibialis anterior muscle in case of males, it is consider that golfers' distance and direction will get better.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.509-518
• /
• 2023

In this paper, we designed a 4Kb poly-fuse OTP IP (Intellectual Property) required for analog circuit trimming and calibration. In order to reduce the BL resistance of the poly-fuse OTP cell, which consists of an NMOS select transistor and a poly-fuse link, the BL stacked metal 2 and metal 3. In order to reduce BL routing resistance, the 4Kb cells are divided into two sub-block cell arrays of 64 rows × 32 rows, with the BL drive circuit located between the two 2Kb sub-block cell arrays, which are split into top and bottom. On the other hand, in this paper, we propose a core circuit for an OTP cell that uses one poly-fuse link to one select transistor. In addition, in the early stages of OTP IP development, we proposed a data sensing circuit that considers the case where the resistance of the unprogrammed poly-fuse can be up to 5kΩ. It also reduces the current flowing through an unprogrammed poly-fuse link in read mode to 138㎂ or less. The poly-fuse OTP cell size designed with DB HiTek 90nm CMOS process is 11.43㎛ × 2.88㎛ (=32.9184㎛2), and the 4Kb poly-fuse OTP IP size is 432.442㎛ × 524.6㎛ (=0.227mm²).

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.407-415
• /
• 2011

Damage to agricultural production caused by insects and diseases affects farming yields. The orchard sprayer is mainly used in the country to protect the fruit in a large area, with less effort and at minimum cost. The excellent performance of the air blast spray increases the fruit protection. Chemical application in orchards has been accomplished by the orchard sprayers with air assist nozzles and a axial fan in Korea. However, the orchard sprayers without ROPS resulted in severe injury or death when operators drive the sprayers improperly on hilly orchard or farming road. This study was to develop a ROPS for the orchard sprayers improving farmer's safety. In this study, the accident case was used in analysing the design and building TOP structure of the orchard sprayer. The maximum impact, body torsion frame structures including the driver's protection are also analysed for adherence to safety regulations. The ROPS safety regulations according to the strength test results were established.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.807-814
• /
• 2015

A control rod drive mechanism(CRDM) is a reactor regulating system, which inserts, withdraws or maintains a control rod containing a neutron absorbing material within a reactor core to control the reactivity of the core. The top-mounted CRDM for Jordan Research and Training Reactor(JRTR) with 5 MW power has been designed and fabricated based on the HANARO's experience through KAERI and DAEWOO consortium project. This paper describes the performance qualification test results to demonstrate the operability of a prototype and four production CRDMs during the reactor lifetime. The driving performance, the drop performance and the endurance tests for CRDM are carried out at a test rig simulating the actual reactor conditions. A vibration of internal components due to the coolant flow is also measured using a laser vibrometer. As a result, the CRDMs are driven having a good driving performance without a malfunction between command and output signals for the stepping motor. Also, the pure drop time and the impact acceleration are within 0.72 s and 4.2 g to meet the design requirements, and the vibrational displacement of control rod is measured as maximum $5.2{\mu}m$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.425-431
• /
• 2014

Most fields in highland areas are covered with rye or hairy vetch for conservation during a fallow. However, using cover crops needs an effort to sow, and this makes top soil more vulnerable to loss due to surface disturbances. The aims of this study were to develop an automatic seeding-regulator device using a low-price, extensive-use GPS sensors and a DC motors and to evaluate a working efficiency of it after adaptation to partial tillage machine for reducing seeding effort. The amount of runoff water and soil loss was evaluated with partial tillage and simultaneous-seeding after harvesting soybean, in 17% slope lysimeters. In results, the seeding amount with the machine speed was stable between $0.5{\sim}0.8m\;s^{-1}$ of working sections. The automatic control device of seeding-rate could be enough to solve the slip problems of power selecting supply system or five four-wheel drive device. In partial tillage and simultaneous seeding, runoff water was 11.6% ($1.8m^3ha^{-1}$) of the scatter-seeding control ($15.5m^3ha^{-1}$) and soil loss was 13.2% ($7kg\;ha^{-1}$) of the scatter-seeding control ($53kg\;ha^{-1}$). These results suggest that partial tillage and simultaneous-seeding methods are very effective in decreasing work effort and soil loss of sloped land.