• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.5
• /
• pp.401-409
• /
• 2006

Infections of the oral and maxillofacial region are one of the most common conditions for which a patient presents to a maxillofacial surgeons. Although these infections can arise from a variety of source, dental disease is the most common etiology. So, odontogenic infection are frequently encountered in the practice of oral and maxillofacial surgery. These infections often respond to antimicrobial chemotherapy or surgical intervention, such as extraction of teeth, incision and drainage through clinical features. But, odontogenic infections have the potential to spread via the fascial spaces in the head and neck region, and, they spread to cavernous sinus, deep musculofascial space and other vital structure. We have undertaken clinical studies on infections in the oral and maxillofacial regions by analyzing retrospectively hospitalized patients in the Dept. of Oral and Maxillofacial Surgery, Chonbuk National University Hospital past 5 years from 2000 to 2004. And, the patients' age, sex, medical history, causes of the infection, surgical intervention, and other clinical parameters were reviewed. The obtained results were as follows : 1. The most frequent cause of oral and maxillofacial infection was odontogenic. And in the odontogenic cause, dental caries was the most common cause (47.2%). 2. The most common fascial space involved was the submandibular space (15.7%), followed by the buccal space (14.8%). 3. 60.4% of all patients required surgical drainage of the abscess, endodontic treatment or tooth extraction or periodontal treatment with drainage. 4. The most causative organism isolated from the pus culture were streptococcus viridans (53.9%). 5. Underlying medical problems were found in 136 patients (41.9%), the most common being hypertension (27.9%) and diabetes (14.7%).

• Journal of the Korean Society of Radiology
• /
• v.12 no.4
• /
• pp.497-503
• /
• 2018

The purpose of this study was to investigate the degree of image degradation and the improvement of image quality caused by the density difference between the orthodontic filling material and the surrounding anatomical structure during the examination of the facial CT by quantitative and qualitative analysis. The teeth were scanned using 64-MDCT (Discovery 750 HD, GE HEALTH CARE, Milwaukee, USA). The teeth were scanned and compared according to tube voltage, silicone application, and MAR application. As a result, 10.36% CT value decreased at 140 kVp and 5.81% decrease at the application of silicon material. As a result of the qualitative evaluation, it was evaluated that 7 of the 10 observers and 3 of the acceptors were applied to the MAR algorithm. Therefore, it is possible to reduce the unnecessary burden on the radiation exposure dose as well as to reduce the loss of image data by reducing the high density artifacts, as well as the inspection parameters used in the current clinical application and various algorithms that can reduce the high density artifacts. It can be expected to provide a lot of image information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.121-126
• /
• 2018

The oral hygiene of patients admitted to the ICU (Intensive Care Unit) is very important. Critically ill patients are basically immunocompromised ones because of the high risk of infection by various pathogenic bacteria. The mouth is not only the primary site of infection, but also the site of systemic infections. The purpose of this study was to design a mouthpiece type vacuum oral cleaner for the oral care of seriously ill patients. A 3D CAD modeling and flow analysis model were established for a double structure type cleaner and standard tooth model, and their pressure and flow characteristics were analyzed. The pressure inside the oral cleaner was almost constant, but the velocity distribution showed a large difference between the inside and outside of the teeth. The velocity at the center region inside of the teeth was the highest, and the speed decreased as the distance from the center increased. In the analysis of the case where the suction tube was replaced by the drainage tube, the velocity at the center of the outer portion of the teeth was the highest. In order to increase the effectiveness of the oral cleaner, alternating between suction and drainage is proposed, and a design complement to increase the speed of the molar region is required.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.33.1-33.7
• /
• 2019

