• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1153-1155
• /
• 2017

The Launch Vehicle is made up of one system with several parts gathered together. In order to make the various parts developed in various organizations into one system, it is necessary to confirm all designs at certain point in time. Change after the design fix require controlled process to analyze the impact of the changes, to decide whether or not to make the change, and to verify that the change was implemented as intended. The configuration management procedure implemented in the above manner is also applied to the development process of KSLV-II. The CAD tool and PLM are linked with each other to perform configuration management for the 3D model, 2D drawing, and the configuration identification document.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.284-287
• /
• 2001

In this paper, we designed and implemented a precise pulse motor control chip that generates the parabolic speed pattern. This chip can control step motor[1], DC servo[2] and AC servo motors at high speed and precisely. It can reduce the mechanical vibration to the minimum at the change point of a degree of acceleration. Because the parabolic speed pattern has the continuous acceleration change. In this paper, we present the pulse generation algorithm and the parabolic pattern speed generation. We verify these algorithm using visual C++. We designed this chip with VHDL(Very High Speed Integrated Circuit Hardware Description Language) and executed a logic simulation and synthesis using Synopsys synthesis tool. We executed the pre-layout simulation and post-layout simulation with Verilog-XL simulation tool. This chip was produced with 100 pins, PQFP package by 0.35 um CMOS process and implemented by completely digital logic. We developed the hardware test board and test program using visual C++. We verify the performance of this chip by driving the servo motor and the function by GUI(Graphic User Interface) environment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.2
• /
• pp.17-33
• /
• 1993

This paper is the on-site case study of the shaping of townscape of port towns in Korea. Inchon has been experienced the rapid urbanization after the opening of a port. Inchon is selected because of the relatively rapid process, the apparent event and influence, and the enough referneces of data about the landscape formation and transformation. As the value of historical landscape, it is very significant to study Inchon and the causes of change in townscape depend on the external element-the opening of a port, Japan colonial policy, economic progress, nationwide development. The main purpose of this study is scrutinized the process, the cause and effect, and the contents and the form of shaping of townscape. The result of the interpretation of landscape is never perfect but only a starting point. Finally this study will be applied to the pragmatic task as a basic tool which construct the desirable image of the city.

• Journal of Information Technology Services
• /
• v.8 no.4
• /
• pp.17-40
• /
• 2009

This study is to guide to estimate service quality on ITSM operation based on ITIL(IT Infrastructure Library). ITIL v2 and v3 provide how to integrate framework of IT service and business process. It is widely used as ITSM operation base. As a latest IT trend, ITSM covers Hardware, Software, SaaS, Network, Call center, Helpdesk, ASP portal and IT operation. Servicedesk is selected as target area where valid sampling is addressable and service change is rapid. Traditional Helpdesk was focusing on technical support to solve internal IT issues passively. But it was evolved into Service Desk which focus in process and provide integrated service from customer's business view point preventively and proactively. Accordingly outsourcing types business are normally performed by group of professional capability. Service quality is measured under the SLA(Service Level Agreement). This study utilized SERVQUAL model as service quality measuring tool developed by Parasuraman, Zeitaml and Berry to find critical factors to satisfy customer. And test was processed regarding effectiveness of IT organization and customer view point thru sampling. Though valid parameters can be changed by ITSM areas under the SERVQUAL models, they naturally can be accepted as a index of service quality measurement after sampling test with acceptable significance. And I recommend to follow this study as a preparation before official SLA.

• Journal of Korean Society for Quality Management
• /
• v.35 no.2
• /
• pp.37-44
• /
• 2007

Today, the statistical process control (SPC) in manufacture environment is an important role at the process by the productivity improvement of the manufacturing systems. The control chart in this statistical method is widely used as an important statistical tool to find the assignable cause that provoke the change of the process parameters such as the mean of interest or standard deviation. But the traditional SPC don't grasp the change of process according to the points fallen the near control limits because of monitoring the variance of process such as the fixed sampling interval and the sample size and handle the cost of the aspect of these sample point. The control chart can be divided into the statistical and economic design. Generally, the economic design considers the cost that maintains the quality level of process. But it is necessary to consider the cost of the process improvement by the learning effects. This study does the economic design in the VSI $\bar X$ control chart and added the concept of loss function of Taguchi in the cost model. Also, we preyed that the VSI $\bar X$ control chart is better than the FSI $\bar X$ in terms of the economic aspects and proposed the standard of the process improvement using the VSI $\bar X$ control chart.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.201-209
• /
• 1998

