• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.470-476
• /
• 2006

The objective of this in situ study was to evaluate the effects of whitening strip (Claren, LG Household & Health Care Ltd, 2.6% hydrogen peroxide) and gel (Opalescence, Ultradent, 10% carbamide peroxide) on microhardness of enamel in comparison with untreated control. Extracted twenty human upper incisors were disinfected, cleaned, and labial side of each incisor sectioned into 3 fragments by 2 ${\times}$ 2 mm size. After sectioning, labial sides of fragments were flattened and fixed to orthodontic bracket using flowable composite resin. Specimens prepared from each tooth were attached to the labial side of upper incisors of twenty volunteers one by one and treated by three different methods: (1) untreated control (2) treated with whitening strip for 14 days (3) treated with whitening gel for 14 days. Microhardness (Microhardness tester, Zwick) of each specimen was measured at the baseline of pre-treatment, immediate after bleaching treatment, 14 days after bleaching treatment and Knoop Hardness Number was determined. Microhardness changes of experimental groups were compared. The results show that tooth whitening strip and gel used in this study does not effect the microhardness of enamel during bleaching procedure.

• Journal of Oral Medicine and Pain
• /
• v.23 no.4
• /
• pp.457-473
• /
• 1998

This study was performed to investigate the morophological and positional correlation between the upper cervical vertebra, the oral structures and the pharyngeal tissues, and the correlation of these anatomical structures with dental features, such as teeth wear area nad tooth contact status, etc. Seventy patients with temporamandibular disorders and sixty three dental students without any signs and symptoms in head and neck region were selected for this study. All they had natural dentition without any fixed and removable protheses. Teeth wear area and arch width wre measured from the upper dental cast, tooth contact status were observed by T-Scan system$^\textregistered$ and four cephaloradiograpohs were taken from four head postures, namely, natural(NHP), forward(FHP), upward(UHP), and downward head postiure(DHP). 22 cephalometric items were measured on the films and the data were processed with SAS statistical program. The result of this study were as follows : 1. In normal group, angle of cervical vertebra tangent and of between hard and soft palate were broader in female subjects than those in male subjacets, but distance from subocciput to axis, size of soft palate, and pharyngeal space width were larger in male subjects. 2. In normal group with natural head posture, the items correlated each others from the three anatomical regions were distance between first nad second vertebra in posterior part, distance from the lingual surface of lower anterior teeth to anterior surface of soft palate, and distance from the hyoid bone to third vertebra. 3. Three set of items showed significant correlation each other in the four head postures in normal group. First set was the angle between hard and soft palate and the idstance from subocciput to posterior arch of first vertebra, second set was the distance between first and second vertebra in posterior part and the teeth wear area, third set was number and force of tooth contact and length of soft palate and distance from anterior tip of hyoid bone to mandibular plane.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.367-375
• /
• 1991

The clinical and radiographic features of 1,171 mesiodenses were studied with periapical radiograms and/or pantomograms in 942 persons visited the Department of Oral Radiology, School of Dentistry, Kyung Hee University during January 1980 to December 1989. The obrained results were as follows; 1. The incidence of mesiodens was higher in males (75.4%) than in females (24.6%). 2. In number of mesiodenses per individual, a single mesiodens was found to be 75.9%, 2-mesiodenses to be 23.8%, and 3-mesiodenses to be 0.2%. 3. In mesiodenses according to erupted and impacted status, the erupted mesiodens was found to be 16.5%, the impacted mesiodens in the interdental alveolar bone to be 66.6%, and in the region below root apex to be 16.9%. 4. In impacted mesiodenses according to direction of tooth crown, the inverted impaction was found to be 68.8%, the vertical impaction to be 15.1%, and the angulated impaction to be 16.1%. Among the impacted mesiodenses, a palatally located impaction was 87.5%, a middle 4.9%, and a labially 7.6%. 5. In mesiodenses according to shape of the tooth crown, a incisor-like type was found to be 1.6%, a canine-like type to be 6.8%, a conical type to be 79.2%, and a tuberculated type to e 12.4%. 6. In effect of mesiodens on adjacent tooth, non-specific influences were found to be 73.4%, crowding to be 0.3%, diastema to be 11.8%, rotation to be 5.7%, delayed eruption to be 3.8%, root resorption to be 2.6%, and dentigerous cyst to be 2.4%.