Background: The concept of the ideal morphology for the alveolar bone form is an important element to reconstruct or restore the in maximizing esthetic profile and functional alveolar bone restoration. The purpose of this preliminary study is to evaluate the normal alveolar bone structure to provide the standard reference and guide template for use in diagnosing for implant placement, determining the correct amount of bone augmentation in actual clinical practice and producing prostheses based on three-dimensional imaging assessment of alveolar bone. Methods: This study was included 11 men and 11 women (average age, 22.6 and 24.5 years, respectively) selected from among 127 patients. The horizontal widths of alveolar bone of maxilla and mandible were measured at the crestal, mid-root, and root apex level on MDCT (multi-detector computed tomography) images reconstructed by medical imaging software. In addition, tooth dimensions of the central incisors, canines, second premolars, and first molars of maxilla and mandible, including the horizontal width of the interdental alveolar bone crest, were also measured and statistically analyzed. Results: The horizontal alveolar bone width of the palatal side of maxilla showed a distinct increment from the alveolar bone crest to the apical region in both anterior and posterior areas. The average widths of the maxillary alveolar ridge were as follows: central incisor, 7.43 mm; canine, 8.91 mm; second premolar, 9.57 mm; and first molar, 12.38 mm. The average widths of the mandibular alveolar ridge were as follows: central incisor, 6.21 mm; canine, 8.55 mm; second premolar, 8.45 mm; and first molar, 10.02 mm. In the buccal side, the alveolar bone width was not increased from the crest to the apical region. The horizontal alveolar bone width of an apical and mandibular border region was thinner than at the mid-root level. Conclusions: The results of the preliminary study are useful as a clinical guideline when determining dental implant diameter and position. And also, these measurements can also be useful during the production of prefabricated membranes and customized alveolar bone scaffolds.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.3
• /
• pp.313-319
• /
• 2016

Wolf-Hirschhorn syndrome (WHS), associated with the deletion of the short arm of chromosome 4, causes multiple congenital malformations. Patients suffer from various deformities, including mental and growth disorders, epilepsy, hypotonia, congenital heart defects, and atypical craniofacial features. The "Greek warrior helmet appearance" is the most characteristic feature, with a prominent glabella, high arched eyebrow, broad nasal bridge, and hypertelorism. Cleft lip with or without cleft palate is observed in 30% of patients. Dental structure anomalies also exist including multiple tooth agenesis and over-retained primary molars caused by MSX1 gene impairment, and cone-shaped and taurodontic teeth. This case, a 9-year-old girl with WHS, showed intellectual disability, delayed growth development, previous occurrence of seizures, otitis media, and the typical facial features of WHS. Dental findings included multiple congenital missing teeth, over-retained primary teeth, and severe caries on the primary molars. Dental treatments were performed under general anesthesia. This report documents the characteristics of WHS, including general and oral features, and discusses the importance of oral hygiene and preventive dental management.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.1
• /
• pp.6-10
• /
• 2016

Esophageal atresia is the abnormal development of the esophagus that connects the mouth to the stomach. This birth defect results in the incomplete connection of the esophagus to the stomach causing an inability to swallow properly and breathing difficulties. Surgery is the only treatment for esophageal atresia. Patients undergone an esophageal reconstruction usually suffer from gastroesophageal reflex. A 5-year old boy with congenital esophageal atresia and Sciwitar syndrome visited Seoul National University Dental Hospital because generalized excessive loss of tooth structure. The patient had history of multiple operations for reconstruct esophagus. He had little food intake experience thought oral and had difficulty to swallowing. The patient was generalized severe erosive and decayed state. For patient, the dental procedure under general anesthesia was scheduled due to the multiple caries with erosion and poor cooperation. Under general anesthesia, pulpectomy and restoration as well as extraction was performed. Gastroesophageal reflex is potentially serious condition, with various extraesophageal adverse effects such as dental erosion. To prevent progression of dental caries, dietary counselling and oral hygiene instruction should be reinforced. Also, restorations to erosive teeth will maintain esthetics and function and preserve pulp vitality.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.577-577
• /
• 2001

