• Molecular & Cellular Toxicology
• /
• 제1권3호
• /
• pp.189-195
• /
• 2005

Industrial development has increase consumption of crude oil and environmental pollution. A large number of microbial lipolytic enzymes have been identified and characterized to date. To development for a new lipase with catalytic activity in degradation of crude oil as a microbial enzyme, Acinetobactor sp. B2 was isolated from soil samples that were contaminated with oil in Daejon area. Acinetobactor sp. B2 showed high resistance up to 10 mg/mL unit to heavy metals such as Ba, Li, Al, Cr, Pb and Mn. Optimal growth condition of Acinetobactor sp. B2 was confirmed $30^{\circ}C$. Lipase was purified from the supernatant by Acinetobactor sp. B2. Its molecular mass was determined to the 60 kDa and the optimal activity was shown at $40^{\circ}C$ and pH 10. The activation energies for the hydrolysis of p-nitrophenyl palmitate were determined to be 2.7 kcal/mol in the temperature range 4 to $37^{\circ}C$. The enzyme was unstable at temperatures higher than $60^{\circ}C$. The Michaelis constant $(K_{m})\;and\;V_{max}$ for p-nitrophenyl palmitate were $21.8{\mu}M\;and\;270.3{\mu}M\;min^{-1}mg\;of\;protein^{-1}$, respectively. The enzyme was strongly inhibited by $Cd{2+},\;Co^{2+},\;Fe^{2+},\;Hg^{2+},\;EDTA$, 2-Mercaptoethalol. From these results, we suggested that lipase purified from Acinetobactor sp. B2 should be able to be used as a new enzyme for degradation of crude oil, one of the environmental contaminants.

• 한국세라믹학회지
• /
• 제27권7호
• /
• pp.899-906
• /
• 1990

The cordierite powders were prepared from Mg(NO3)2.6H2O, Al(NO3)3.9H2O and colloidal silica by the coprecippitation method, and the sintering behavior of the powders were investigated. Two different methods were applied for producing the precursor powders. The one was to added the aqueous solution of Mg(NO3)2.6H2O and Al(NO3)3.9H2O to NH4OH to adjust pH at 10 where the colloidal silica of pH 10 was added. The other wa to add the aqueous solution of Mg(NO3)2.6H2O and Al(NO3)3.9H2O to the colloidal silica with NH4OH to control the final mixture to be at pH 10. It was confirmed that more homogeneous powders were obtained from the latter method. The firing linear shrinkage of the powder compacts fabricated from the calcined powder between 90$0^{\circ}C$ and 110$0^{\circ}C$ was found to be larger as the calcination temperature was low. But all of them stopped shrinking around 120$0^{\circ}C$. The powder compacts, fabricated using the calcined powders at 90$0^{\circ}C$ and 95$0^{\circ}C$ for 2hours and sintered at 142$0^{\circ}C$ for 2hours, showed relative density of 93-96%, 3-point bending strength of 81-83MPa, KIC of 1.9-2.4 MPam1/2 and thermal expansion coefficient of 0.213-0.732$\times$10-6$^{\circ}C$.

• Journal of Electrochemical Science and Technology
• /
• 제14권4호
• /
• pp.326-332
• /
• 2023

The high cost of Si-based solar cells remains a substantial challenge to their widespread adoption. To address this issue, it is essential to reduce the production cost of solar-grade Si, which is used as raw material. One approach to achieve this is Si electrodeposition in molten salts containing Si sources, such as SiO₂. In this study, we present the pulse electrodeposition of Si in molten CaCl₂ containing SiO₂ nanoparticles. Theoretically, SiO₂ nanoparticles with a diameter of less than 20 nm in molten CaCl₂ at 850℃ have a comparable diffusion coefficient with that of ions in aqueous solutions at room temperature. However, we observed a slower-than-expected diffusion of the SiO₂ nanoparticles, probably because of their tendency to aggregate in the molten CaCl₂. This led to the formation of a non-uniform Si film with low current efficiency during direct current electrodeposition. We overcome this issue using pulse electrodeposition, which enabled the facile supplementation of SiO₂ nanoparticles to the substrate. This approach produced a uniform and thick electrodeposited Si film. Our results demonstrate an efficient method for Si electrodeposition in molten CaCl₂ containing SiO₂ nanoparticles, which can contribute to a reduction in production cost of solar-grade Si.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1314-1318
• /
• 2010

