• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.575-584
• /
• 2021

본 연구는 연속행동모니터링시스템(CBMS)을 사용하여 저온 충격에 노출된 참돔 Pagrus major 치어의 행동반응에 대한 임계 수온 및 행동 내성 반응을 규명하였다. 실험생물의 행동은 8.0~20.0℃ 수온구간에서 12시간과 24시간 마다 각각 2.0℃와 4.0℃씩 하강시키며 관찰하였다. 참돔 치어는 12.0℃ 이하로 수온이 하강한 경우 수온 노출시간과 변동 폭에 관계없이 유영활동이 감소하고 정지가 반복되는 불안정한 행동패턴이 관찰되었다. 또한 8.0~10.0℃ 수온에 노출된 생물의 유영능력은 급격히 저하되어 수조 바닥에서 머무르는 아치사 반응 행동을 보였다. 실험어류는 저 수온 스트레스 영향을 받아 생물의 50 %만 생존하였으며, 저온 충격(cold shock) 후 6시간 이내에 모든 개체가 사망하였다. 또한 행동지수(BI)는 급격히 감소하였으며 변이계수(CV)의 진폭변화는 타 수온보다 변동 폭이 큰 것으로 분석되었다(p<0.05). 참돔 치어의 저온 스트레스는 12.0℃를 경계로 촉진되며, 8.0~10.0℃의 저온 충격에 노출된 생물의 아치사 반응을 유발시키는 내성한계인 것으로 해석된다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.25-25
• /
• 2022

Drought becomes frequent and severe because of continuous global warming, leading to a significant loss of crop yield. In soybean (Glycine max [L.]), most of quantitative trait loci (QTLs) analyses for drought tolerance have conducted by investigating yield changes under water-restricted conditions at the reproductive stages. More recently, the necessity of QTL studies to use physiological indices responding to drought at the early growth stages besides the reproductive ones has arisen due to the unpredictable and prevalent occurrence of drought throughout the soybean growing season. In this study, we thus identified QTLs conferring wilting scores and moisture contents of soybean subjected to drought stress in the early vegetative stage using an recombinant inbred line (RIL) population derived from a cross between Taekwang (drought-sensitive) and SS2-2 (drought-tolerant). For the two traits, the same major QTL was located on chromosome 10, accounting for up to 11.5% of phenotypic variance explained with LOD score of 12.5. This QTL overlaps with a reported QTL for the limited transpiration trait in soybean and harbors an ortholog of the Arabidopsis ABA and drought-induced RING-D UF1117 gene. Meanwhile, one of important features of plant drought tolerance is their ability to limit transpiration rates under high vapor pressure deficiency in response to mitigate water loss. However, monitoring their transpiration rates is time-consuming and laborious. Therefore, only a few population-level studies regarding transpiration rates under the drought condition have been reported so far. Via employing an Arduino-based platform, for the reasons addressed, we are measuring and recording total pot weights of soybean plants every hour from the 1^st day after water restriction to the days when the half of the RILs exhibited permanent tissue damage in at least one trifoliate. Gradual decrease in moisture of soil in pots as time passes refers increase in the severity of drought stress. By tracking changes in the total pot weights of soybean plants, we will infer transpiration rates of the mapping parents and their RILs according to different levels of VPD and drought stress. The profile of transpiration rates from different levels of severity in the stresses facilitates a better understanding of relationship between transpiration-related features, such as limited maximum transpiration rates, to water saving performances, as well as those to other drought-responsive phenotypes. Our findings will provide primary insights on drought tolerance mechanisms in soybean and useful resources for improvement of soybean varieties tolerant to drought stress.

• 대한수의학회지
• /
• 제49권3호
• /
• pp.253-256
• /
• 2009

The aim of the present study was to determine the acute and subacute potential of trichlorfon in guppies (Poecilia reticulatus). We first defined the 24 h median tolerance limit ($TLm_{24h}$) of the fish to trichlorfon. Guppies were then treated with $TLm_{24h}$ and 1/10 $TLm_{24h}$ trichlorfon concentrations to evaluate if any histological alterations occurred. The $TLm_{24h}$ value of trichlorfon was 11 ppm. This concentration resulted in acute toxicity to the gills and kidneys with edema, hyperplasia of the gill lamellae, and vacuolated degeneration and necrosis of renal tubular cells. In the case of subacute toxicity using a 10-fold dilution of the $TLm_{24h}$ value (1.1 ppm), no behavioral changes, external lesions or histopathological changes were observed. Therefore, safe concentration of trichlorfon might be 1.1 ppm in guppy for controlling parasitic infections.

