• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.4.1-4.10
• /
• 2019

Background: The mandibular third molar (M3) is typically the last permanent tooth to erupt because of insufficient space and thick soft tissues covering its surface. Problems such as alveolar bone loss, development of a periodontal pocket, exposure of cementum, gingival recession, and dental caries can be found in the adjacent second molars (M2) following M3 extraction. The specific aims of the study were to assess the amount and rate of bone regeneration on the distal surface of M2 and to evaluate the aspects of bone regeneration in terms of varying degree of impaction. Methods: Four series of panoramic radiographic images were obtained from the selected cases, including images from the first visit, immediately after extraction, 6 weeks, and 6 months after extraction. ImageJ software^® (NIH, USA) was used to measure linear distance from the region of interest to the distal root of the adjacent M2. Radiographic infrabony defect (RID) values were calculated from the measured radiographic bone height and cementoenamel junction with distortion compensation. Repeated measures of analysis of variance and one-way analysis of variance were conducted to analyze the statistical significant difference between RID and time, and a Spearman correlation test was conducted to assess the relationship between Pederson's difficulty index (DI) and RID. Results: A large RID (> 6 mm) can be reduced gradually and consistently over time. More than half of the samples recovered nearly to their normal healthy condition (RID ≤ 3 mm) by the 6-month follow-up. DI affected the first 6 weeks of post-extraction period and only showed a significant positive correlation with respect to the difference between baseline and final RID. Conclusions: Additional treatments on M2 for a minimum of 6 months after an M3 extraction could be recommended. Although DI may affect bone regeneration during the early healing period, further study is required to elucidate any possible factors associated with the healing process. The DI does not cause any long-term adverse effects on bone regeneration after surgical extraction.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.85-106
• /
• 1986

The purpose of this investigation was to know the means of the T.M.J. space and to compare spational differences in centric relation and centric occlusion by the T.M.J. Tomogram and to study the correlation between the articular eminence slope and the lingual surface slope of the maxillary central incisor by the Cephalogram in near normal occlusion subjects. These results could give contribution for the diagnosis of orthodontic treatment and T.M.J. dysfunction and the assessment of orthopedic treatment and orthognathic surgery. 44 young adults (28 men and 16 women, 21 to 27 years of age) were selected from the Dental students in Yonsei Univ. Criteria for selection was normal occlusion, no clinical signs and T.M.J. dysfunction, no history of orthodontic treatment, and no missing tooth. After submental vertex view analysis. each subject was given the T.M.J. Tomogram in centric relation and centric occlusion and the Cephalogram was given with Quint Sectograph. All data was recorded and statistically processed with the CYBER computer system. Results were analyzed: the following findings and conclusions were derived. 1. The mean value for the combined right and left anterior joint space was 2.549mm, the posterior space was 2.260mm, and superior space was 3.31mm in centric relation. The anterior space was 2.316mm, posterior space was 2.474mm, and superior space was 3.435mm in centric occlusion. 2. In the centric relation position, both condyles were placed more posterioly and superioly in their fossae than in the centric occlusion position by the spatial difference. 3. In the centric occlusion position, both condyles were more symmetrically placed in their fossae with equal anterior-posterioly rather than in the centric relation position. 4. The mean articular eminence angle was $48.19^{\circ}$ and the mean fossa height was 7.911mm. A strong positive correlation between the articular eminence angle and fossa height in T.M.J. Tomogram was found. 5. In Cephalometric analysis, there was a strong positive correlation between the articular eminence slope and the lingual surface slope of the upper central incisor to the FH plane, occlusal plane, and S-N plane. 6. There was moderate positive correlation between the S-E measurements and the fossa height, articular eminence angle, and DcGn < F-H.

• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.591-600
• /
• 1998

The purpose of this study was to investigate the root resolution and repair pattern of human teeth according to the force magnitude, direction and duration during the initial leveling and alignment phase. 40gms to 500gms of force applied to the 37 experimental teeth with duration of 3 weeks to 7 months. Then, the experimental teeth were extracted. 13 control teeth were extracted without treatment. The results are as follows: 1. $59.5\%$ of 37 teeth exhibited root resorption. The initial resorption site was visible at the apex within 3 weeks with 100 gms samples, and the initial repair site was visible at the apex within 3 months with 400 gms samples. 2. Number of resorbed teeth increased with the duration of the force. 3. The depth of the resorption increased with the magnitude of the force. 4. The areas of resorbed root corresponded with the loading pattern. 5. The areas of resorbed root were highly correlated with the magnitude of the force. The result of this study suggest that root resorption could occur during the initial leveling and alignment phase, These initial injuries are all small and insignificant. It is the extensive type of apical root resolution that must be regarded as deleterious to the function and stability of the tooth moved. During the initial leveling and alignment phase lighter force of the interrupted type and short treatment period would be favorable with regard to avoidance of root resorption and repair of resorbed root surface.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.73-82
• /
• 2008

