• Molecular & Cellular Toxicology
• /
• v.1 no.3
• /
• pp.189-195
• /
• 2005

Industrial development has increase consumption of crude oil and environmental pollution. A large number of microbial lipolytic enzymes have been identified and characterized to date. To development for a new lipase with catalytic activity in degradation of crude oil as a microbial enzyme, Acinetobactor sp. B2 was isolated from soil samples that were contaminated with oil in Daejon area. Acinetobactor sp. B2 showed high resistance up to 10 mg/mL unit to heavy metals such as Ba, Li, Al, Cr, Pb and Mn. Optimal growth condition of Acinetobactor sp. B2 was confirmed $30^{\circ}C$. Lipase was purified from the supernatant by Acinetobactor sp. B2. Its molecular mass was determined to the 60 kDa and the optimal activity was shown at $40^{\circ}C$ and pH 10. The activation energies for the hydrolysis of p-nitrophenyl palmitate were determined to be 2.7 kcal/mol in the temperature range 4 to $37^{\circ}C$. The enzyme was unstable at temperatures higher than $60^{\circ}C$. The Michaelis constant $(K_{m})\;and\;V_{max}$ for p-nitrophenyl palmitate were $21.8{\mu}M\;and\;270.3{\mu}M\;min^{-1}mg\;of\;protein^{-1}$, respectively. The enzyme was strongly inhibited by $Cd{2+},\;Co^{2+},\;Fe^{2+},\;Hg^{2+},\;EDTA$, 2-Mercaptoethalol. From these results, we suggested that lipase purified from Acinetobactor sp. B2 should be able to be used as a new enzyme for degradation of crude oil, one of the environmental contaminants.

• Journal of the Korean Ceramic Society
• /
• v.27 no.7
• /
• pp.899-906
• /
• 1990

The cordierite powders were prepared from Mg(NO3)2.6H2O, Al(NO3)3.9H2O and colloidal silica by the coprecippitation method, and the sintering behavior of the powders were investigated. Two different methods were applied for producing the precursor powders. The one was to added the aqueous solution of Mg(NO3)2.6H2O and Al(NO3)3.9H2O to NH4OH to adjust pH at 10 where the colloidal silica of pH 10 was added. The other wa to add the aqueous solution of Mg(NO3)2.6H2O and Al(NO3)3.9H2O to the colloidal silica with NH4OH to control the final mixture to be at pH 10. It was confirmed that more homogeneous powders were obtained from the latter method. The firing linear shrinkage of the powder compacts fabricated from the calcined powder between 90$0^{\circ}C$ and 110$0^{\circ}C$ was found to be larger as the calcination temperature was low. But all of them stopped shrinking around 120$0^{\circ}C$. The powder compacts, fabricated using the calcined powders at 90$0^{\circ}C$ and 95$0^{\circ}C$ for 2hours and sintered at 142$0^{\circ}C$ for 2hours, showed relative density of 93-96%, 3-point bending strength of 81-83MPa, KIC of 1.9-2.4 MPam1/2 and thermal expansion coefficient of 0.213-0.732$\times$10-6$^{\circ}C$.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.4
• /
• pp.326-332
• /
• 2023

The high cost of Si-based solar cells remains a substantial challenge to their widespread adoption. To address this issue, it is essential to reduce the production cost of solar-grade Si, which is used as raw material. One approach to achieve this is Si electrodeposition in molten salts containing Si sources, such as SiO₂. In this study, we present the pulse electrodeposition of Si in molten CaCl₂ containing SiO₂ nanoparticles. Theoretically, SiO₂ nanoparticles with a diameter of less than 20 nm in molten CaCl₂ at 850℃ have a comparable diffusion coefficient with that of ions in aqueous solutions at room temperature. However, we observed a slower-than-expected diffusion of the SiO₂ nanoparticles, probably because of their tendency to aggregate in the molten CaCl₂. This led to the formation of a non-uniform Si film with low current efficiency during direct current electrodeposition. We overcome this issue using pulse electrodeposition, which enabled the facile supplementation of SiO₂ nanoparticles to the substrate. This approach produced a uniform and thick electrodeposited Si film. Our results demonstrate an efficient method for Si electrodeposition in molten CaCl₂ containing SiO₂ nanoparticles, which can contribute to a reduction in production cost of solar-grade Si.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1314-1318
• /
• 2010

