• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.389-390
• /
• 2006

The cycloidal reducer is one of the velocity controlling equipments in machinery. It has advantages of the higher reduction ratio, the higher accuracy, the easier adjustment of the transmission ratio and the smaller workspace than any other kinds of the reducers. This paper proposes a simple and exact approach for the lobe profile design of the two teeth difference cycloidal plate gear, which is different from the standard cycloidal reducer, by means of the principle of the instant velocity center in the general contact mechanism and the homogeneous coordinate transformation.

• Journal of Aquaculture
• /
• v.17 no.3
• /
• pp.197-208
• /
• 2004

Five commercially valuable Korean Veneroid, Protothaca jedoensis, Ruditapes philippinarum, Saxidomus purpuratus, Cyclina sinensis and Meretrix lusoria were recognized by comparing internal and external morphological characters. As length of the primary tooth was directly grown proportional to shell size but all other characters were not measured according to size of shell. Hence, the morphological characters of these Veneroids may be estimated from the size of the unique primary tooth and it might be enough to be a good criterion for identification of species among Veneriods. Numerical index of hinge plate length of these species was assessed systematically, irrespective of measuring the length, height and width of the shell. The highest internal and external morphological similarity was observed between P. jedoensis and R. philippinarum and the lowest similarity was observed between P. jedoensis and M. lusoria. These similarities may be affected by multiple environmental factors as well as genetic characters. For artificial seed production of P. jedoensis, R. philppinarum, a closest relative among the five species, must be focussed.

• Imaging Science in Dentistry
• /
• v.48 no.2
• /
• pp.87-96
• /
• 2018

Purpose: The present study aimed to evaluate which of the following imaging methods best assessed misfit at the tooth-restoration interface: (1) bitewing radiographs, both conventional and digital, performed using a photostimulable phosphor plate (PSP) and a charge-coupled device (CCD) system; (2) panoramic radiographs, both conventional and digital; and (3) cone-beam computed tomography (CBCT). Materials and Methods: Forty healthy human molars with class I cavities were selected and divided into 4 groups according to the restoration that was applied: composite resin, composite resin with liner material to simulate misfit, dental amalgam, and dental amalgam with liner material to simulate misfit. Radiography and tomography were performed using the various imaging methods, and the resulting images were analyzed by 2 calibrated radiologists. The true presence or absence of misfit corresponding to an area of radiolucency in regions subjacent to the esthetic and metal restorations was validated with microscopy. The data were analyzed using a receiver operating characteristic (ROC) curve, and the scores were compared using the Cohen kappa coefficient. Results: For bitewing images, the digital systems (CCD and PSP) showed a higher area under the ROC curve (AUROC) for the evaluation of resin restorations, while the conventional images exhibited a larger AUROC for the evaluation of amalgam restorations. Conventional and digital panoramic radiographs did not yield good results for the evaluation of resin and amalgam restorations (P<.05). CBCT images exhibited good results for resin restorations(P>.05), but showed no discriminatory ability for amalgam restorations(P<.05). Conclusion: Bitewing radiographs (conventional or digital) should be the method of choice when assessing dental restoration misfit.

