• Earthquakes and Structures
• /
• v.17 no.1
• /
• pp.91-99
• /
• 2019

Fragility analysis is an effective tool that is frequently used for seismic risk assessment of bridges. There are three different approaches to derive a fragility curve: experimental, empirical and analytical. Both experimental and empirical methods to derive fragility curve are based on past earthquake reports and expert opinions which are not suitable for all bridges. Therefore, analytical fragility analysis becomes important. Nonlinear time history analysis is commonly used which is the most reliable method for determining probabilistic demand models. In this study, to determine the probabilistic demand models of bridges, time history analyses were performed considering both material and geometrical nonlinearities. Serviceability limit states for three different service velocities were considered as a performance goal. Also, support displacements, component yielding and collapse limits were taken into account. Both serviceability and component fragility were derived by using maximum likely hood methods. Finally, the seismic performance and critical members of the bridge were probabilistically determined and clearly presented.

• Journal of Veterinary Clinics
• /
• v.29 no.1
• /
• pp.78-81
• /
• 2012

A 5-year-old male Pointer dog weighing 24 kg was referred because of a chronic cough. The dog was routinely vaccinated and treated monthly with medications to prevent heartworm and endoparasites. Blood analyses revealed no abnormalities. Chest radiographs showed interstitial and bronchial patterns in the caudal lung fields. Bronchoscopic imaging identified a collapse of the left bronchus with a mucopurulent discharge, indicating the onset of bronchomalacia. Computed tomography also showed bronchial collapse and a tapering angle in the left caudal bronchus. This case study describes the diagnosis of bronchomalacia in a Pointer dog with a chronic cough, and suggests that bronchoscopic examination is a valuable tool for identifying of the onset of bronchomalacia in dogs presenting with an uncontrolled cough.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.3
• /
• pp.183-191
• /
• 2003

A four-story reinforced concrete moment resisting frame damaged from an ultimate limit state earthquake is upgraded with prestressing cable bracing. The purpose of this study is to investigate the bracing configuration effects on the 3-D building response using thee different locations of the bracing systems for the retrofitted building. Since the previous work done by the author proved that static incremental loads to collapse analysis as a substitute to dynamic non-linear time history analysis was a valid alternative tool. Thus, static load to collapse analysis is solely applied to evaluate the seismic performance parameters of both the original and upgraded buildings in this study. In results, the exterior bracing system is effective in restraining torsional behavior of the structure under seismic loads, and no sudden failure occurs in this system that enhances the ductility of the building due to the gradual change of building stiffness as the lateral load increases.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.751-758
• /
• 2002

Boreholes that are drilled in soft or unconsolidated materials such as gravels and coals are prone to collapse. To maintain the hole, some kinds of casing pipes are needed. If thereby a plastic pipe e.g. PVC is used for the casing, Televiewer tool is still capable of detecting structural features such as fractures in the borehole wall behind the pipe, whereas other borehole-imaging logging devices such as BIPS (Borehole Image Processing System) and FMS(Formation Micro Scanner) won't provide any information about that. Televiewer's primary component is a piezoelectric transducer centered in the hole. It acts as both a transmitter and receiver, and sends an ultrasonic beam. That is reflected, in the same manner as the seismic wave propagation, from the both sides(inner and outer surfaces) of the casing pipe, transmits through the pipe and then reflected from the borehole wall. With an appropriate choice of time-windowing, it is possible to capture the returning signals from both the borehole wall and the outer side of casing pipe as well. A suite of laboratory tests were performed on various physical models composed of plastic pipes with different diameters. Although the amplitudes of returning signals were reduced to about half the usual value due to the transmission loss, the dynamic range of Televiewer tool was sufficient to observe the structural features behind the casing pipe. Besides, several representative case studies at various research areas in our country are presented. The results demonstrate the usefulness of the transmissivity of Televiewer acoustic km, which will assist in further structural interpretation.

• Journal of Environmental Impact Assessment
• /
• v.6 no.2
• /
• pp.103-112
• /
• 1997

The object of this study is the introduction and the application of Ecological Footprint(EF) for sustainability of regional people activities. It is a tool for the evaluation of specific projects through various lifestyles or consumption to area of broad policy and budgets. But in Korea there is no assessment for consumption level of human activities by EF. Therefore this study try to analyse ecologically productive land for human activities of Cheju-island in order to assess the sustainability in Cheju and compares with another industrized countries. We analyze the human activities level of Cheju-island then the EF is about 0.9(ha/cap). This value is not more than another countries like Canada and United States. EF assists in choosing technologies, policies and Life Cycle Assessment(LCA) which can perform a certain task with the smallest ecological footprint. It will help society to avoid collapse and move towards sustainability and ecological efficiency.