The $[Ru(tpy)_2]Cl_2$ (tpy:2,2':6',2"-terpyridine) complex was synthesized and its structure was confirmed by $^1H$-NMR and elemental analysis. Its binding mode toward DNA was compared with the well-known $[Ru(bpy)_3]Cl_2$ (bpy:2,2-bipyridyl), using isotropic absorption, linear dichroism(LD) spectroscopy, and an energy minimization study. Compared to $[Ru(bpy)_3]^{2+}$, the $[Ru(tpy)_2]^{2+}$ complex exhibited very little change in its absorption pattern, especially in the MLCT band, upon binding to DNA. Furthermore, upon DNA binding, both Ru(II) complexes induced a decrease in the LD magnitude in the DNA absorption region. The $[Ru(tpy)_2]^{2+}$ complex produced a strong positive LD signal in the ligand absorption region, which is in contrast with the $[Ru(bpy)_3]^{2+}$ complex. Observed spectral properties led to the conclusion that the interaction between the ligands and DNA bases is negligible for the $[Ru(tpy)_2]^{2+}$ complex, although it formed an adduct with DNA. This conclusion implies that both complexes bind to the surface of DNA, most likely to negatively charged phosphate groups via a simple electrostatic interaction, thereby orienting to exhibit the LD signal. The energy minimization calculation also supported this conclusion.

• Fire Science and Engineering
• /
• v.19 no.2 s.58
• /
• pp.37-44
• /
• 2005

We have conducted a numerical simulation under three-dimensional unsteady conditions in order to analyze the characteristics of flow and the distribution of $CO_2$ agent concentration according to the number of $CO_2$ agent nozzle. The engine room of a ship was selected as a protection space, and flow fields and $CO_2$ concentration fields were measured. In case of increasing the number of $CO_2$ nozzle from 2 nozzles to 4 nozzles, the distribution of CO2 concentration showed low, and in case of increasing the number of $CO_2$ nozzle to above 6 nozzles, the recirculating flow affected to all region was generated. In case of increasing the number of $CO_2$ agent nozzle to above 4 nozzles, the iso-concentration line below 0.36 expanded or contracted slightly. Therefor, the proper number and the arrangement of $CO_2$ agent nozzle are considered when $CO_2$ fire fighting system is designed.

• Journal of Environmental Health Sciences
• /
• v.21 no.3
• /
• pp.107-114
• /
• 1995

To assess the contribution of automobile exhaust to indoor and outdoor levels of $NO_2$ around a major trunk road in Tokyo, $NO_2$ levels of 200 homes were measured at living rooms, kitchens and outdoor at each season, from the summer of 1990 to the spring of 1991, $NO_2$ level was measured for four days using diffusion $NO_2$ dosimeter. Outdoor $NO_2$ levels at each season and indoor $NO_2$ levels at seasons when heaters were not used decreased according to the distance from the roadside. The differences between $NO_2$ levels at zone I(within 20m from the roadside) and zone III(beyond 50m) was about 3 ppb. Automobile exhaust seemed to contribute to this difference. At seasons when heaters were used, indoor $NO_2$ levels of the homes equipped with vented heater, decreased according to the distance from the roadside. However, there was no correlation between indoor levels and the distance from the roadside at homes equipped with unvented heater.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.4
• /
• pp.333-342
• /
• 1998

Plasma process has great possibilities to remove SOx, NOx simultaneously with high treatment efficiency and is expected to be suitable for small or middle plants. It was accomplished to evaluate SO2, NOx control possibility and achieve basic data to control pollutants by use of Surface Discharge Induced Plasma Chemical Process (SPCP) in this study. O3 generation characteristics by discharge of a plate was proportional to O2 concentration and power consumption and inversely proportional to temperature and humidity, In case of dry air, NOx was highly generated by N2 and O2 in air during the plasma discharge process but it was decreased considerably as H2O was added. SO2 removal efficiency was very high, and removal rate was 170,350 mEA at 30,50 watt respectively in flue gas which is usually contain HIO. NOx removal efficiency was about 57% at 40 watt power consumption with 7.5% humidity. It is estimated that H2O has an important role in reaction mechanism with pollutants according to plasma discharge.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.1 no.2
• /
• pp.173-191
• /
• 1994