To develop timely an optimal fan, a design system and a new manufacturing process used step by step have to be integrated. A small sized optimal fan for refrigerators, that was the goal on this project, was developed by the following principal processes. All processes are technologically linked in many directions: The existing fan was measured through reverse engineering. The measured data was used for the basic source of 3D design. The performance tests were carried and used as the data for the evaluation of the existing fan. Flow analysis by FANS-3D/sup [1]/ was performed at the given information (pressure drop and flow rate) to find out the configuration of optimal fan design. The flow patterns were investigated to measure the performance of fan through numerical experiment. The grid point data obtained by the above analysis turned into 3D high efficiency fan model by using CATIA. The product was manufactured by RP process (SLS, SLA) and tested the characteristic curves of the developed fan to compare with the existing fan. The modification of fan design were all examined to see any change in performance and checked to find any deficiency in assembling the fan into a duct. After the plastics flow analysis of the injection molding cycle to ensure acceptable quality fan, an optimal mold was processed by using tool-path for the newly designed fan.

• Journal of Korean Society on Water Environment
• /
• v.36 no.5
• /
• pp.405-422
• /
• 2020

Land use change by urbanization has significantly affected the hydrological process including the runoff characteristics. Due to this situation, it has been becoming more complicated to manage non-point source pollutions caused by rainfall. In order to effectively control non-point sources, it is necessary to identify the reduction efficiency of the various management method based on land use characteristics. Thus, the purpose of this study is to analyze the reduction efficiency of non-point source pollution management practices targeting three different watersheds with the different land use characteristics using the Soil and Water Assessment Tool (SWAT). To do this, the vulnerable subwatersheds to non-point source pollution occurrence within each watershed were selected based on the streamflow and water quality simulation results. Then, considering the land use, low impact development (LID) or best management practices (BMPs) were applied to the selected subwatersheds and the efficiency of each management was analyzed. As a result of analysis of the non-point source pollution reduction efficiency, when LID was applied to urban areas, the average reduction efficiencies of SS, NO₃-N, and TP were 5.92%, 4.62%, and 10.35%, respectively. When BMPs were applied to rural areas, the average reduction efficiencies of SS, TN and TP were 35.45%, 4.37%, and 10.16%, respectively. The results of this study can be used as a reference for determining appropriate management methods for non-point source pollution in urban, rural, and complex watersheds.

• Journal of Labour Economics
• /
• v.37 no.1
• /
• pp.87-116
• /
• 2014

Forecasting of short-term employment fluctuations provides a useful tool for policy makers in risk managing the labor market. Following the process of producing the composite leading indicator for macro economy, the paper develops the employment leading indicator(ELI) for the purpose of short-term forecasting non-farm payroll employment in private sectors. ELI focuses on early detecting the point of time and the speed in phase change of employment level.

• International Commerce and Information Review
• /
• v.4 no.2
• /
• pp.57-76
• /
• 2002

This paper surveys consumer policies for the internet transaction in the developed countries. Recently the internet transaction has been witnessing a remarkable change represented by the rapid spread of "revolution of distribution". It cannot be, however, stated that internet transaction will dominates all the market places without enhancing consumer's reliability in the internet transaction. Many countries made an efforts to the consumer protection in order to develop infra-structure of information industry. We will soon discover a new paradigm that consumer protection is not a tool for development of cyber market but the goal itself. We survey the process of consumer policies discussed in the developed countries and study the point of prevailing arguments of the consumer protection in the internet transaction. The arguments discussed in OECD meetings are debatable, especially, to the degree of government intervention in the field of consumer protection between EU and US. In contrast of US insisted on the minimum intervention of the government, EU suggest the opinion of more aggressive role of government in consumer policy in the cyber market. This paper attempts to provide several guide lines of Korean consumer policy in the cyber market.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.2
• /
• pp.107-112
• /
• 2010

The automation and Cell-Line of manufacturing process are going to be new trend in the industry spot. But workers bodily burden by manual labour is still doing repeatedly at many processes. It is appearing to workers bodily burden (Shoulder, waist, hand, wrist, leg) with repeating works at assembly line which is from the static working space. The analysis with 6 Sigma Tool at specific standard assembly line improve the point at issue for unsuitable items and analyzed objects. Physical pain of worker is solved by the improvement action for the factor of 7 items with the result of analysis. It was known to be improved by solving of workers burden related to the change of 6 Sigma level from 2.16 to 4.1 at assembly line.