• Journal of Periodontal and Implant Science
• /
• v.51 no.4
• /
• pp.285-295
• /
• 2021

Purpose: The aims of the present study were 1) to quantitatively evaluate the extent of sinus pneumatization and 2) to determine the factors affecting sinus pneumatization. Methods: Based on implant treatment records, a list of patients who underwent implant placement on the posterior maxilla was obtained. Among them, patients with pre-extraction and post-extraction (before implant placement) panoramic radiographs were selected. After excluding radiographs with low resolution and image distortion, the radiographs before and after extraction were superimposed using computer software. Subsequently, the extent of sinus pneumatization (the vertical change of the sinus floor) was measured. Simple and multiple mixed models were used to determine the factors affecting sinus pneumatization. Results: A total of 145 patients were eligible for the present investigation. The average extent of sinus pneumatization was 1.56±3.93 mm at 176 tooth sites. Male sex, single tooth extraction, extraction of an endodontically compromised tooth, a class I root-sinus relationship, and sinus membrane thickening >10 mm favored pneumatization, but without statistical significance. The maxillary second molar presented the greatest pneumatization (2.25±4.39 mm) compared with other tooth types. This finding was confirmed in the multiple mixed model, which demonstrated a statistically significant impact of the extraction of a second molar compared with the extraction of a first premolar. Conclusions: Maxillary sinus pneumatization was 1.56±3.93 mm on average. The extraction of a second molar led to the greatest extent of pneumatization, which should be considered in the treatment plan for this tooth site.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1227-1228
• /
• 2010

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.4
• /
• pp.153-163
• /
• 2008

The purpose of this study was to investigate the quality of life of clients who treated and equipped prosthesis in Eulji University Hospital in Dae-Jun City. The results of this study were as follows. The oral status of Female had more carious tooth than male had. Carious tooth(p<0.05) and losed tooth(p<0.001) was more popular in older female. The frequency of treated tooth was higher under 59 years old female than over 60 years old(p<0.01). In education category, carious tooth(p<0.05) and losed tooth(p<0.000) was more popular in low education than high education In the score of relation of OHIP-14 category and general characteristic, female was significantly higher than male in dysfunction( p<0.05), physical disorder(p<0.001) and activity disorder(p<0.05). The score was significantly higher in older than younger in dysfunction(p<0.05), physical disorder(p<0.001) and activity disorder(p<0.001). The score of education was significantly higher in low education group than high education group in physical pain (p<0.001), mental discomfort (p<0.001). The score of marriage status was significantly higher in marriaged group than other group in dysfunction (p<0.05) and mental discomfort (p<0.05). In the score of relation of OHIP-14 category and oral status, the score of carious tooth group was significantly higher in dysfunction(p<0.05), physical disorder(p<0.05) and activity disorder(p<0.05). The score of losed tooth group was significantly higher in dysfunction(p<0.05), physical pain (p<0.05), mental discomfort(p<0.05), physical disorder(p<0.05) and activity disorder(p<0.01). The score of non treated tooth group was significantly higher in dysfunction(p<0.05), mental discomfort(p<0.05), social disorder(p<0.05) and activity disorder(p<0.05). In the score of relation of OHIP-14 category and the sort of prosthesis, the score of being bridge group was significantly higher than being crown group in activity disorder(p<0.05). The OHIP-14 category and the number of prosthesis was not significant relationship. These results suggest that the information and services of the process of dental prosthesis based on subjective evaluation should be provided to clients rather than based on clinical evaluation. The continued system of oral management should be developed and provided.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.6
• /
• pp.923-938
• /
• 2011