This descriptive-correlational study was conducted to exam if there were relation between noise level and reaction to noise of inpatient. The purpose of this study was to provide a basic data for comfort of patient hospitalized. The hypotheses of the study are : 1. The higher perceived noise level of inpatient, the higher reaction level to noise. 2. The higher perceived noise level of inpatient, physiological reaction level to noise. 3. The higher perceived noise level of inpatient, the higher emotional reaction level to noise. The participant were 153 patients hospitalized in one general hospital. The research instruments used for this study were noise scale and reaction of patient scale developed by the author. Data was collected over a period of 10 days from the 9th of July to the 18th of July, 1994. Statistical analysis of the data included percentage, t-test, ANOVA and Scheffe test. Examination of the hypotheses was done by use of pearson correlation coefficient. The results are summarized as follows ; 1. The mean score of noise level was 2.24. Among noise factors reported by the subjects, that which ranked highest was 'Conversation of Visitors'(2.82). Next were 'noise of handling receptacle'(2.73), 'the others noise from outside'(2.73) and 'Conversation of supporter'(2.71). 2. The mean score of reaction level to noise was 2.19, physiological reaction level 2.04 and emotional reaction level 2.37. Among Physiological reaction to noise reported by the subjects, that which ranked highest was 'tired'(2.39). Next were 'sweating'(2.22) and 'headache'(2.20). Among emotional reaction to noise reported by the subjects, that which ranked highest was 'to irritate nerve'(2.53). Next were 'disturbing rest'(2.51) and 'to disturb sleep'(2.46). 3. The relationship between perceived noise level of inpatient and reaction to noise was statically significant (r=0.599, p=.0001). The relationship between perceived noise level of inpatient and physiological reaction to noise was statically significant (r=0.554, p=.0001). The relationship between perceived noise level of inpatient and emotional reaction to noise was statically significant(r=0.535, p=.0001). Thus hypothese 1, 2, 3 were supported. 4. There were significant differences between noise level of inpatient, admission periods, mobility of physical condition and exposure level to noise. 5. There were significant differences between physiological reaction level to noise, admission periods, mobility of physical condition and operation Yes or No. 6. There were significant difference between emotional reaction level to noise, admission periods, mobility of physical condition and exposure level to noise.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1265-1272
• /
• 2007

A solid acid catalyst, NiSO4/CeO2-ZrO2 was prepared simply by promoting ZrO2 with CeO2 and supporting nickel sulfate on CeO2-ZrO2. The support of NiSO4 on ZrO2 shifted the phase transition of ZrO2 from amorphous to tetragonal to higher temperatures because of the interaction between NiSO4 and ZrO2. The surface area of 10-NiSO4/1-CeO2-ZrO2 promoted with CeO2 and calcined at 600 oC was very high (83 m2/g) compared to that of unpromoted 10-NiSO4/ZrO2 (45 m2/g). This high surface area of 10-NiSO4/1-CeO2-ZrO2 was due to the promoting effect of CeO2 which makes zirconia a stable tetragonal phase as confirmed by XRD. The role of CeO2 was to form a thermally stable solid solution with zirconia and consequently to give high surface area and acidity of the sample, and high thermal stability of the surface sulfate species. 10-NiSO4/1- CeO2-ZrO2 containing 1 mol% CeO2 and 10 wt% NiSO4, and calcined at 600 oC exhibited maximum catalytic activities for both reactions, 2-propanol dehydration and cumene dealkylation.

• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.330-339
• /
• 1991

The acid properties of $V_2O_5-TiO_2/SiO_2$ catalysts and the partial oxidation of o-xylene into phthalic anhydride had been investigated in order to relate the acid property of catalyst to the catalytic activity. $V_2O_5$ had both weak (V=O) and strong (V-O-V) acid sites which gave pyridine desorption peaks at $230^{\circ}C$ and $300^{\circ}C$, respectively, and the amount of weak acid sites at $230^{\circ}C$ decreased with the increase of calcination temperature. On the other hand, the amount of weak acid sites increased considerably by increasing the amount of $TiO_2$ to the $V_2O_5-TiO_2/SiO_5$, and the maximum value was shown at 20 and higher mole % of $TiO_2$ with respect to $SiO_2$. In the oxidation of o-xylene, $V_2O_5-TiO_2/SiO_2$ enhandced more the total conversion and the selectivity to phthalic anhydride than $V_2O_5/SiO_2$, and the higher $TiO_2$ ratio to $V_2O_5$ increased the total conversion but could not change the selectivity to phthalic anhydride. Weak acid sites (V=O) led o-xylene to partial oxidation producing phthalic anhydride by adsorbing o-xylene weakly, while acid sites (V-O-V) led it to total oxidation producing CO and $CO_2$ by adsorbing it strongly.