• Imaging Science in Dentistry
• /
• v.50 no.2
• /
• pp.141-151
• /
• 2020

Purpose: This study aimed to quantify the influence of tooth position within the field-of-view (FOV) on cone-beam computed tomography (CBCT) imaging artifacts' intensity when assessing teeth restored with various intracanal materials. Materials and Methods: Seventy single-rooted teeth were divided into 7 groups (10 teeth per group): NiCr post (NC), AgPd post (AP), metal core fiberglass post (MCFG), fiberglass post (FG), anatomical fiberglass post (AFG), fiberglass post cemented with core build-up cement (FGCo), and anatomical fiberglass post cemented with core build-up cement (AFGCo). All posts were cemented using a regular dual-curing resin cement (Allcem), except FGCo and AFGCo which were cemented with a core build-up dual-curing resin cement (AllcemCore). Each tooth was scanned on a CS9000 in 5 positions within the FOV: a central position, anterior horizontal peripheral, peripheral superior, peripheral inferior, and posterior horizontal peripheral position. Hyperdense, hypodense, remaining teeth areas and ROI areas were quantitatively analyzed using ImageJ software. Results: Posterior horizontal peripheral position increased the intensity of artifacts on FGCo and AFGCo post groups (P<0.05), and specifically the hypodense artifact intensity on FG and AFG post groups (P<0.05). NC and AP groups presented greater intensity of artifacts than any other post groups(P<0.05). Conclusion: Artifact intensity increases in the presence of high atomic number materials and when the object is not centered within the FOV. The impact of positioning within the FOV on artifact was greater for fiberglass posts cemented with core build-up dual-curing cement than for metal posts and fiberglass posts cemented with regular dual-curing cement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.11-19
• /
• 2007

There are have been reports that the distribution of electromyographical(EMG) activity is determined in a predictable manner by both the location and number of occlusal contacts. However, these reports placed an emphasis on whole dentition. Inclined plane contacts in the frontal plane are classified as A-, B- or C-types. Objectives: The aim of this study was to evaluate the relation between occlusal tooth contact patterns and EMG activity of masseter muscle during maximum voluntary clenching. Methods: Fifteen healthy human subjects(Mean age; 25.3 years) volunteered to participate in this study. Acrylic resin overlays were fabricated for upper 2nd premolars and 1st molars bilaterally, and offered 3 types(A-, B- and AB- type contact). EMG activity of the masseter muscles was recorded bilaterally during maximum voluntary clenching. Statistical analysis was performed using the one-way ANOVA. Results: The group with a A-type contact showed a statistically lower EMG activity of masseter muscle than that of natural group(p<0.05) and that of B- and AB- type groups(p<0.01) on both upper 2nd premolars and upper 1st molars. Conclusions: These results suggest that occlusal tooth contact patterns have an influence on EMG activity of masseter muscle during maximum voluntary clenching.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.3
• /
• pp.40-71
• /
• 1986

By developing a computer program for the systematic design of worm gears, the design formulae and tables of AGMA, JGMA, BS and DIN are analized and compared. The computer program can be used on micro-computers. According to the input data of the reduction ratio, the center distance. the driving torque and the material as design parameters, the program calculate the most efficient worm gear dimension. The variation of the design parameters and other empirical coefficients in case of resulting an inadequate design gear dimension can be easily modified throuth the way of interactive method between the user and the monitoring system of computer. A proposal of the standardization of worm gears was made in which a standard module according to the DIN 323 standard series number was applied. For the more exact and effective calculation of the stress concentration and the deformation of gear teeth, a computer program using the boundary element method is also developed. Even the strength of the special gear shape such as Niemann's "Cavex" gear can be calculated in a short CPU-time. The most effort of this study has been layed on the developing a computer program for the correction of a tooth profile and face width which is most important design factor for an exact and wide teeth contacts under loads, especially by great and wide gears. For this purpose were investigated the tooth stiffness, the mesh interferences and the kinematics and the dynamics of gear mesh. The deflection and the deformation of the gear shaft due to the loads acting on gear and shaft were aslo considered. Some examples have shown the sufficient good status of teeth contact in which the correction of the tooth profile and face width were accomplished due to the calculated results.d results.

• Korean Journal of Health Education and Promotion
• /
• v.26 no.1
• /
• pp.117-128
• /
• 2009

Objectives: The purpose of this study was to assess the effect of mothers education attainment on prevalence of dental caries among their preschool children. Methods: Data were obtained from the third 2006 Korea National Oral Health Survey. A total of 515 preschool children aged 2 to 7 years and their mothers were selected in this study. We used mother's education level as her socioeconomic position and controlled children's tooth brushing frequency, tooth brushing before bed, the frequency of eating snack, and the preventive dental visit. Whether children experienced dental caries or not and the number of decayed or filled or missing tooth surface they had were used as outcome variables. Results: The proportion of children affected with dental caries was 46.21%. The mother's education level affected children's caries significantly (p<0.05) and children whose mother attended less than high school had more possibility of having caries than children whose mother graduated from college or more (p<0.05). This effect was still significant and got larger(p<0.05), even after controlling children's dental health behavior. Conclusion: This study showed that mother's education level affected the prevalence of caries among their preschool children. In addition, this result indicated a need for more definite policy for children's dental health in lower socioeconomic class with general dental education.