Objectives : This study was attempted in order to grasp oral health level according to socio-demographic characteristics in elders in some communities, and to evaluate oral health status and its association. Methods : The subjects in this study were performed with 235 people, who were over 65 years and resided in Daejeon Province, from June 20 to July 10, 2011. An individual interview was held, and they got a dental checkup. As for data analysis, chi-square test, t-test, one-way ANOVA, pearson correlation were utilized. Methods : The subjects in this study were performed with 235 people, who were over 65 years and resided in Daejeon Province, from June 20 to July 10, 2011. An individual interview was held, and they got a dental checkup. As for data analysis, chi-square test, t-test, one-way ANOVA, pearson correlation were utilized. Results : The older age in the whole research subjects and the lower educational level led to the less remaining teeth and the larger missing teeth index. The decayed missing filled teeth index and the decayed missing filled teeth rate were higher in more women and older age and in the lower educational level. Tooth mortality rate was higher in the older age, the lower educational level, and the group of living together with spouse. The maxillary-mandibular fixed-bridge status in the mouth was indicated to be the highest in the full-denture mounting ratio as for elders in over 80 years old. Oral Health Impact Profile(OHIP-14) average score was $56.05{\pm}11.64$ in the whole research subjects The decayed missing filled teeth index and the decayed missing filled teeth rate showed significantly positive correlation with the decayed missing filled teeth rate, tooth mortality rate and showed significantly negative correlation with OHIP-14. Tooth mortality rate showed significantly negative correlation with OHIP-14 Oral Health Impact Profile(OHIP-14) showed significantly positive correlation with its factors. Conclusions : Accordingly, the policy effort is considered to be necessary that implements in elders in order to spend active senescence, and that elders' health and oral-health behavior can be implemented continuously and preventively through classification according to elders' physical function.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1096-1101
• /
• 2000

In machine tools, often a gearbox is installed to control the rotating speed of spindle, which sometimes generates problems of noise and vibration due to errors in tooth-meshing. In this study, the characteristics of, noise and vibration of given gearbox for a machine tool are analyzed experimentally. From the measurement, it was observed that the tooth-meshing component of the sound pressure level from the gearbox took its maximum at a specific operational speed. Therefore, the main content of this study is to investigate the reason why the above mentioned characteristics are observed. By investigating the natural frequencies of the components in gearbox, it was found that the natural frequencies of the rotating gear-shaft and gearbox for twisting mode were closely related to the first and second peak of sound pressure levels respectively. Thereform, in this study, those relations were identified by the impact test of rotating gear-shaft and-gearbox. In addition, we inserted the rubber between housing and bed, and analyze the effect of the rubber insertion on noise reduction by Operational Deflection Shapes.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.6
• /
• pp.475-483
• /
• 2015

PURPOSE. The objective of this study was to evaluate the influence of various cement types on the stress distribution in monolithic zirconia crowns under maximum bite force using the finite element analysis. MATERIALS AND METHODS. The models of the prepared #46 crown (deep chamfer margin) were scanned and solid models composed of the monolithic zirconia crown, cement layer, and prepared tooth were produced using the computer-aided design technology and were subsequently translated into 3-dimensional finite element models. Four models were prepared according to different cement types (zinc phosphate, polycarboxylate, glass ionomer, and resin). A load of 700 N was applied vertically on the crowns (8 loading points). Maximum principal stress was determined. RESULTS. Zinc phosphate cement had a greater stress concentration in the cement layer, while polycarboxylate cement had a greater stress concentration on the distal surface of the monolithic zirconia crown and abutment tooth. Resin cement and glass ionomer cement showed similar patterns, but resin cement showed a lower stress distribution on the lingual and mesial surface of the cement layer. CONCLUSION. The test results indicate that the use of different luting agents that have various elastic moduli has an impact on the stress distribution of the monolithic zirconia crowns, cement layers, and abutment tooth. Resin cement is recommended for the luting agent of the monolithic zirconia crowns.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.1-8
• /
• 2017

This paper concerns the possibility of 3D printing reverse idle gears for tractor transmission. For the purposes of this experiment, idle gears were manufactured using a SLA 3D printer, FDM 3D printer, and through machining. The accuracy of the idle gears produced in these three different ways were evaluated by the properties of their outer diameter, inner diameter, roundness, concentricity, parallelism, span, backlash, and gear grade. The tooth characteristics of the idle gears were evaluated by their profile, lead, and the pitch of the gears. The results of this experiment determined that the surface conditions created by the finishing process had a significant impact on the dimensional accuracy of the gears and the characteristics of their teeth.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.6
• /
• pp.422-427
• /
• 2020