Dental caries is an infectious disease caused by mutans streptococci, and is a primary etiologic agent of dental caries in humans. The molecular pathogenesis of mutans streptococcal-associated dental caries occurs in three phases. Firstly, S. mutans attaches to tooth surface via a cell surface adhesion termed antigen I/II. In the second phase, the glucosyltransferase(GTFs) synthesize polymers like glucans in the presence of sucrose. In the third phase, the multivalent glucans interacts with glucan binding proteins (GBPs) and they make dental plaque and accumulation of microorganisms. Many studies and clinical trials have indicated that a mucosal immune response to these antigens(Ag I/II, GTFs, GBPs) of S. mutans can influence the pathogenesis of dental caries. So these antigens can be important vaccine candidates for immunologic intervention against dental caries. In this study, we cloned the genes for GTFb, GTFc, GTFd from S. mutans GS-5 and did the nucleotide sequence analysis. And the recombinant proteins of GTFd and N-terminus of GTFd were expressed. Intact GTF which we get from this experiment can be used for antibody production specific for any GTF activity domain through animal experiment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.55-69
• /
• 1987

The purpose of this study was to evaluate the stress distributions of the fixed partial denture with five unit intermediate abutment. This fixed partial denture was attached to a three dimensional photoelastic epoxy resin model. Three dimensional photoelastic models were used, with the stress areas recorded photographically. A vertical load was applied to the second molar, which is the most posterior abutment of the fixed partial denture. Similarly, a vertical load was applied to the first molar because this tooth receives the heaviest masticatory load. These loads were added to two types of fixed partial denture. the rigid connector, and the nonrigid connector which was connected on the distal side of the intermediate abutment by a key and keyway device. After the stress patterns in surrounding tissues were observed, the following conclusions were as follows: 1. When the vertical load was applied to the first and second molars on the occlusal surfaces, the surrounding tissues of the roots of the canine, the second premolar, and the second molar were all compressive stresses. 2. When the vertical load was applied on the occlusal surface of the second molar, the tissue surrounding the roots of the canine, the second premolar, and the second molar all showed more stresses with the nonrigid connector than with the rigid connector. 3. When the vertical load was applied to the occlusal surface of the first molar, the stress concentration on the canine and the second molar was similar, whether the rigid or nonrigic connectors were used. However, on the second premolar, the stress concentration shown by the nonrigid connector was noticeably more than that shown by the rigid connector. 4. Whether the rigid or nonrigid connectors were used, when the load was placed on the first molar, the stress concentration on the canine and the second premolar was greater than that observed for the second molar. When the load was placed on the second molar, the load affected the second molar more than the canine and the second premolar.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.237-245
• /
• 2000

For the purpose of comparing the bond strengths of some tooth adhesive restoration materials on primary enamel and dentin, 4 kinds (7 brands) of restorative materials including a composite resin (Z 100), a conventional glass ionomer cement (Chem-Flex), 2 brands of resin-modified glass ionomer cements (Fuji II LC-I, Vitremer), and 3 brands of compomers(Dyract AP, F2000, Compoglass) were investigated using UTM for measuring the shear bond strengths. Additionally the failure modes were examined by histologically observing the fractured surfaces of each specimen. The following results were obtained. 1. The shear bond strengths of Z 100 to the primary enamel were higher than those of other experimental materials except Fuji II LC-I, which showed significantly higher bond strength than Chem-Flex or Vitremer (P<0.05). 2. The shear bond strengths of Z 100 to the primary dentin were higher than those of other experimental materials except Dyract AP and Fuji II LC-I, both of which showed significantly higher shear strength than Chem-Flex or Vitremer (P<0.05). 3. The shear bond strengths of all restorative materials except Dyract AP showed relatively higher values to enamel surface than to dentin surface. In Dyract AP, the reverse was true significantly. 4. All materials examined showed cohesive failures except some Chem-Flex and Vitremer, which showed adhesive failures.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.189-195
• /
• 2003

