• 한국환경보건학회지
• /
• 제40권4호
• /
• pp.294-303
• /
• 2014

Objectives: Excretion and tissue distribution of titanium oxide nanoparticles were evaluated in rats after oral administration. The relation between toxicity and systemic concentration of nanoparaticles was investigated. Methods: Rats were orally treated with titanium oxide nanoparticles (10, 100 mg/kg) for five consecutive days. General toxicity, blood chemistry, and serum biochemical analysis were analyzed. Titanium concentration in liver, kidney, lung, urine and feces were measured and histopathology was performed in these organs. Results: Induction of toxicological parameters was not observed and titanium nanoparticles were excreted via feces. Conclusion: Absorption of titanium oxide nanoparticles via the gastrointestinal tract after oral administration was very poor and systemic concentration of titanium oxide nanoparticles was not elevated. Titanium oxide nanoparticles did not cause toxicities in rats after oral administration.

• Environmental Analysis Health and Toxicology
• /
• 제23권4호
• /
• pp.285-290
• /
• 2008

Effects of titanium dioxide nanoparticles on blood coagulation and platelet aggregation were investigated using diluted whole blood and platelet rich plasma (PRP) solution prepared from human and rat blood, respectively. Blood coagulation was monitored by using a whole blood impedance aggregometer and titanium dioxide nanoparticle (10, 20, and 40 ppm) did not show any effect on the coagulation both in human and in rat blood. When platelet aggregation was measured by turbidometric method after addition of titanium dioxide nanoparticles to PRP solution with final concentrations of 1, 5 and 10 ppm. no aggregation was observed.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2343-2347
• /
• 2015

This paper reports the effect of Titanium dioxide (TiO₂) nanoparticles on a TiO₂ sol-gel Schottky diode. TiO₂ nanoparticles were blended with TiO₂ sol-gel to fabricate the Schottky diode. TiO₂ nanoparticles showed strong anatase and rutile X-ray diffraction peaks. However, the mixture of TiO₂ sol-gel and TiO₂ nanoparticles exhibited no anatase and rutile peaks. The forward current of the Schottky diode drastically increased as the concentration of TiO₂ nanoparticles increased up to 10 wt. % and decreased after that. The possible conduction mechanism is more likely space charge limited conduction.

• Advances in nano research
• /
• 제5권1호
• /
• pp.27-34
• /
• 2017

One of the methods of removing cyanide from wastewater is surface adsorption. We simulated the removal of cyanide from a synthetic wastewater in the presence of Titanium dioxide nano-particles absorbent uses VISUAL MINTEQ 3.1 software. Our aim was to determine the factors affecting the adsorption of cyanide from synthetic wastewater applying simulation. Synthetic wastewater with a concentration of 100 mg/l of potassium cyanide was used for simulation. The amount of titanium dioxide was 1 g/l under the temperature of $25^{\circ}C$. The simulation was performed using an adsorption model of Freundlich and constant capacitance model. The results of simulation indicated that three factors including pH, nanoparticles of titanium dioxide and the primary concentration of cyanide affect the adsorption level of cyanide. The simulation and experimental results had a good agreement. Also by increasing the pH level of adsorption increases 11 units and then almost did not change. An increase in cyanide concentration, the adsorption level was decreased. In simulation process, rising the concentrations of titanium dioxide nanoparticles to 1 g/l, the rate of adsorption was increased and afterward no any change was observed. In all cases, the coefficient of determination between the experimental data and simulation data was above 0.9.

• Membrane and Water Treatment
• /
• 제9권6호
• /
• pp.481-487
• /
• 2018

Membrane clogging or fouling of the membrane caused by organic, inorganic, and biological on the surface is one of the main obstacles to achieve high flux over a long period of the membrane filtration process. So researchers have been many attempts to reduce membrane fouling and found that there is a close relationship between membrane surface hydrophilicity and membrane fouling, such that the same conditions, a greater hydrophilicity were less prone to fouling. Nanotechnology in the past decade is provided numerous opportunities to examine the effects of metal nanoparticles on the both hydrophilic and antibacterial properties of the membrane. In the present study the improvement of hydrophilic and antimicrobial properties of the membrane was evaluated by adding nanoparticles of titanium dioxide and copper oxide. For this purpose, 4% copper oxide and titanium dioxide nanoparticles with a ratio of 0, 30, 50, and 70% of copper oxide added to the polymeric membrane and compare to the pure polymeric membrane. Comparison experiments were performed on E. coli PTCC1998 in two ways disc and tube and also to evaluate membrane hydrophilic by measuring the contact angle and diameter of pores and analysis point SEM has been made. The results show that the membrane-containing nanoparticle has antibacterial properties and its impact by increasing the percentage of copper oxide nanoparticles increases.