• The korean journal of orthodontics
• /
• v.14 no.2
• /
• pp.203-215
• /
• 1984

This experiment was performed to explore the effect of electric currents and orthodontic forces on bone $PGE_2$ content and orthodontic tooth movement on cats. Stainless steel electrodes were connected a power pack consisting of five miniature batteries, a transistor, and a resistor. The current $(10{\pm}2{\mu}A)$ was provided by a constant source encased in a palatal acrylic plate. In first experiment, the cathode was placed mesial to the right maxillary canine tooth and the anode was positioned distal to the tooth, Sham electrodes were placed new the left cuspid, to serve as control. Nine cats were divided into three groups evenly. Groups of three animals were treated with electric currents only-for 1, 3 and 7 days, respectively. In second experiment, electric currents and the orthodontic forces of about 80 gm were applied to the right maxillary canine, and the orthodontic forces only were applied to the left maxillary canine. 3 groups of three cats each were treated in this experiment-for 1, 3 and 7 days, respectively. Alveolar bone samples were obtained from sites of tension and compression as well as from contralateral sites. Bone samples were extracted by homogenization in $40\%$ ethanal. The supernatant partitioned twice with 2 volumes of petroleum ether to remove neutral lipids and the aqueous supernatant partitioned in ethyl acetate. After drying the solvent, $PGE_2$ was measured by radioimmunoassay technique. The obtained results were as follows. 1. Teeth treated with combined force and electricity moved faster than those treated with force alone. 2. Alveolar bone $PGE_2$ content of electric stimulation was increased at both electrodes. 3. Alveolar bone $PGE_2$ content of mechanical stimulation at compression sites was gradually increased at all time period. At tension site, $PGE_2$ content increased after 1 day of mechanical stimulation remained elevated at all time period. 4. Alveolar bone $PGE_2$ content of compression sites was increased more than that of tension sites from mechanical stimulation as well as electrical stimulation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.2
• /
• pp.137-145
• /
• 1993

The purpose of this study was to observe the effect on teeth and tibia bone histopathologically in rats by the richitogenic diet. For this purpose, 48 sprague-dewley rats, weighing 80g or more, divided into 6 groups, and sacrificed on the 1st, 2nd, 3rd, 4th, 5th, 6th weeks after experiments respectively. The tissues contain tooth, and tibial bone were fixed in 10% normal formalin solution, decalcified in Plank-Rychlo solution, embedded in paraffin, sectioned in $6-8{\mu}$ as usual manner, the tissues were stained in hematoxylin eosin, and examined hisopathologically. Follow results were attained 1. Pyknotic appearance of odontoblastic layer was noticed on the 1st week, and increased on the 2nd weeks, and it is appeared that degeneration and dearrangements of odontoblasts on the 4 weeks. But a little recovered on the 6th weeks. 2. The thickness of predentin layer was increased on the 2nd weeks, and increased remarkedly on the 3rd weeks and reached the maximum on the 5th weeks. 3. The interglobular dentin was appeared in spotty shape on the 2nd weeks, and increased on the 4th, 5th, weeks, and large amount of inter-globular dentin was appearanced on the 6th weeks. 4. It is appeared that enamel hypoplasia on the 4th weeks. 5. Epiphyseal and metaphyseal plate of tibia was increased from/on the 2nd weeks, increased maximumly on the 5th weeks. And pyknotic, dearrangements, and hyperchromatic appearances of chondrocytes on the plate were increased on the 1st week.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.3
• /
• pp.135-139
• /
• 2014

This following case report describes the open reduction, internal fixation and the reconstruction of an extensive comminuted mandibular fracture with bilateral condylar fractures in a 19-year-old male patient with an intellectual disability and autistic disorder. He suffered fall trauma, resulting in shattered bony fragments of the alveolus and mandibular body between both mandibular rami, the fracture of both condyles and the avulsion or dislocation of every posterior tooth of the mandible. The patient underwent open reduction and internal fixation between both mandibular rami using a reconstruction plate, open reduction and internal fixation of the shattered fragments using miniplates and screws, and the closed reduction of the bilateral condylar fractures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2009-2014
• /
• 2012

It is very important to minimize the die roll height of gear, in order to maximize the shear cutting surface(tooth surface) of fine blanking. In this paper, the fine blanking tool sets were manufactured in order to study the die roll height according to V-ring position and die chamfer shape. They were constituted of the various die inserts and guide plate inserts with different die chamfer shape and different V-ring distance. The fine blanking experiment was conducted with the fine blanking tool sets and the die roll height of the gear samples was measured. It should be noted that die roll height on the fine blanked gear increased with increasing the V-ring distance and die chamfer angle.