The objective of this study is to improve the optical sensitivity of laser fluorescence for detection of incipient enamel caries. An incipient carious lesion was formed in various stages by placing an enamel specimen of a bovine tooth in STPP demineralization solution. After measuring the optical density of the lesion surface by laser fluorescence induced by argon laser and various alter of yellow(500-520nm), amber(520-540nm), orange(540-560nm), and red(560-580nm), the specimen was cut vertically to measure the depth of the lesion using a polarizing microscope. SAS statistical program was used to analyze the relationship between the optical density of the lesion suface and the depth of the lesion. The results were as follows: 1. The optical density of early carious lesion, measured by laser fluorescence with amber and orange filter, and lesion depth observed by polarizing microscope, were increased as demineralization time increased. 2. The correlation coefficient between optical density of the lesion surface and the histological depth of the lesion was the highest in orange filter(r=0.49), followed by amber(r=0.32), yellow(r=0.13) and red(0.01). 3. Regression analysis showed that the most linear relationship between the optical density and the lesion depth was existed in orange filter group. In regard above results, laser fluorescence could be considered to be reliable for optical diagnosis of dental caries.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.601-606
• /
• 2009

Amelogenesis Imperfecta (AI) is a genetic disorder which retards the development of enamel and it can be classified into three types: hypoplastic, hypomaturation, hypocalcified type. This can occur both in deciduous and permanent dentition. A 8 year 8 month old patient with a chief complaints of delayed eruption on upper anteriors, calculus deposit on lower anteriors and anterior openbite visited the clinic. Anteriors had thin layer of enamel and were very narrow. Especially lower anteriors had rough surface and were in bad shape. Teeth were very hypersensitive to thermal changes. Upper and lower first molars showed severe attrition on the occlusal surface. Radiographs also verified hypoplastic enamel in the whole dentition including the teeth in the tooth bud. The patient was diagnosed as hypoplastic AI, and is being treated at the pediathc and prosthodontic department of the Kyunghee dental university hospital. To improve the function, esthetics, hypersensitivity of the AI patients, restorations on the posteriors and the anteriors with oral hygiene instruction are necessary, Constant follow-up check is needed until full growth and after full growth, cooperative care with the other department is needed.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.479-489
• /
• 1997

The purpose of this study was to evaluate the effect of the Nd : YAG laser on the tooth hypersensitivity by the observation of the morphological changes of the dentinal surface irradiated with Nd : YAG laser by use of SEM. In 40 mandibular and maxillary molars without any carious lesion or restoration, severe attrition and abrasion, Enamel was removed with fine grit diamond bur and exposed dentinal surfaces were polished with Soflex discs. In control group (10 teeth), exposed dentinal surfaces were acid-etched with 10 % Maleic acid for 15 seconds. In the experimental group 1 (10 teeth), acid-etched dentinal surfaces with 10% Maleic acid were prepared by Nd : YAG laser (6 watts power, 1 psi water, 18 psi air) for 2 minutes. In the experimental group 2 (10 teeth), exposed dentinal surfaces were irradiated with Nd: YAG laser (10 watts power, 3 psi water, 10 psi air) until the painted black stains on the dentinal surfaces were completely removed. In the experimental group 3 (10 teeth). dentinal surfaces were prepared with Nd : YAG laser (6 watts power, 1 psi water, 18 psi air) until the painted black stanins on them were completely removed and then the irradiated dentinal surfaces were acid-etched with 10 % Maleic acid for 15 seconds. The specimens were routinely processed and observed with scanning electron microscope. The results were as follows : 1. In the irradiated dentinal surfaces, the characteristics of the melting and recrystalization on the dentinal surfaces were observed. Compared with the results in the control group, we could observe that in the irradiated dentinal surfaces, the aperture of the dentinal tubules were reduced and there were more debris obstructing the dentinal tubules. 2. In the irradiated dentinal surfaces, crater structures were commonly present and in the crater bottoms, there were a lot of bead like melted dentin structures, which had the ruptured opening in the center of them. 3. The melted dentins and cracks in the smear layer were less frequently observed in the irradiated dentinal surfaces using copious cooling water than in the irradiated dentinal surfaces using scare cooling water.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.180-188
• /
• 2002

Newly developed curing units(plasma arc curing units) operate at relatively high intensity and are claimed to result in optimum properties of composite resin in a short curing time. The purpose of this study was to evaluate the microhardness and microleakage at the resin-tooth interface of two types of composite resins polymerized with visible light and plasma arc curing units. The results from the present study can be summarized as follows 1. Microhardness in each depth was shown to be higher in group AHL than AP3 & AP6. Group ZHL was lower than AP6 at surface(p<0.05) and had no statistically significant difference at 1mm and 2mm(p>0.05). In other depths, group ZHL was higher than ZP3 and ZP6(p<0.05). 2. The incremental reduction in microhardness with depth was shown to be in all group except in surface-1mm of group AHL and $1{\sim}2mm$ of group ZHL(p<0.05). 3. Degree of microleakage in all oops were shown to be higher in gingival margin than occlusal margin but no statistically significant difference(p>0.05). 4. Differences between curing methods in microleakage were shown to be no statistically significant difference(p>0.05). 5. Differences between composite resins in microleakage were shown to be no statistically significant differ once(p>0.05).