• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제42권1호
• /
• pp.51-54
• /
• 2016

The present case report describes an external auditory canal injury following extraction of the lower molar. The external auditory canal was torn in the same fashion that occurs in an anterior tympanic plate fracture. This case demonstrates one of the rare complications associated with dental extractions.

• 동력기계공학회지
• /
• 제12권6호
• /
• pp.78-82
• /
• 2008

Plastic gears are more and more widely used in many industrial machine elements. Plastic gear has higher properties such as light weight, wear resistance, and vibration absorbing ability than metallic gears. But, in case of using an inaccurate plastic gear, its tooth breakage happen and fatigue life is shortened due to increase of applying load and temperature rising on the tooth flank. Inaccuracy of plastic gears such as pitch circle roundness and tooth profile generates vibration and noise. In this study, an internal plastic gears which is molded by a new injection mold structure are developed. The new mold structure is called the HR3P(hot runner type 3plate mold) that has an improved runner system in order to have good filling balance. As a result from this study, an internal gear with very accurate roundness was developed by using design of experiment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제44권6호
• /
• pp.251-258
• /
• 2018

Corticotomy was introduced as a surgical procedure to shorten orthodontic treatment time. Corticotomy removes the cortical bone that strongly resists orthodontic force in the jaw and keeps the marrow bone to maintain blood circulation and continuity of bone tissues to reduce risk of necrosis and facilitate tooth movement. In the 21st century, the concept of regional acceleratory phenomenon was introduced and the development of the skeletal anchorage system using screw and plate enabled application of orthopedic force beyond conventional orthodontic force, so corticotomy has been applied to more cases. Also, various modified methods of minimally invasive techniques have been introduced to reduce the patient's discomfort due to surgical intervention and complications after surgery. We will review the history of corticotomy, its mechanism of action, and various modified procedures and indications.

• 대한구순구개열학회지
• /
• 제10권2호
• /
• pp.81-88
• /
• 2007

Cleft lip and palate (CLP) is one of the most prevalent congenital craniofacial anomalies. It has a significantly greater incidence of dental abnormalities in number, size, shape, and eruption of the teeth. Knout-out mouse model can identify several genes which play an important role in tooth agenesis. Since disruption of these genes has been confirmed to result in tooth agenesis in humans, CLP associated with hypodontia may be the best models for isolated tooth agenesis. According to the studies of dental abnormalities in CLP, the severity of dental defect is known to be influenced by the CLP phenotype. The cumulative data obtained from mouse and human genetic studies indicated that MSX1, PAX9 and AXIN2 are considered as candidate genes in non-syndromic hypodontia, while Shh, Pitx2, Irf6, p63 and EDA pathway genes are involved in syndromic one. We expect that genetic approach of CLP can offer the basis for tooth regeneration and be a new target in hypodontia therapy.

• Restorative Dentistry and Endodontics
• /
• 제45권3호
• /
• pp.27.1-27.9
• /
• 2020

Apical surgery for a mandibular molar is still challenging for many reasons. This report describes the applications of computer-guided cortical 'bone-window technique' using piezoelectric saws that prevented any nerve damage in performing endodontic microsurgery of a mandibular molar. A 49-year-old woman presented with gumboil on tooth #36 (previously endodontically treated tooth) and was diagnosed with chronic apical abscess. Periapical lesions were confirmed using cone-beam computed tomography (CBCT). Endodontic microsurgery for the mesial and distal roots of tooth #36 was planned. Following the transfer of data of the CBCT images and the scanned cast to an implant surgical planning program, data from both devices were merged. A surgical stent was designed, on the superimposed three-dimensional model, to guide the preparation of a cortical window on the buccal side of tooth #36. Endodontic microsurgery was performed with a printed surgical template. Minimal osteotomy was required and preservation of the buccal cortical plate rendered this endodontic surgery less traumatic. No postoperative complications such as mental nerve damage were reported. Window technique guided by a computer-aided design/computer-aided manufacture based surgical template can be considerably useful in endodontic microsurgery in complicated cases.

• Archives of Pharmacal Research
• /
• 제13권2호
• /
• pp.211-213
• /
• 1990

To test flavonoids for antibacterial activity against oral micraorganisms, flavonoids, quercetrin and naringenin, were incorporated into two pharmaceutical preparations in the form of tooth paste. Samplees of dental plaque, the msot accused dental deposit which initiates the gingival and periodental diseases, were collected from the teeth surface of ten dental students at one week interval before and after using placebo, followed by two formulae of tooth paste containing 0.1% of quercetrin and naringenin (formulas I and II, respectively). The amount of dental plaque was assessed by the quigley and Hens index. Then plaque samples were subjected to bacteriological examination of Gram stain and plate counts of microorganisms. The amount of dental plaque was assessed by the Quigley and Hens index. Then plaque samples were subjected to bacteriological examination of Gram stain and plate counts of microorganisms. The results revealed that most of Gram negative cocci and bacilli were highly affected by the two formulae : the number of actinomycetes were decreased after using formula I and disappeared completely by the sue of formula II, while the number of Gram positive streptococci was highly decreased after the treatment with the two formulae. These results indicate a possible use of flavonoids to inhibit dental plaque formation.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.50-55
• /
• 2002

