• 한국약용작물학회지
• /
• 제14권2호
• /
• pp.107-112
• /
• 2006

Two Atractylodes species, A. japonica Koidz. ex Kitam. (AJ) and A. macrocephala Koidz (AM) were used in this study. AJ population had higher amounts of Sesquiterpenoids and stronger tolerance to root rot but less vigor of root growth than AM population. Two populations (AJ and AM) were crossed to make interspecific hybrid population. A total of 98 lines propagated clonally were selected from a cross of AJ and AM, and evaluated for contents of sesquiterpenoids, atractylon (ATLN) and atractylenolide III (AT3) using high performance liquid chromatography (HPLC), and growth characters such as plant height, stem number and root weight. HPLC profiles of the hybrids were compared with those of parent plants, and it demonstrated the production of introgression hybrid by crossing between AJ and AM. Of 98 clonal lines,10 lines were selected by 10% level based on the growth vigor and tolerance to root rot, and AJM2102-51 line showed the heaviest root weight (117.1 g/plant) among them. A total of 98 hybrid lines contained on average $0.16\;{\pm}\;0.10\;mg/g$ of $AT3,\;2.00\;{\pm}\;1.37\;mg/g$ of ATLN, and $2.16\;{\pm}\;1.40\;mg/g$ of total sesquiterpenoids, showing high coefficients of variation (above 65%). Ten lines having high contents of sesquiterpenoids were selected, and AJM2101-15 had the highest amount (9.83 mg/g) of ATLN, and showed 40.8 g/plant of root weight similar to mean value (39.9 g/plant) of hybrid lines. The result showed that the introgression of both characters of vigorous growth from AM and high sesquiterpenoids content from AJ could be possible to make new hybrid lines by crossing between AJ and AM.

• 한국항공우주학회지
• /
• 제48권7호
• /
• pp.523-528
• /
• 2020

스프링-메스 시스템의 원리를 이용하여 수평 구동형 MEMS 관성 스위치를 설계하였다. 본 MEMS 스위치는 외부에서 발생하는 가속도를 감지하여 점화안전장치를 장전시키는 역할을 한다. 성능 모델링을 통하여 다양한 가속도 조건에서의 구동 양상을 분석하였다. 시뮬레이션 결과 가속도의 기울기가 10g/msec 이하인 경우에 MEMS 스위치는 10g에서 잘 작동하는 것으로 나타났다. 반면에, 설계 변수들의 공차를 10%로 고려한 시뮬레이션 결과 스프링 폭과 길이에 의해 임계 동작 가속도가 규격(10±2g)을 벗어났다. 제작 공정상 10% 이하의 공차 관리가 어려운 스프링 폭을 두 배로 늘렸을 때 규격을 만족하는 것을 확인하고 설계보완을 제안하였다.

• 항공우주기술
• /
• 제8권1호
• /
• pp.42-48
• /
• 2009

복합재 항공기의 경우 인증 시 여러 가지 요소를 고려해야한다. 금속과는 달리 복합재구조물의 감항성은 운용 및 제작 중 발생하는 손상 등에 의해 큰 영향을 받는다. 그러므로 예상 가능한 여러 가지 손상에 대해 정적강도, 강성, 플러터 및 손상허용강도 등을 입증하여 야한다. 복합재료의 기계적물성은 환경조건에 영향을 받는다. 특히 압축강도는 수지의 영향이 지배적이고 수지가 온도와 습도의 영향을 많이 받으므로 설계/해석 시 고려하여야한다. 복합재 항공기의 경우 육안으로 탐지가 어려운 손상에 대한 정적강도를 입증하여야하고, 육안으로 보이는 큰 손상에 대해서는 발견 즉시 수리하도록 규정되어있다. 본 논문에서는 복합재 구조물의 설계/해석에 필요한 규정을 분석하고 해석방법 등에 대해 검토하려한다.