The $[Ru(tpy)_2]Cl_2$ (tpy:2,2':6',2"-terpyridine) complex was synthesized and its structure was confirmed by $^1H$-NMR and elemental analysis. Its binding mode toward DNA was compared with the well-known $[Ru(bpy)_3]Cl_2$ (bpy:2,2-bipyridyl), using isotropic absorption, linear dichroism(LD) spectroscopy, and an energy minimization study. Compared to $[Ru(bpy)_3]^{2+}$, the $[Ru(tpy)_2]^{2+}$ complex exhibited very little change in its absorption pattern, especially in the MLCT band, upon binding to DNA. Furthermore, upon DNA binding, both Ru(II) complexes induced a decrease in the LD magnitude in the DNA absorption region. The $[Ru(tpy)_2]^{2+}$ complex produced a strong positive LD signal in the ligand absorption region, which is in contrast with the $[Ru(bpy)_3]^{2+}$ complex. Observed spectral properties led to the conclusion that the interaction between the ligands and DNA bases is negligible for the $[Ru(tpy)_2]^{2+}$ complex, although it formed an adduct with DNA. This conclusion implies that both complexes bind to the surface of DNA, most likely to negatively charged phosphate groups via a simple electrostatic interaction, thereby orienting to exhibit the LD signal. The energy minimization calculation also supported this conclusion.

• 한국화재소방학회논문지
• /
• 제19권2호
• /
• pp.37-44
• /
• 2005

가스계소화설비인 $CO_2$소화장치의 구성 중 $CO_2$노즐수에 따른 유동특성 및 $CO_2$소화제 농도분포를 분석하기 위하여 $CO_2$ 노즐수를 변화시키면서 전산모사실험을 3차원 비정상상태로 수행하였다. 실제 선박의 기관실을 방호공간으로 선정하여 유동장과 $CO_2$소화제 농도장을 계산하였다. $CO_2$소화제 노즐수를 2개에서 4개로 증가시킬 경우는 낮은 농도분포를 나타냈고, $CO_2$소화제 노즐수를 6개 이상으로 증가시킬 경우는 전 영역에 영향을 미치는 재순환 유동이 형성되었다. $CO_2$소화제 노즐수를 4개 이상 증가시킬 경우는 0.36이하의 등농도선대가 확장 또는 수축되었다. 따라서 $CO_2$ 소화장치 설계 시 적정한 소화제노즐수와 노즐배열을 고려해야 할 것으로 생각된다.

• 한국환경보건학회지
• /
• 제21권3호
• /
• pp.107-114
• /
• 1995

To assess the contribution of automobile exhaust to indoor and outdoor levels of $NO_2$ around a major trunk road in Tokyo, $NO_2$ levels of 200 homes were measured at living rooms, kitchens and outdoor at each season, from the summer of 1990 to the spring of 1991, $NO_2$ level was measured for four days using diffusion $NO_2$ dosimeter. Outdoor $NO_2$ levels at each season and indoor $NO_2$ levels at seasons when heaters were not used decreased according to the distance from the roadside. The differences between $NO_2$ levels at zone I(within 20m from the roadside) and zone III(beyond 50m) was about 3 ppb. Automobile exhaust seemed to contribute to this difference. At seasons when heaters were used, indoor $NO_2$ levels of the homes equipped with vented heater, decreased according to the distance from the roadside. However, there was no correlation between indoor levels and the distance from the roadside at homes equipped with unvented heater.

• 한국대기환경학회지
• /
• 제14권4호
• /
• pp.333-342
• /
• 1998

Plasma process has great possibilities to remove SOx, NOx simultaneously with high treatment efficiency and is expected to be suitable for small or middle plants. It was accomplished to evaluate SO2, NOx control possibility and achieve basic data to control pollutants by use of Surface Discharge Induced Plasma Chemical Process (SPCP) in this study. O3 generation characteristics by discharge of a plate was proportional to O2 concentration and power consumption and inversely proportional to temperature and humidity, In case of dry air, NOx was highly generated by N2 and O2 in air during the plasma discharge process but it was decreased considerably as H2O was added. SO2 removal efficiency was very high, and removal rate was 170,350 mEA at 30,50 watt respectively in flue gas which is usually contain HIO. NOx removal efficiency was about 57% at 40 watt power consumption with 7.5% humidity. It is estimated that H2O has an important role in reaction mechanism with pollutants according to plasma discharge.