A roller gear cam mechanism is presented. It consists of two or more plate cams with particular teeth, called Conjugate Cam Tooth (CCT) and a turret with axially located rollers. A practical and available configuration has been found out by synthesizing its parameters. The profile equations of the conjugate cam are derived by using a relative velocity method. A program fur the design automation of shape of the conjugate cam and the motion simulation of this kind of mechanism has been deve1oped using the derived formulae with C++ language. Finally, an example is given.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.362-367
• /
• 2011

Organic ($Alq_3$) film, which was coated on a donor plate, was transferred to an organic light emitting diode (OLED) substrate with help of heat generated by a dithering laser beam. The laser beam was diffracted in an acousto-optic modulator (AOM), then focused on the laser-to-heat converting layer of the donor plate; the focused spot followed trajectories guided by rotation of a Galvano-mirror. Three different functional waveforms, sine wave, square wave, and saw tooth wave were applied to the AOM as modulation signal to generate the dithering beam. The fluorescence microscope images of the donor plate showed that the patterns of removed $Alq_3$ film were affected considerably by the modulation waveforms and the phase difference between adjacent dithering beams. Further, the printed images of Alq3 film on the OLED substrate were different from the patterns of removed Alq3 film. Atomic force microscope images indicated that not only direct transfer but also deposition by sublimated vapor of Alq3 contributed to the pattern formation. Printed patterns affected considerably the electricity-to-light conversion characteristics of OLEDs. For uniform transfer, not only the phase relation of dithering beam lines but also adequate waveform were important.

• Journal of the Korean Wood Science and Technology
• /
• 제31권5호
• /
• pp.96-103
• /
• 2003

국산 주요 침엽수재인 소나무, 잣나무, 낙엽송의 철물접합부 인장하중 특성 구명을 위하여 본 연구를 수행하였다. 철물 접합부의 최대 인장하중은 AA형의 경우 소나무가 3,612 kgf로 낙엽송, 잣나무에 비해 각각 1.2배, 1.7배, EA형의 경우 2,704 kgf로 1.1배, 1.5배 우수하였다. 또한 AA형은 EA형에 비해 3 수종 모두 약 1.2배 이상 높은 인장하중을 나타내었다. 철물접합부의 파괴모드는 주로 이의 빠짐, 철물의 인장파괴와 목재의 전단파괴로 이루어지며, 특히 소나무 접합부는 철물의 인장파괴를 나타내었다. 철물접합부재의 인장하중-변위 특성은 Foschi 모형으로 정확하게 추정할 수 있었으며, 철물접합부의 초기강성은 소나무 접합부재가 높게 나타났다. 국산 침엽수재의 철물접합부에 대한 설계하중은 소나무, 낙엽송, 잣나무의 순으로 높게 나타났으며, AA형의 경우 이당 설계하중이 소나무 25 kgf, 낙엽송 22 kgf, 잣나무 15 kgf이었으며, EA형의 경우 소나무 19 kgf, 낙엽송 17 kgf, 잣나무 13 kgf 이었다.

• 대한치과보철학회지
• /
• 제21권1호
• /
• pp.67-72
• /
• 1983

Path of insertion(1) can be defined that the direction of movement of an appliance from the point of initial contact of its rigid parts with the supporting teeth to the place of final rest. Krol(2) described that in the conventional path of insertion, all the rests are seated more or less simultaneously but in the use of the rotational path one segment of the partial denture is seated first then the remainder of the prosthesis is rotated into position. The rotational path of insertion is limited primarily to the tooth borne prosthesis. Its great advantages are the elimination of anterior clasps to improve ethetic and reduction of tooth coverage to minimize plaque accumulation. Either a rigid minor connector or proximal plate provides retention through its intimate contact with a proximal tooth surface below the height of contour as indicated at a o-degree tilt. A specially designed rest in conjunction with this retentive component satisfies the basic requirements of clasp design. The purpose of this study was a clinical evaluation of rotational path removable partial dentures. Author delivered rotational path removable partial dentures to three different cases of patients and evaluated function of the dentures, difficulties of removal and insertion of the dentures and supporting structures of the abutment teeth by means of clinical and X-ray examinations for eighteen months. According to the examination data author came to the conclusion that the prognosis of the rotational path removable partial dentures was excellent.