• Journal of Periodontal and Implant Science
• /
• v.23 no.2
• /
• pp.352-357
• /
• 1993

The purpose of the present study was to evaluate and compare the periodontal conditions of distally extending cantilever bridges(CB) and removable patial dentures(RPD). 78 patients treated with removable partial dentures were divided into 2 groups; bilateral free-ending (type 1) and unilateral free-ending(type 2). 43 patients treated with distally extending cantilever bridges were divided into 4 groups according to position of missing molars and number of including abutment tooth (or teeth) (type 1-4). Prosthodontic status of the abutment teeth were assessed; overcontoured crown, overhanged margin, embrasure closure, and others. Their Periodonted status were assessed with Plaque Index Gingial Index(GI) Sulcus bleedy Index (SBI), Tooth mobility(TM) & Posher depth(PPD). 35.9% of RPD group and 38.1 of CB grouphad disconfort on mastication with prosthetics. 16.7% of RPD group and 6.1% of CB group showed on opposing sites. Overhanged margins were 58.3% for RPD group and 86.6% for GB group. 45.5% of RPD group and 72% of CB group had embrasure closure on the abutment teeth. 30.5% of GB group had oversized pontic. Gb group showed much higher clinical parameters than RPD groups, but statistically not significant. Type 2 of RPD group showed lower GI and SBI, but statistically not significant. Type 3 of CB group showed the highest GI and SBI and type 2 showed the highest tooth mobility, but there is no differences between the same type of groups. In conclusion, only minor differences in periodontal conditions were recorded in RPD and CB group.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.220-227
• /
• 2020

Purpose: This study aims to investigate the cusp variation pattern of the Korean mandibular second premolar and to determine the difference in tooth diameter and surface area using a virtual three-dimensional model. Methods: Dental casts from 69 students were scanned as a virtual dental models with a three-dimensional dental model scanner. Tooth diameter, absolute and relative individual areas, total crown area, the number of lingual cusps and central groove pattern were analyzed using RapidForm 2004. The Mann-Whitney U-test and the Kruskal-Wallis test were performed to verify sexual dimorphism, the difference in tooth diameter and surface according to the cusp variation pattern (α=0.05). Results: There was no significant difference except in buccolingual diameter (p<0.05) and buccolingual diameter at the cervix (p<0.05). The relative surface area of the total clinical crown was 65.76% for the buccal half and 34.24% for the lingual half, with a ratio of 2:1. In the case of the presence of two lingual cusps, the ratio was 21.47% for the mesiolingual half and 14.12% for the distaolingual half, with a ratio of 3:2. The dominant central groove patterns of the second premolar were the H-pattern (42.0%), followed by the Y-pattern (37.7%), then the U-pattern (20.3%). The relative buccal half was largest in the U-pattern central groove and the relative lingual half was largest in the Y-pattern central groove (p<0.05). Conclusion: This study is significant in that it measured quantitative surface areas and the findings could be a meaningful reference to comprehend dental anatomy in Koreans.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.211-221
• /
• 2006

The aim of present study was to evaluate the influence of periodontal status of adjacent tooth and loading time to the prevalence of red complex of implant sulcus. In 97 patients, partially edentulous subjects with endosseous root-form implants were selected. All subjects were medically healthy and had not taken systemic antibiotics and professional plaque control 3 months before sampling. The number was as follows: clinically healthy implants:161, clinically unhealthy implants:22, clinically healthy adjacent teeth:73, clinically unhealthy adjacent teeth:38. All teeth and implants of each patient were examined probing depth(PD), modified sulcus bleeding index(mSBI), and modified plaque index(mPI), and samples of subgingival plaque were obtained at each site with sterile curet or fine paper points, then the plaque transferred to PBS. Obtained samples were examined for the presence of P. gingivalis, T. forsythensis, and T. denticola by the polymerase chain reaction (PCR). The relationship among clinical parameters and the colonizations by the 3 bacterial species from adjacent teeth and implants region were analyzed by student t-test (p<0.05). The results of this study were as follows: 1. mPI and mSBI of implant increased with increasing of same indices of adjacent tooth(p=0.03,0.001), but not in the PD . 2. The mPI, mBI, PD of implants was higher when red complex exist. 3. The prevalence of red complex was higher when the periodontal condition is unhealthy. 4. The prevalence of red complex of implants has no significant relation to the probing depth of adjacent tooth. 5. Prevalence of P. gingivalis, T. forsythensis of implants increased with loading time. (p=0.02,0.018) These results shows the importance of oral hygiene and supportive periodontal therapy.