• Imaging Science in Dentistry
• /
• v.52 no.1
• /
• pp.75-82
• /
• 2022

Purpose: This cross-sectional study evaluated and categorized the tomographic sagittal root position (SRP) of the maxillary anterior teeth in a Brazilian population. Materials and Methods: Cone-beam computed tomographic scans of 420 maxillary anterior teeth of 70 patients (35 men and 35 women, mean age 25.2±5.9 years) were evaluated. The SRP was classified as class I, II, III, or IV. In class I, the root is positioned against the buccal cortical plate; in class II, the root is centered in the middle of the alveolar housing; in class III, the root is positioned against the palatal cortical plate; and in class IV, at least two-thirds of the root engage both the buccal and palatal cortical plates. Results: In total, 274 teeth (65.2%) were class I, 39 (9.3%) were class II, 3 (0.7%) were class III, and 104 (24.8%) were class IV. The frequency distribution over the teeth groups was different from the overall analysis. Important differences were found in the frequencies of classes I, II, and IV compared to other populations. Sex was not associated with the SRP classes (P=0.307). Age distribution was significantly different over the classes (P=0.004). Conclusion: The findings of this study on the distribution of SRP classes among the Brazilian population compared to other populations demonstrate that the SRP should be analyzed on a case-by-case basis for an accurate treatment plan in the maxillary anterior area.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.315-321
• /
• 2007

Removable appliance has many utilities in pediatric dentistry in the fields of space maintainance or occlusal guidance. In contrast to maxilla, many problems have occurred with mandible in using removable appliance such as deteriorated retention, inconvenience and patient's unwillingness to wear. It is probably due to adapting several retentive clasps at buccal side of the tooth, where there is actually little or no undercut especially in young children having the erupting teeth Moreover, acrylic base plate of conventional removable appliance is located at lingual parts, which leads to the conflict with alveolar crest undercut and sublingual soft tissues. Moreover, young children frequently do not follow the dentist's direction to elevate tongue properly during the impression taking process. Throughout this study, the position of clasps and acrylic baseplate was changed opposite to the traditional Hawley acrylic appliance in order to make a buccal acrylic appliance with buccal base plate and lingual clasp into primary dentition and early mixed dentition. This study was performed for the purpose of evaluating the buccal acrylic appliance in regards of patient compliance, retention and efficiency compared with traditional lingual acrylic appliance along with its merits and demerits. Buccal and lingual acrylic appliance were applied to 5 cases respectively which required space maintaining and tooth movement, and drew a comparison in relevance to patients' compliance, combination with the tongue's function and clinical effectiveness. According to this study, in every case buccal appliance was proved superior to lingual appliance in terms of retention and patients' compliance. Moreover, buccal appliance has shown to be similar to lingual appliance with respect to clinical effectiveness. Throughout this study, it was thought that, if removable appliance is to be applied to mandible, several drawbacks related to conventional lingual appliance shall be resolved. Conclusively, the buccal acrylic appliance is thought to be a good alternative in designing a mandibular appliance in young children and recommended to clinical applications.

• Imaging Science in Dentistry
• /
• v.31 no.3
• /
• pp.181-184
• /
• 2001

Thirteen-year-old girl complaining of the swelling and pain on the left midface visited our dental hospital. On the radiographic examination, well-defined radiolucent lesion with hyperostotic border was found in the left maxilla accompanying with the external root resorption of the involved teeth and the displaced second molar. CT showed calcified bodies, thinning of hard palate, inferior orbital wall and lateral wall of nasal fossa, and thinning and perforation of the buccal plate of the maxilla. Enucleation and curettage of the lesion and nasoantrostomy was carried out and histopathologic examination mainly showed a solid tumor tissue composed of odontogenic epithelium and pulp tissues admixed with dentin and enamel formation. And some part of reduced follicular epithelium of tooth germ showed a change mimicking calcifying odontogenic cyst. Taken together, we concluded the lesion is an ameloblastic fibro-odontoma with a change of calcifying odontogenic cyst.