• 기본간호학회지
• /
• 제1권2호
• /
• pp.173-191
• /
• 1994

This descriptive-correlational study was conducted to exam if there were relation between noise level and reaction to noise of inpatient. The purpose of this study was to provide a basic data for comfort of patient hospitalized. The hypotheses of the study are : 1. The higher perceived noise level of inpatient, the higher reaction level to noise. 2. The higher perceived noise level of inpatient, physiological reaction level to noise. 3. The higher perceived noise level of inpatient, the higher emotional reaction level to noise. The participant were 153 patients hospitalized in one general hospital. The research instruments used for this study were noise scale and reaction of patient scale developed by the author. Data was collected over a period of 10 days from the 9th of July to the 18th of July, 1994. Statistical analysis of the data included percentage, t-test, ANOVA and Scheffe test. Examination of the hypotheses was done by use of pearson correlation coefficient. The results are summarized as follows ; 1. The mean score of noise level was 2.24. Among noise factors reported by the subjects, that which ranked highest was 'Conversation of Visitors'(2.82). Next were 'noise of handling receptacle'(2.73), 'the others noise from outside'(2.73) and 'Conversation of supporter'(2.71). 2. The mean score of reaction level to noise was 2.19, physiological reaction level 2.04 and emotional reaction level 2.37. Among Physiological reaction to noise reported by the subjects, that which ranked highest was 'tired'(2.39). Next were 'sweating'(2.22) and 'headache'(2.20). Among emotional reaction to noise reported by the subjects, that which ranked highest was 'to irritate nerve'(2.53). Next were 'disturbing rest'(2.51) and 'to disturb sleep'(2.46). 3. The relationship between perceived noise level of inpatient and reaction to noise was statically significant (r=0.599, p=.0001). The relationship between perceived noise level of inpatient and physiological reaction to noise was statically significant (r=0.554, p=.0001). The relationship between perceived noise level of inpatient and emotional reaction to noise was statically significant(r=0.535, p=.0001). Thus hypothese 1, 2, 3 were supported. 4. There were significant differences between noise level of inpatient, admission periods, mobility of physical condition and exposure level to noise. 5. There were significant differences between physiological reaction level to noise, admission periods, mobility of physical condition and operation Yes or No. 6. There were significant difference between emotional reaction level to noise, admission periods, mobility of physical condition and exposure level to noise.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1265-1272
• /
• 2007

A solid acid catalyst, NiSO4/CeO2-ZrO2 was prepared simply by promoting ZrO2 with CeO2 and supporting nickel sulfate on CeO2-ZrO2. The support of NiSO4 on ZrO2 shifted the phase transition of ZrO2 from amorphous to tetragonal to higher temperatures because of the interaction between NiSO4 and ZrO2. The surface area of 10-NiSO4/1-CeO2-ZrO2 promoted with CeO2 and calcined at 600 oC was very high (83 m2/g) compared to that of unpromoted 10-NiSO4/ZrO2 (45 m2/g). This high surface area of 10-NiSO4/1-CeO2-ZrO2 was due to the promoting effect of CeO2 which makes zirconia a stable tetragonal phase as confirmed by XRD. The role of CeO2 was to form a thermally stable solid solution with zirconia and consequently to give high surface area and acidity of the sample, and high thermal stability of the surface sulfate species. 10-NiSO4/1- CeO2-ZrO2 containing 1 mol% CeO2 and 10 wt% NiSO4, and calcined at 600 oC exhibited maximum catalytic activities for both reactions, 2-propanol dehydration and cumene dealkylation.

• 공업화학
• /
• 제2권4호
• /
• pp.330-339
• /
• 1991

$V_2O_5-TiO_2/SiO_2$ 촉매를 제조하여 그 산특성을 조사하였고, 동 촉매상에서 o-자일렌의 무수프탈산으로의 부분산화반응에 대한 활성측정을 병행하여 촉매의 산특성과 반응성과의 연관성을 알아보았다. $V_2O_5$ 촉매는 V=O로 추정되는 약산점과 V-O-V로 추정되는 강산점을 가지고 있었으며, 소성온도가 높아질수록 약산점의 양이 감소하였다. $V_2O_5-TiO_2/SiO_2$ 촉매의 경우 약산점이 크게 나타났으며, 그 양은 $SiO_2$의 담지량이 20 mole% 일 때 최대치를 보였고 그 이상에서 일정하였다. 한편, o-자일렌 부분산화반응에서 $V_2O_5-TiO_2/SiO_2$는 $V_2O_5/SiO_2$에 비해 전체 전환율 및 무수프탈산으로의 선택도를 크게 증가시켰으며, $V_2O_5-TiO_2/SiO_2$에서 $TiO_2$의 양이 증가할 경우 전체 전환율은 증가하였으나 무수프탈산으로의 선택도는 크게 변하지 않았다. V=O로 추정되는 약산점은 o-자일렌을 약하게 흡착함으로써 무수프탈산으로의 부분산화반응을, V-O-V로 추정되는 강산점은 o-자일렌을 보다 강하게 흡착하여 $C_1$으로의 완전산화반응을 각각 유도함을 알 수 있었다.