Management of maxillofacial trauma includes primary care, in which diagnosis and management of dentoalveolar injury play a vital role. Due to the impact sustained during a maxillofacial injury (whether direct or indirect), dentoalveolar injuries can occur, leading to fracture and displacement of teeth and associated alveolar bone into the surrounding soft tissues and associated structures, such as the maxillary sinus, nasal cavity, upper respiratory tract, tracheobronchial tree, or gastrointestinal tract. Undiagnosed displaced teeth may cause complications such as airway obstruction. This paper reports a case of displaced teeth in the nasal cavity and gastrointestinal tract and highlights the management protocol for displaced teeth secondary to maxillofacial trauma.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.5
• /
• pp.333-343
• /
• 2019

Objectives: This study aimed to evaluate the association between dental implants and cognitive function in community-dwelling older adults. Methods: Data were collected from the baseline survey (2016-2017) of the Korean Frailty and Aging Cohort Study. The study sample comprised 1115 community-dwelling people aged 70 years to 84 years who had 0-19 natural teeth. Dental implants and natural teeth were identified by panoramic radiography, while the cognitive function was assessed by the Korean version of the Mini-Mental State Examination (MMSE-KC). The association between dental implants and cognitive function was analyzed by multiple linear regression. Sensitivity analysis was performed to test for potential bias. Results: The mean number of natural teeth in the study population was 9.50 (standard deviation [SD], 6.42), and the mean MMSE-KC score was 24.93 (SD, 3.55). In the simple univariate analysis, tooth replacement, age, sex, smoking status, alcohol consumption, body mass index, osteoporosis, number of natural teeth, periodontitis, chewing discomfort, tooth-brushing frequency, education level, monthly household income, participation in economic activity, living alone, and marital status had a significant impact on the association. After adjusting for confounders, the association between dental implants and cognitive function remained significant (B, 0.85; standard error, 0.40; p<0.05). Age, body mass index, periodontitis, tooth-brushing frequency, and education level were also significantly associated with cognitive function. The results of the sensitivity analyses were consistent with those of the primary analysis. Conclusions: Dental implants were associated with cognitive function in older adults living in the community. Dental implants as tooth replacements may play a role in preserving cognitive function.

• The korean journal of orthodontics
• /
• v.43 no.4
• /
• pp.193-200
• /
• 2013

Objective: To evaluate the psychosocial impact of malocclusion, determine its relationship with the severity of malocclusion, and assess the influence of gender and social class on this relationship in adolescents. Methods: A random sample of 627 Spanish adolescents aged 12 - 15 years underwent intraoral examinations by 3 calibrated examiners (intraexaminer and interexaminer kappa > 0.85) at their schools. Psychosocial impact was measured through a self-rated Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ). The severity of malocclusion was measured by the Index of Orthodontic Treatment Need (IOTN). Gender and social class were also recorded. Results: The total PIDAQ score and those of its 4 subscales, social impact, psychological impact, aesthetic concern, and dental self-confidence, presented significant differences ($p{\leq}0.05$ by analysis of variance) and linear relationships with the IOTN grades ($p{\leq}0.05$ by linear regression). Stepwise linear regression models showed that the IOTN dental health component was a predictive variable of the total and subscale PIDAQ scores. Neither gender nor social class was an independent predictive variable of this relationship, except the linear model for psychological impact, where gender was a predictive variable. The occlusal conditions responsible for higher PIDAQ scores were increased overjet, impeded eruption, tooth displacement, and increased overbite. Conclusions: Malocclusion has a psychological impact in adolescents and this impact increases with the severity of malocclusion. Social class may not influence this association, but the psychological impact seems to be greater among girls.