The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.23-33
• /
• 2003

The purpose of this study was to compare in vitro interfacial relationship of restorations bonded with three self-etching primer adhesives and one self-etching adhesive. Class I cavity preparations were prepared on twenty extracted human molars. Prepared teeth were divided into four groups and restored with four adhesives and composites Clearfil SE $Bond/Clearfil^{TM}$ AP-X (SE), UniFil $Bond/UniFil^{\circledR}$ F (UF), FL $Bond/Filtek^{TM}$ Z 250 (FL) and Prompt $L-Pop/Filtek^{TM}$ Z 250 (LP) After storing in distilled water of room temperature for 24 hours, the specimens were vertically sectioned and decalcified. Morphological patterns between the enamel/dentin and adhesives were observed under SEM. The results of this study were as follows : 1. They showed close adaptation between enamel and SE, UF and FL except for LP. 2. The hybrid layer in dentin was $2{\;}\mu\textrm{m}$ thick in SE, $1.5{\;}\mu\textrm{m}$ thick in UF, and $0.4{\;}\mu\textrm{m}$ in both FL and LP. So, the hybrid layers of SE and UF were slightly thicker than that of FL and LP. 3. The lengths and diameters of resin tags in UF and FL were similar, but those of LP were slightly shorter and slenderer than those of SE. 4. The resin tags were long rod shape in SE, and funnel shape in other groups Within the limitations of this study, it was concluded that self-etching primer adhesives showed close adaptation on enamel. In addition, the thickness of hybrid layer ranged from $0.4-1.5{\;}\mu\textrm{m}$ between adhesives and dentin. The resin tags were long rod or funnel shape, and dimension of them was similar or different among adhesives.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.1
• /
• pp.1-10
• /
• 2013

Dental erosion is a complex disease of multifactorial etiology with high risk of loss of tooth structure, which still has not been appropriate interest. The aim of this study was to assess the prevalence and risk indicators of dental erosion in Korean school children. A cross-sectional survey was performed on 664 children aged 8~9 years. Data concerning gender, types of caregiver, dietary habits, oral hygiene habits and parental knowledge were obtained from a questionnaire, which was answered by the parents of the children. Association between erosion and the factors were statistically analyzed with chi-squared test and independent t-test at a significance level of 0.05. Dental erosion was present in 242 children. In carbonated drinks, dental erosion was significantly associated with preference, frequency of consumption and the ingestion method (p < 0.05). In fruit juices, dental erosion was significantly associated with preference and frequency of consumption (p < 0.05), but no significant associations were found with the ingestion method (p > 0.05). There were no significant associations between dental erosion and gender, type of caregiver, oral hygiene habits and parental knowledge (p > 0.05). In conclusion, it was considered that motivation to be followed by practice is important as well as education for prevention of dental erosion.

• Restorative Dentistry and Endodontics
• /
• v.17 no.2
• /
• pp.307-330
• /
• 1992

The aim of this study was to investigate the physical properties of visible light curing Glass Ionomer cement for restorative esthetic filling. The control group was the autopolymerizing GC Fuji II Glass Ionomer cement (2.2: 1 P/L ratio) and the experimental groups were made by following procedure. To induce the polymerization by visible light, the powder of GC Fuji II GI cement and the liquid of Vitrabond for base & liner were mixed in an amalgam capsule with 2.5:1, 3.0:1, 3.5:1 P/L ratio (% wt/wt). After fabrication of specimens, compressive strength, fracture toughness ($K_{IC}$) Scanning Electron Microscope and X-ray Diffraction, water-leachable content, marginal leakage and surface roughness were studied. The results were as follows: 1. Only experimental No. 1 group (visible light curing) showed less compressive strength than control group 1 hour after curing. Strength was increased with aging in all groups, so the compressive strength of light curing groups was no less than that of autopolymerizing group after 3 weeks. 2. Experimental No.3 group (visible light curing) was inferior to No.2 group (visible light curing) in fracture resistance but light curing groups were more resistant to fracture than autopolymerizing group and showed ductile fracture pattern as compared with the brittle fracture pattern of autopolymerizing group. 3. From scanning electron microscopic image, various sized unreacted powder particles, surrounded by silica gel, were embedded in polysalt matrix. Light curing groups showed little crack and more dense unreacted particles than autopolymerizing group. 4. From X-ray diffraction analysis, GC Fuji II Glass Ionomer cement powder and all groups showed glassy appearance but light curing groups seemed to be more intensive in crystaline than autopolymerizing group. S. The most significant dissolution was shown in early setting period in all group. Light curing groups were dissolved less than autopolymerizing group. 6. Marginal leakage was not different significantly in case of cavity margin composed of same tooth structure (ex. only enamel margin, only dentin margin) but much more leakage was shown in dentin/cementum margin than enamel margin. In only case of only enamel margin, light curing groups were superior to autopolymerizing group. 7. All groups showed relatively smooth surface, which irregularity was less than $1{\mu}m$. Light curing groups were smoother than autopolymerizing group.