• Journal of Chest Surgery
• /
• v.26 no.3
• /
• pp.209-213
• /
• 1993

The pathogenesis of the primary spontaneous pneumothorax is the rupture of subpleural bleb or bullae and subsequent sudden collapse of the affected lung. Mostly, the bullae or blebs are present bilaterally, but detecting the number, size, and location of the causating foci by plain chest film is quite difficult . We have performed chest CT scans for detecting the bullous lesions in 33 cases of primary spontaneous pneumothorax, and compared the results with surgical findings.1. Seventy-four blebs were identified in the chest CT scan, and 100 blebs or bullae were detected surgically [ Sensitivity was 0.74 ].2. Diagnosis rate was 80% [40/50] at right upper lobe, 75.7% [28/37] at left upper lobe, 55.6% at right lower lobe, and 25.0% at left lower lobe, respectively.3. Blebs or bullae smaller than 1 cm of its diameter were detected by 57.1% [24/42] of sensitivity, and in the cases of size larger than 1 cm, it revealed 86.2% [50/58] of sensitivity respectively.4. Of the 45 cases, 7 cases were false negative [15.6%], most of these were ruptured or small size [< 0.5 cm]. 5. One case was false positive, which was irregular adhesion at the apex of the lung.6. We could detect blebs or bullae with preoperative CT scans in 84.4% [38/45] of total patients. In conclusion, chest CT scan is a very advantageous diagnostic tool for proper management and preventing recurrence of primary spontaneous pneumothorax patient.

• Earthquakes and Structures
• /
• v.6 no.6
• /
• pp.581-609
• /
• 2014

Reinforced concrete (RC) structures are likely to experience damage when subjected to earthquakes. Damage index (DI) has been recognised as an advanced tool of quantitatively expressing the extent of damage in such structures. Last 30 years have seen many concepts for DI proposed in order to calibrate the observed levels of damage. The current research briefly reviews all available concepts and investigates their relative merits and limitations with a view to proposing a new concept based on residual deformation. Currently available DIs are classified into two broad categories - non-cumulative DI and cumulative DI. Non-cumulative DIs do not include the effects of cyclic loading, whilst the cumulative concepts produce more rational indication of the level of damage in case of earthquake excitations. Ideally, a DI should vary within a scale of 0 to 1 with 0 representing the state of elastic response, and 1 referring to the state of total collapse. Some of the available DIs do not satisfy these criteria. A new DI based on energy is proposed herein and its performances, both for static and for cyclic loadings, are compared with those obtained using the most widely accepted DI in literature. The proposed DI demonstrates a rational way to predict the extent of damage for a number of case studies. More research is encouraged to address some identified issues.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.782-787
• /
• 2001

This paper is concerned with the global rupture of a nuclear reactor pressure vessel(RPV) in a severe accident. During the severe reactor accident of molten core, the temperature and the pressure in the nuclear reactor rise to a certain level depending on the initial and subsequent condition of a severe accident. While the rise of the temperature cause the thermal softening of RPV material, the rise of the internal pressure could cause failure of the RPV lower head. The global rupture of an RPV is simulated by finite element limit analysis for the collapse pressure and mode and this analysis results have been compared with a variation of the internal pressure of RPV. The finite element limit method is a systematic tool to secure the safety criteria of a nuclear reactor and to evaluate the in-vessel corium retention.

• Structural Engineering and Mechanics
• /
• v.45 no.6
• /
• pp.803-819
• /
• 2013

This paper addresses two main issues relevant to the structural assessment of buildings subjected to explosions. The first issue regards the robustness evaluation of steel frame structures: a procedure is provided for computing "robustness curves" and it is applied to a 20-storey steel frame building, describing the residual strength of the (blast) damaged structure under different local damage levels. The second issue regards the precise evaluation of blast pressures acting on structural elements using Computational Fluid Dynamic (CFD) techniques. This last aspect is treated with particular reference to gas explosions, focusing on some critical parameters (room congestion, failure of non-structural walls and ignition point location) which influence the development of the explosion. From the analyses, it can be deduced that, at least for the examined cases, the obtained robustness curves provide a suitable tool that can be used for risk management and assessment purposes. Moreover, the variation of relevant CFD analysis outcomes (e.g., pressure) due to the variation of the analysis parameters is found to be significant.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1539-1542
• /
• 2005

We have introduced polyelectrolyte micro-patterning technique employing agarose plane stamp and a hard substrate having microscale features on its surface. With this method, chemically micropatterned surfaces with both positive and negative functionalities were successfully embedded in well-defined microstructures, and selective impartment of charge functionalities was confirmed by patterning bead bearing surface charge. Furthermore, this technique allows highly sensitive immobilization of protein onto targeted surface simply by endowing functionalities, which extends the potential of its use as a tool for high-throughput protein microarray and proteomics. Because plane agarose stamp is free of structures on its surface, there is no concern for pattern collapse, and the combination of agarose plane stamp with patterned substrate is more suited for selective protein patterning compared with adopting surface-patterned agarose stamp with flat substrate. Our technique using agarose plane stamp and a substrate having microscale features on its surface suggests a range of possible applications, including the micropatterning of biofunctionalized copolymer having polyelectrolyte block, immobilization of micro- and nanoparticle with biofunctionalities such as biotin and streptavidine, and establishing optoelectronic microstructures with micro-beads on various surfaces.