• 지식경영연구
• /
• 제18권4호
• /
• pp.137-157
• /
• 2017

With the rapid growth of the internet, Social Network Services (SNSs) have played an important role. As the use of SNSs increases, users experience a sense of responsibility to respond to other people's messages or requests, and consequently experience an social overload, feeling too much social support for other users. In this study, we examined the effects of social overload on loneliness and SNS discontinuous usage intention. To verify the research model, data were collected from 83 SNS users and analyzed using SmartPLS, a structural equation modeling tool. The results of this study showed that the communal orientation and the degree of use of SNS influenced the social overload, and the social overload had a significant effect on loneliness and SNS discontinuous usage intention. The findings of this study are expected to help understand the social overload and loneliness in the use of SNS, and may also provide a strategic direction for SNS service providers.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.150-156
• /
• 1996

Static variations of cutting forces are estimated using spindle motor current. Static sensitivity of spindle motor current is higher than feed motor current. The linear relationship between the cutting force and RMS value of the spindle motor current is obtained. Using cutting force estimation, tool overload in milling process can be well detected, and cutting force is regulated at a constant level by feedrate adaptive control.

• 산경연구논집
• /
• 제9권9호
• /
• pp.35-44
• /
• 2018

Purpose - In endless competition, companies pursue cost reduction and work efficiency. So, entrepreneurs try to increase job intensity, which may lead to job stress and high turnovers because of job burnout. But, Information systems are acknowledged as a work support tool that secures work convenience and the productivity of employees. In this study, we aimed to confirm the effects of information systems in reduing the work overload of employees in a human resource intensive industry. Research design, data and methodology - This is based on the job demands-resources model, conducting an empirical analysis of surveys given to hospital employees working in a human resource intensive industry. Results - The research revealed that information systems reduced the work overload of employees in a human resource intensive industry. Conclusion - This study confirmed the effects of information systems as a job resource based on JD-R theory, and presentation of empirical results indicated that information systems alleviate employee job overload and increases job satisfaction in the medical services industry. In the medical services industry, using electronic health record system decreases in work overload, which results in employees gaining time for self-development and time management, reducing job stress, and leading to job satisfaction.

• Clinical and Experimental Pediatrics
• /
• 제50권11호
• /
• pp.1041-1048
• /
• 2007

Not a few patients in children and adolescents are suffering from right ventricular (RV) dysfunction resulting from various conditions such as chronic lung disease, left ventricular dysfunction, pulmonary hypertension, or congenital heart defect. The RV is different from the left ventricle in terms of ventricular morphology, myocardial contractile pattern and special vulnerability to the pressure overload. Right ventricular failure (RVF) can be evaluated in terms of decreased RV contractility, RV volume overload, and/or RV pressure overload. The management for RVF starts from clear understanding of the pathophysiology of RVF. In addition to correction of the underlying disease, management of RVF per se is very important. Meticulous control of volume status, inotropic agents, vasopressors, and pulmonary selective vasodilators are the main tools in the management of RVF. The relative importance of each tool depends on the individual clinical status. Medical assist device and surgery can be considered selectively in case of refractory RVF to optimal medical treatment.

• 한국의류학회지
• /
• 제40권2호
• /
• pp.287-304
• /
• 2016

This study examines the influence of product classification standards and structure on user perception as well as their attitude towards online shopping sites. The causal relationships of variables are also examined. The analysis was based on an online survey with 247 responses. Four types of internet shopping sites were developed and used as a stimulus. The results of the mean comparison analysis indicated that perceived variety, information overload, perceived shopping value and attitude towards the site varies significantly with product classification standards and structure. There was also of a marginally significant interaction between the classification standard and structure on perceived variety and information overload. The causal relationship analysis revealed that perceived variety positively influenced hedonic and utilitarian shopping value. However, information overload had a negative effect on hedonic and utilitarian shopping value. Both the hedonic and utilitarian shopping value positively influenced attitudes towards the sites. This study demonstrates that classification method influences customer perception and attitude. It offers interesting insights on a product classification method as a strategic tool for online shopping.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1121-1127
• /
• 2016

In this paper, modeling of overcurrent relay(OCR) to protect domestic AC electric railway Auto Transformer(AT) feeding system and operation characteristic analysis on overload condition are described. The target system of this paper is actual site where overload trip of circuit breaker occurs frequently. Because this AT feeding system is made of parallel single track which had a load(electric train) respectively, and is connected with only T phase of Scott Transformer. In addition, this system has been feeding 66kV voltage by KEPCO, not 154kV. We focus on protective coordination of Scott Transformer primary side and secondary side OCR for Korea single track AC electrical railway system in operation currently. We modeled single track AT feeding system and OCR. Also we performed faults and overload analysis for verification of OCR's setting values and system modeling. To analyze above mentioned research, we used PSCAD/EMTDC software tool.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.88-93
• /
• 1997

Ball-end milling process is widely used in the die and mold manufacturing because of suitable for the machining of free-form surface. Pencil cutting can eliminate overload in uncut area caused by large diameter of ball-end mill before finish cutting. As the ball-end mill for pencil cutting is long and thin, it is easily deflected by cutting force. The tool deflection when pencil cutting is one of the main reason of the machining errors on a free-from surface. The purpose of the research is to find out the characteristics of deflected cutter trajectory by eddy-current sensor.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.75-79
• /
• 2002

A hydraulic Excavator is applied for outdoor tasks in construction, agriculture and undersea etc. When a hydraulic Excavator works crane function tasks, most of disasters happen. In this study, In order to preventing these disasters, the safety equipment algorithm for crane working is developed, and the safety equipment algorithm for crane working is being developed. The proposed control algorithm(Zero Moment Point) is designed to avoid overload. The hydraulic excavator for crane function must work within a maximum limit of load. To accurately detect a working load, pressure sensors of boom, arm cylinder, and angle sensors of boom, arm and bucket joint are used.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(3)
• /
• pp.63-66
• /
• 2000

WBI provides new opportunities to realize the flexible learning environment based on hypermedia and to support distance learning with a diverse interaction. The instructors or learners in WBI claim to be able to resolve reluctant fluctuations such as disorientation and cognitive overload. To overcome these phenomena, a supplementary tool able to manage learning space organized by the instructor's or learner's own way and offer effective navigation techniques is presented in this paper. A learning space management and navigation tool called HyperMap dynamically represents the learning space in the form of a two-dimensional labeled graph. This HyperMap also can be used for an instruction design tool, learner's portfolio for the exchange of learning experiences. and the assessment of WBI.

• 대한간호
• /
• 제28권1호
• /
• pp.77-88
• /
• 1989

The purpose of this study is to propose the baseline data for -developing the occupational stress measurement tool for Psychiatric nurses Working in the hospital. 135 staff nurses in psychiatric unit of 11. hospital were participated during the period from August 1 to August 20, 1988. Though the pretest and literature review a questionnaire was coristructed with 88 stressors which were experienced by the psychiatric nurses in the hospital. Subjects were given instruction to rate 1~6 likert type scale according to the level of stress experienced by each stressor described. Reliability of the tool was tested by Cronbach's Alpha and the reasult was ${\alpha}=0.94871$. Factor analysis was applied to organize 88 items together: As the result, 14 factors were obtained. The factors were; 1) Administration problem 2) Work overload 3) Role conflict as a profession 4) Lack of professional knowledge and skill 5) Conflict with nurses 6) Conflict with other health teams 7) Conflict in nurse-clint relationship 8) Conflict with supervisor 9) Conflict with suborinate 10) Low reward 11) Scheduling probrem 12) Inappropriate physical environment 13) Staff inadequate 14) Inadequate of equipment.