• Archives of Plastic Surgery
• /
• 제38권3호
• /
• pp.245-250
• /
• 2011

Purpose: Composite tissue allotransplantation has emerged as a new therapeutic modality to reconstruct major tissue defects of the head, neck and extremities. A questionnaire-based instrument, the Louisville Instrument for Transplantation (LIFT), has been developed to objectively assess the risk-versus-benefit ratio for composite tissue allotransplantation procedures. The objective of this study is to assess if the LIFT is a useful, reliable and valid tool to apply to the Korean population. Methods: Seventy-three medical students and 60 lay public completed the LIFT questionnaire (translated to Korean) over the period from February 2010 to April 2010. Internal consistency was assessed using Cronbach's alpha. Test-retest reliability was analyzed using Pearson's correlation coefficient. Construct validity was assessed by comparing Pearson's correlation coefficients between perceived improvements in quality of life and responses to risk tolerance questions concerning organ transplants. Results: Measurements of the test-retest reliability showed that Pearson's correlation coefficients ranged from 0.241 to 0.902, and Cronbach's alphas ranged from 0.52 to 0.80 for medical students and from 0.63 to 0.83 for the lay public. Pearson's correlation coefficients showed significant correlations between perceived improvements in quality of life and responses to risk tolerance questions concerning organ transplants. Hand transplant showed a significant correlation in medical students. Foot, hand, two hands, larynx, partial face transplants showed significant correlations for the lay public. Conclusion: The applicability of the LIFT to the Korean population was found to be reliable and valid. The LIFT may serve as a useful tool for clinical application in the Korean population.

• 한국물환경학회지
• /
• 제34권3호
• /
• pp.251-269
• /
• 2018

In 1997, the environmental score (Q) corresponding the tolerance value of Korean benthic macroinvertebrate species and the related biotic score, the ecological score of benthic macroinvertebrates (ESB) were proposed; ESB was similar to Beck's biotic index or Chandler's biotic score. This study was carried out to revise the Q values of individual species and the assessment scheme of ESB based on the taxonomic performance and ecological information accumulated since then. The original ESB was renamed as TESB (total ESB), and AESB (average ESB) was newly proposed. AESB is calculated by dividing the TESB (for a given station) by the number of species present in the sample. In this study, TESB showed a positively skewed distribution, while AESB showed a negatively skewed distribution. The correlation between TESB and the concentration of $BOD_5$ was a little stronger than that of the original ESB. TESB showed a very strong correlation (correlation coefficient r = 0.98) with Margalef's species richness, of which correlation coefficient was higher than that of AESB (r = 0.85). AESB showed a strong correlation (r = -0.79) with the concentration of $BOD_5$, while TESB showed a weaker correlation (r = -0.67). Applying TESB and AESB together in an assessment of the environment may be comprehensive because the physical and chemical states of the environment can be evaluated together. AESB is less dependent on the sample size, while TESB tends to increase as the sample size increases. In the evaluation of the environment using TESB, it is necessary to standardize the methods on monitoring.

• 한국초지조사료학회지
• /
• 제29권1호
• /
• pp.13-18
• /
• 2009

본 시험은 남부지방에 벼 대체 여름 사료작물인 옥수수를 파종하여 조사료를 생산하는데 논 재배에서 적응성 및 생산성이 우수한 품종을 선발할 목적으로 2007년부터 2008년까지 2년간에 걸쳐 전라남도 농업기술원에서 수행하였다. 국내육성 2품종과 도입품종 4품종 등 6품종 을 시험한 결과 광평옥 품종이 간장이 198cm 로 다른 품종들보다 크고 경직경이 굵으며 내습성 및 후기 녹체성이 좋고 우수한 특성을 보였으며 수량 측면에서도 생초수량은 ha당 생초 수량은 38.5톤이며 건물수량은 14톤이고 TDN 수량은 9.6톤으로 P3156, P3394에 비해 최고로 높은 편이지만 이와 같은 수량은 밭 재배에서의 수량에는 다소 미치지 못하는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.869-886
• /
• 2016