• 한국응용곤충학회지
• /
• 제19권3호
• /
• pp.153-155
• /
• 1980

D. dipsaci(마늘구근선충)의 밀도별 피해정도와 피해용 한계수준을 구명코저 폿트시험을 실시하여 다음과 같은 결과를 얻었다. 1. 선충의 기생이 길이 생장에는 영향이 없으나 밀도가 증가할수록 굵기 생장은 떨어졌다. 2. 기주내에서 선충의 증식은 4월 하순 이후 급증하였으며 밀도가 높을수록 증식율은 낮았고 평형밀도는 마늘 1구당 2,000마리 내외인 것 같다. 3. 4월 하순에 선충이 구당 30마리 정도 있으면 $20\%$의 감수를 초래한다.

• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.460-465
• /
• 2004

Hydrofluoric acid has been used as a novel stripping agent for molybdenum(VI) after its extraction with Cyanex 301. In the extraction step, the effects of parameters such as type and initial concentration of acid, type of diluent, extractant concentration, metal concentration and temperature have been studied. In the stripping step, the effects of various stripping agents on stripping efficiency have been investigated. Hydrofluoric acid has been chosen as an effective stripping agent, and the effects of concentration of hydrofluoric acid, stripping time, volume of hydrofluoric acid and the number of stages of stripping have been studied. Molybdenum(VI) has been effectively separated from a large number of elements in binary mixtures, with a very high tolerance limit. Finally, the optimized method has been extended for the analysis of Mo(VI) in spent molybdenum catalysts.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권4호
• /
• pp.467-478
• /
• 2003

Automotive shock absorber may not be regarded as only one(simple) damping machine because it is composed of many components, and shows non-linear damping characteristics. No matter how advanced form of shock absorber is developed, the oil shock absorber can not be neglected. because their structures are based on the oil shock absorber. Therefore it is essential to accurately analyze the dynamic characteristics of oil shock absorber. It stands mainly roi damper valve tuning which nowadays is still exhaustively done by means of ride work. In this study, damping mechanism and dynamic characteristics for oil shock absorber of twin tube type are analyzed, based on the mathematical model considering internal flow and pressure. For the reliability of numerical prediction. the database is constructed within the limit of adequate reliability. Finally, the programmed system that gives out necessary specification by inputting damping specification and tolerance is to be constructed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.71-76
• /
• 2001

In the surface measurement system using touch probe, probe radius compensation is a key factor for accuracy. In this paper we investigate methods for compensating probe radius so that the surface equation for an "unknown surface" can be efficiently derived. The developed algorithm derives the surface equation by the iterative procedure of estimation, verification, and modification . Since the procedure is applied only for the surface region exceeding the tolerance limit, an accurate surface equation can be obtained with less computation and measurement point. The validity and effectiveness of the algorithm was tested by numerical simulations. The results convinced us that the develop algorithm can be used for surface measurement and tool path planning for NC machining.

• 품질경영학회지
• /
• 제5권1호
• /
• pp.3-10
• /
• 1977

The research on the process capability is the basis for quality design, operation standard and so on. In this study, histogram of the measured value for the cutting process and calculation of the capability factor Cp are established, resulting in the classification of 4 grades, and necessary measures for them are presented. The advancement of productivity is the most significant result of this study. The processing time per piece for those stabilized processes having the capability factor 1.33 and above is lessened, and the advancement in quantity capability is made possible permitting dispersion of standard up to the tolerance limit. The exact knowledge of process capability is most important for the quality design system. For the efficient application of this result of the research, a systematic and positive cooperation by the whole company members is needed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.898-902
• /
• 1995

STEP is a neutral model for exchanging CAD modelbetween different CAD systms. The paper presents a laser path contour generation for rapid prototyping originated form STEP format files without using any tools nor libraries for STEP data manipulation. Polygons are generated from every point on the layer of given thickness, which are the intersections of layer plane and edges stored in entity tables. Curves are approximated with polygons whitin segment tolerance limit in order to cover sculptured surfaces. With the advantage of less data loss in direct slicing over STL formats, the system developed in this work shows a good potential to provide data share with various CAD systems including RP data preparation.

• 대한수의학회지
• /
• 제35권4호
• /
• pp.809-814
• /
• 1995

The acute and subacute toxicity of fumomsin $B_1$ was evaluted in fingerlings of common carp, Cyprinus carpio. Dipping of fish for acute toxicity was performed for a period of 48 hours, and the $TLm_{48h}$ value(median tolerance limit) was more than 1000 ppm in common carp. Severe damages were observed in various organs and among them, clubbing of gill lamella, lytic degeneration and vacuolation of liver cells, and epithelial edema of renal tubules were relatively prominent. The most significant changes were hyperbasophilic foci of liver cells in subacute toxicity test and these can imply the possibility of hepatocarcinogenecity of fumonisin $B_1$.