• 전자공학회논문지SC
• /
• 제41권6호
• /
• pp.51-60
• /
• 2004

본 논문은 광역학적 암치료 효율을 높이기 위한 레이저 시스템의 최적화 구현에 관한 연구이다. 레이저 시스템의 최적화를 위해서는 레이저 출력의 출력 변동율과 파장대의 편이가 적어야 한다. 임상에서 암치료의 효율을 높이기 위해서는 악성종양부위에 조사되는 방사방식이 다양하게 구현되어야 한다. 기존에 사용되고 있는 C.W 방식은 정상조직에도 손상을 입힐 수 있는 생체조직의 열적효과를 가져올 수 있다. 이에 새로운 방사모드를 제안하여 생체조직에 대한 열적 안전성과 치료의 효율을 높였다. 실험을 통하여 광파장의 안정성 및 광 출력과 출력의 안정성을 확인 하였고, 피부조직의 열적 손상 방지를 위한 방사모드의 구현은 생체조직에 대한 실험을 통해서 본 연구의 타당성을 검증하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.296-301
• /
• 1999

Different papers such as toilet and towel tissue, newsprint and copy paper made from reclaimed fibres were characterized using UV-VIS reflectance and fluorescence spectroscopy. The emission properties of the extracts of the papers were also evaluated. Photochemical irradiation at ambient temperatures, and thermal aging of the copy papers at 105$^{\circ}C$ and 150$^{\circ}C$ were performed. Post-colour numbers (PC) were calculated from the reflectance values measured from the corresponding UV-VIS reflectance spectra. Light absorption coefficient spectra were calculated before and after irradiation, and the changes in absorption coefficient were related to the content of chromophores in the papers. Photochemical and thermal discolouration of the copy papers, similar to that of virgin fibres, was readily observed. The influence of changes in the concentrations of fluorescent brightening agents and dyes on the spectral properties was also assessed. Photostabilization studies of the copy papers were performed with the use of polymer additives polyethylene glycol (PEG) and polytetrahydrofuran (PTHF).

• 펄프종이기술
• /
• 제34권4호
• /
• pp.30-36
• /
• 2002

This research was conducted to investigate the feasibility of using deinked pulp of white ledger(DIP) for the manufacture of high quality premium tissue. The three types of tissues were prepared using the softener treated bleached DIP, softener treated mixed pulp of unbleached DIP and virgin pulp, and untreated mixed pulp of bleached DIP and virgin pulp, respectively, and their tensile index. softness, and brightness were measured and compared. The bulk and surface softness increased only slightly by the addition of softener(0.2% mineral oil) into the bleached DIP. The tensile index was decreased by 15∼30%, and the brightness was the range of 86% to 87% ISO. The softener(0.2∼0.8% mineral oil or dialkyl imidazoline) treatment of mixed pulp of unbleached DIP and virgin pulp Improved the bulk and surface of tissue considerably. However, the brightness was low as 85% ISO or below. Although the softness of the tissue made from bleached DIP blended with virgin pulp was the lowest among three types of tissues evaluated, its tensile index was the highest and brightness was 87∼88% ISO. Based on the results, it may be predicted that the bleached DIP blended with virgin pulp is the best raw material for the manufacture of high quality premium tissue if softener treatment is applied to mixed pulp, because the softness can be improved by the addition of softener. In general, the softness of tissue was improved with the increase in the amount of softener: However, the tensile index inversely proportional to the amount of softener added. Dialkyl imidazoline was more effective than mineral oil with respect to the improvement in softness, even though the loss in tensile index was severe with the treatment of dialkyl imidazoline.

• Archives of Reconstructive Microsurgery
• /
• 제21권1호
• /
• pp.76-80
• /
• 2012

Various soft tissue defects can be occurred in the hand. In determining the most suitable means of reconstruction a defect, the benefit of the reconstruction has to outweigh the risk of donor morbidity. Flap selection will be based on the size of the defect, the requirements for sensibility, the surgeon's comfort level, and the patient profile such as gender, age, or systemic disease. The hand is the most important tactile sensory organ, hence sensory restoration is critical. Neurosensory free flaps can provide sensibility, vascularity, and soft tissue coverage to an injured hand. This paper will discuss free flaps which can be used for soft tissue reconstruction of the hand.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.275-276
• /
• 1998

In this paper, we present the software on the development of the computerized imaging system for diagnosis and treatment plannig of orthodontics and orthognathic surgery. Soft tissue changes followed by orthognathic surgery mainly depends on surgical movements of hard tissue. Then, the stepwise multiple regression method was used to investigate the soft tissue changes followed by hard tissue changes. As a result of this research, we were able to develop a system which diagnoses automatic X-ray images and predicts soft tissue changes after othognathic surgery.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.109-115
• /
• 2001

This paper investigates the mechanical characteristics of angle-ply laminates with non-woven carbon tissue. The lami- nates were made by inserting non-woven carbon tissue at the interface. Specimens were rounded near the tabs by grinding and polishing to reduce the stress concentration. Cyclic loads were applied to the specimens and the stress and fatigue life curves were obtained. The matrix crack density was also evaluated to check the effects of non-woven carbon tissue on the fracture resistance of composite laminates. C-Sean technique was used to evaluate the delamination, and SEM was used to understand the fracture mechanisms of the laminates. Experimental results show that the fatigue strength and life of composite laminates were increased by inserting non- woven carbon tissues. The results also show that the matrix crack density and delamination area were reduced by inserting non-woven carbon tissues.

• BMB Reports
• /
• 제54권7호
• /
• pp.356-367
• /
• 2021

Cell-based therapy is a promising approach in the field of regenerative medicine. As cells are formed into spheroids, their survival, functions, and engraftment in the transplanted site are significantly improved compared to single cell transplantation. To improve the therapeutic effect of cell spheroids even further, various biomaterials (e.g., nano- or microparticles, fibers, and hydrogels) have been developed for spheroid engineering. These biomaterials not only can control the overall spheroid formation (e.g., size, shape, aggregation speed, and degree of compaction), but also can regulate cell-to-cell and cell-to-matrix interactions in spheroids. Therefore, cell spheroids in synergy with biomaterials have recently emerged for cell-based regenerative therapy. Biomaterials-assisted spheroid engineering has been extensively studied for regeneration of bone or/and cartilage defects, critical limb ischemia, and myocardial infarction. Furthermore, it has been expanded to pancreas islets and hair follicle transplantation. This paper comprehensively reviews biomaterials-assisted spheroid engineering for regenerative therapy.

• 충청수학회지
• /
• 제28권1호
• /
• pp.161-172
• /
• 2015

In this paper, we consider the chemotaxis-haptotaxis model of tumor invasion with the proliferation and tissue re-establishment term in dimensions one and two. We show the global in time existence of a unique classical solution for the the model in two dimensional spatial domain without any restrictions on the coefficients.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1247-1251
• /
• 1987

Cepstral analysis was performed on the ultrasonic echo signal from the tissue to achieve improvement on the estmation of the attenuation coefficient. In this paper, the feasibility of the acquiring the structural information of the tissue was also included by same method with band pass lifter.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.43-52
• /
• 1985

In this paper, the depth and attenuation coefficient are estimated from the mutilayered liver tissue which contained a inhomogeneous one using reflected ultrasonic signals and the abnormal one is detected quantitatively. Regarding a liver tissue as several reflectors, we analyzed each one by the frequency spectral difference method and discussed its attenuation characteristics. For the verification of this method, the liver pantom and acryle are used. And also we proved the usefulness through the experiment.