Non-Deformable Support System (NDSS) is one of the support system analysis methods. It is likely seen as numerical analysis. Obviously, numerical modeling is the key tool for this system but not unique. Although the name of the system makes you feel that there is no deformation on the support system, it is not true. The system contains some deformation but in certain tolerance determined by the numerical analyses. The important question is what is the deformation tolerance? Zero deformation in the excavation environment is not the case, actually. However, deformation occurred after supporting is important. This deformation amount will determine the performance of the applied support. NDSS is a stronghold analysis method applied in full to make this work. While doing this, NDSS uses the properties of rock mass and material, various rock mass failure criteria, various material models, different excavation geometries, like other methods. The thing that differ NDSS method from the others is that NDSS makes analysis using the time dependent deformation properties of rock mass and engineering judgement. During the evaluation process, NDSS gives the permission of questioning the field observations, measurements and timedependent support performance. These transactions are carried out with 3-dimensional numeric modeling analysis. The goal of NDSS is to design a support system which does not allow greater deformation of the support system than that calculated by numerical modeling. In this paper, NDSS applied to the problems of Tunnel 34 of the same Project (excavated with NATM method, has a length of 2218 meters), which is driven in graphite schist, was illustrated. Results of the system analysis and insitu measurements successfully coincide with each other.

• 한국광학회지
• /
• 제16권3호
• /
• pp.201-208
• /
• 2005

조명각 변조 방식에 의한 3차원 입체영상 표시장치의 구현을 위해 렌티큘라 렌즈가 만족해야할 조건을 확립한 후 근축광선이론으로 렌즈 규격 및 모듈 구조를 설계하였고, 유한광선 추적법(finite ray tracing)을 이용하여 스테레오스코픽 모듈의 규격변화, 조립과정의 정렬오차, 그리고 관찰자의 관찰 조건에 따른 영향을 분석하였다. 이를 통해 신호잡음을 최소화하기 위해 제작 공정에서 렌즈 함몰부가 발생하지 않아야 하며, 평판형 액정 셔터와 렌티큘라 렌즈 판 사이의 어긋남이 최소화되어야 함을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권4호
• /
• pp.396-402
• /
• 2014

함정의 높은 함내소음은 승조원들 간의 의사전달을 방해하여 전투력 저하를 야기하고, 근무환경의 질을 떨어뜨리므로 함내소음 측정은 매우 중요한 관리 항목 중 하나이다. 그러므로 대부분의 신조함정은 인수 시운전 단계에서 함내소음을 측정하고 제시된 기준을 만족하도록 건조되고 있다. 함내소음 측정 결과로부터 기준 만족 여부를 판단하기 위해서는 측정 불확도를 고려하는 것이 반드시 필요하다. 본 논문에서는 함정 인수 시운전시의 함내소음 평가 방법을 소개하고, 함내소음을 평가하기 위한 불확도 추정 방법을 적용하였다. 신조 함정 7척에 적용한 결과, 함내 소음 불확도는 1dB 이하로 오차가 시운전 평가서 허용 오차(2dB) 내에 있음을 확인하였다. 현재 실험방법은 허용기준을 만족하고는 있지만 보다 신뢰성 있는 측정 결과를 위해 실험 방법 등의 개선으로 허용오차를 줄일 필요성이 있을 것으로 판단된다.

• Journal of Microbiology and Biotechnology
• /
• 제22권7호
• /
• pp.947-959
• /
• 2012

This study was aimed at an evaluation of the potential inheritance of electroporation effects on Lactobacillus fermentum BT 8219 through to three subsequent subcultures, based on their growth, isoflavone bioconversion activities, and probiotic properties, in biotin-supplemented soymilk. Electroporation was seen to cause cell death immediately after treatment, followed by higher growth than the control during fermentation in biotin-soymilk (P<0.05). This was associated with enhanced intracellular and extracellular ${\beta}$-glucosidase specific activity, leading to increased bioconversion of isoflavone glucosides to aglycones (P<0.05). The growing characteristics, enzyme, and isoflavone bioconversion activities of the first, second, and third subcultures of treated cells in biotin-soymilk were similar to the control (P>0.05). Electroporation affected the probiotic properties of parent L. fermentum BT 8219, by reducing its tolerance towards acid (pH 2) and bile, lowering its inhibitory activities against selected pathogens, and reducing its ability for adhesion, when compared with the control (P<0.05). The first, second, and third subcultures of the treated cells showed comparable traits with that of the control (P>0.05), with the exception of their bile tolerance ability, which was inherited to the treated cells of the first and second subcultures (P<0.05). Our results suggest that electroporation could be used to increase the bioactivity of biotin-soymilk via fermentation with probiotic L. fermentum BT 8219, with a view towards the development of functional foods.