• 한국안광학회지
• /
• 제19권3호
• /
• pp.315-322
• /
• 2014

목적: 4-iodoaniline을 포함한 하이드로젤 콘택트렌즈 기본 재료에 티타늄 실리콘 산화물 나노입자를 첨가하여 친수성 착색 콘택트렌즈의 물리적 및 광학적 특성을 측정하고 제조된 고분자의 자외선 투과율을 측정하여 티타늄 실리콘 옥사이드 나노입자의 자외선 차단 안의료용 렌즈 소재로의 활용도 및 4-iodoaniline만을 기본 콘택트렌즈 재료에 공중합하여 두 실험군의 물성을 비교 분석하였다. 방법: 하이드로젤 렌즈 제조를 위해, HEMA, MA, MMA, 4-iodoaniline, 교차결합제인 EGDMA 및 개시제인 AIBN을 사용하여 공중합 하였다. 또한, 티타늄 실리콘 옥사이드 나노입자는 첨가제로 사용되었다. 중합 후 제조된 콘택트렌즈 재료의 함수율, 굴절률, 접촉각 및 분광투과율 등의 물리적 특성을 측정하였다. 결과: 하이드로젤 렌즈 고분자의 물성을 측정한 결과, 함수율 35.01~ 38.68%, 굴절률 1.4350~1.4418, 접촉각 $34.15{\sim}57.25^{\circ}$ 그리고 UV-B 투과율의 경우 1.0~10.0%의 범위로 나타났다. 또한 첨가제를 사용하지 않은 실험군에서는 함수율 34.0~36.8%, 굴절률 1.4378~1.4420, 접촉각 $40.15{\sim}60.16^{\circ}$ 그리고 UV-B 투과율의 경우 1.8~25.0% 범위의 분포를 나타내었다. 결론: 티타늄 실리콘 옥사이드 나노입자를 첨가한 조합에서 자외선 투과율이 크게 감소하는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2477-2480
• /
• 2014

Thermal degradation of titanium-containing metal-organic frameworks (MOFs; MIL-125 and MIL-125-$NH_2$ at $350^{\circ}C$ for 6 h in air produced $TiO_2$ nanoparticles of ca. 10 nm in diameter. Scanning electron and transmission electron microscope analyses indicated that those nanoparticles were aggregated randomly within each crystalline particle of their MOF precursors. The $TiO_2$ nanoparticles prepared from MIL-125-$NH_2$ exhibited higher activity for the degradation of 4-chlorophenol under visible light.

• Toxicological Research
• /
• 제25권4호
• /
• pp.195-201
• /
• 2009

Recent publications showed that metal nanoparticles which are made from $TiO_2,\;CeO_2,\;Al_2O_3,\;CuCl_2,\;AgNO_3$ and $ZnO_2$ induced oxidative stress and pro-inflammatory effects in cultured cells and the responses seemed to be common toxic pathway of metal nanoparticles to the ultimate toxicity in animals as well as cellular level. In this study, we compared the gene expression induced by two different types of metal oxide nanoparticles, titanium dioxide nanoparticles (TNP) and cerium dioxide nanoparticles (CNP) using microarray analysis. About 50 genes including interleukin 6, interleukin 1, platelet-derived growth factor $\beta$, and leukemia inhibitory factor were induced in cultured BEAS2B cells treated with TNP 40 ppm. When we compared the induction levels of genes in TNP-treated cells to those in CNP-treated cells, the induction levels were very correlated in various gene categories (r=0.645). This may suggest a possible common toxic mechanism of metal oxide nanoparticles.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.64.2-64.2
• /
• 2010

In order to improve the overall power conversion efficiency in dye-sensitized solar cells (DSSCs), it is very important to secure the sufficient surface area of photocatalytic nanoparticles layer for absorbing dye molecules. It is because increasing the amount of dye absorbed generally results in increasing the amount of light harvesting. In this work, we proposed a new method for increasing the specific surface area of photocatalytic titanium oxide ($TiO_2$) nanoparticles by using an inorganic templating method. Salt-$TiO_2$ composite nanoparticles were synthesized in this approach by spray pyrolyzing both the titanium butoxide and sodium chloride solution. After aqueous removal of salt from salt-$TiO_2$ composite nanoparticles, mesoporous $TiO_2$ nanoparticles with pore size of 2~50 nm were formed and then the specific surface area of resulting porous $TiO_2$ nanoparticle was measured by Brunauer-Emmett-Teller (BET) method. Generally, commercially available P-25 with the average primary size of ~25 nm $TiO_2$ nanoparticles was used as an active layer for dye-sensitized solarcells, and the specific surface area of P-25 was found to be ~50 $m^2/g$. On the other hand, the specific surface area of mesoporous $TiO_2$ nanoparticles prepared in this approach was found to be ~286 $m^2/g$, which is 5 times higher than that of P-25. The increased specific surface area of $TiO_2$ nanoparticles will absorb relatively more dye molecules, which can increase the short curcuit current (Jsc) in DSSCs. The influence of nanoporous structures of $TiO_2$ on the performance of DSSCs will be discussed in terms of the amount of dye molecules absorbed, the fill factor, the short circuit current, and the power conversion efficiency.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.87-90
• /
• 2005

This paper presents an evaluation of the effect of titanium dioxide nanoparticles in sulfonated poly(ether ether ketone) (SPEEK) with sulfonation degree of 57%. A series of inorganic-organic hybrid membranes were prepared with a systematic variation of titanium dioxide nanoparticles content. Their water uptake, methanol permeability and proton conductivity as a function of temperature were investigated. The results obtained show that the inorganic oxide network decreases the proton conductivity and water swelling. It is also found that increase in inorganic oxide content leads to decrease of methanol permeability. In terms of morphology, membranes are homogeneous and exhibit a good adhesion between inorganic domains and the polymer matrix. The properties of the composite membranes are compared with standard nafion membrane.