• Journal of Plant Biology
• /
• v.29 no.1
• /
• pp.11-18
• /
• 1986

Protopasts were isolated from cultured cells of potato (Solanum tuberosum L.) tuber tissue. The ability of callus formation from the culture cells was higher in cultivars Dejima and Superior than in Shimabara and Irish Cobbler on Lam's medium. Therefore, the former was used as sources for protoplast isolation. Friable calli were transferred to liquid media and cells in exponential phase were used for protoplast isolation. In both of Dejima and Superior, the yield of protoplasts was high in the enzyme solution of 2% Onozuka cellulase and 1% macerozyme. Also, viability of isolated protoplasts was very good. Thus, it seems that these protoplasts would be applicable to various aims of research.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.491-498
• /
• 1998

Transplanting process during the tissue culture of potato seedlings is costly, since the cost of highly skilled labor working in the sanitary environment takes up about 60-70% of the production cost. The objective of this study was to develop a soft gripper of a transplanting robot system for the labor-saving tissue culture. The prototype of the soft gripper was consisted of power-transmitting part finger and plant contacts. The power transmitting part transformed the rotating motion of a step motor to the reciprocating motion of the finger. Plant stems used in the test were potato seedlings cultured for six weeks. The dimensional characteristics of cultured seedlings, the compressive strengths of the stems, the extractive force from the culture medium and the gripping force of the finger were measured. A proper gripping force was found to be 0.343N at the extractive force of 0.41N when the plant contacts were made of silicon. Sixteen plants out of 70 trials were tangled with others, resulting in the success rate of 77.1%.

• Archives of Craniofacial Surgery
• /
• v.19 no.3
• /
• pp.181-189
• /
• 2018

Background: Autogenous bone grafts have several limitations including donor-site problems and insufficient bone volume. To address these limitations, research on bone regeneration is being conducted actively. In this study, we investigate the effects of a three-dimensionally (3D) printed polycaprolactone (PCL)/tricalcium phosphate (TCP) scaffold on the osteogenic differentiation potential of adipose tissue-derived stem cells (ADSCs) and bone marrow-derived stem cells (BMSCs). Methods: We investigated the extent of osteogenic differentiation on the first and tenth day and fourth week after cell culture. Cytotoxicity of the 3D printed $PCL/{\beta}-TCP$ scaffold was evaluated by 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium assay, prior to osteogenic differentiation analysis. ADSCs and BMSCs were divided into three groups: C, only cultured cells; M, cells cultured in the 3D printed $PCL/{\beta}-TCP$ scaffold; D, cells cultured in the 3D printed $PCL/{\beta}-TCP$ scaffold with a bone differentiation medium. Alkaline phosphatase (ALP) activity assay, von Kossa staining, reverse transcription-polymerase chain reaction (RT-PCR), and Western blotting were performed for comparative analysis. Results: ALP assay and von Kossa staining revealed that group M had higher levels of osteogenic differentiation compared to group C. RT-PCR showed that gene expression was higher in group M than in group C, indicating that, compared to group C, osteogenic differentiation was more extensive in group M. Expression levels of proteins involved in ossification were higher in group M, as per the Western blotting results. Conclusion: Osteogenic differentiation was increased in mesenchymal stromal cells (MSCs) cultured in the 3D printed PCL/TCP scaffold compared to the control group. Osteogenic differentiation activity of MSCs cultured in the 3D printed PCL/TCP scaffold was lower than that of cells cultured on the scaffold in bone differentiation medium. Collectively, these results indicate that the 3D printed PCL/TCP scaffold promoted osteogenic differentiation of MSCs and may be widely used for bone tissue engineering.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.1
• /
• pp.7-12
• /
• 2016

Total mercury (TM) is a hazardous element that is of particular concern to human health. Due to the diversity of dietary habits among fishes, tissue-specific analysis of hazardous elements is necessary. In this study, the tissue-specific TM in cultured fish was analyzed to conduct risk assessment. The highest concentrations of TM were found in the farmed marine fish Pagrus major (0.111 mg/kg) and in the farmed freshwater fish Channa argus (0.162 mg/kg). TM concentration was significantly correlated with total fish length (P<0.01). Significant differences in TM were found between three types of fish tissue, with the concentration in fish muscle being significantly higher than those of gill or liver (P<0.01). Moreover, the tissue-specific TM concentrations of farmed freshwater fish were significantly higher than those of farmed marine fish (P<0.01). According to the risk assessment, the TM body exposure rate of muscle and liver in cultured fishes ranged from 0.001 to 0.389% of the Provisional Tolerable Weekly Intake. Therefore, these results showing the tissue-specific TM contents of cultured fish could be useful to assess the health risks of Korean dietary habits.

• Tissue Engineering and Regenerative Medicine
• /
• v.15 no.6
• /
• pp.761-769
• /
• 2018

BACKGROUND: Bioprinting has recently appeared as a powerful tool for building complex tissue and organ structures. However, the application of bioprinting to regenerative medicine has limitations, due to the restricted choices of bio-ink for cytocompatible cell encapsulation and the integrity of the fabricated structures. METHODS: In this study, we developed hybrid bio-inks based on acrylated hyaluronic acid (HA) for immobilizing bio-active peptides and tyramine-conjugated hyaluronic acids for fast gelation. RESULTS: Conventional acrylated HA-based hydrogels have a gelation time of more than 30 min, whereas hybrid bio-ink has been rapidly gelated within 200 s. Fibroblast cells cultured in this hybrid bio-ink up to 7 days showed >90% viability. As a guidance cue for stem cell differentiation, we immobilized four different bio-active peptides: BMP-7-derived peptides (BMP-7D) and osteopontin for osteogenesis, and substance-P (SP) and Ac-SDKP (SDKP) for angiogenesis. Mesenchymal stem cells cultured in these hybrid bio-inks showed the highest angiogenic and osteogenic activity cultured in bio-ink immobilized with a SP or BMP-7D peptide. This bio-ink was loaded in a three-dimensional (3D) bioprinting device showing reproducible printing features. CONCLUSION: We have developed bio-inks that combine biochemical and mechanical cues. Biochemical cues were able to regulate differentiation of cells, and mechanical cues enabled printing structuring. This multi-functional bio-ink can be used for complex tissue engineering and regenerative medicine.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.175-182
• /
• 2009

This study was conducted to investigate the drying characteristics of tissue cultured mountain ginseng roots. The far infrared rays dryer of a double blast system used for this experiment can control the drying parameters such as far infrared heater temperature and air velocity. The far infrared rays drying tests of tissue cultured mountain ginseng roots were performed at air velocity of 0.4, 0.6, 0.8 m/s, under drying air temperature of 50, 60, and $70^{circ}C$, respectively. The results were compared with one obtained by the heated air drying method. The drying characteristics such as drying rate, color, energy consumption, saponin components and antioxidant activities were analyzed. The results showed that the drying rate of far infrared rays drying was faster than that of heated air drying and due to high temperature of drying air and fast air velocity, the far infrared rays drying of double blast type was superior to the heated air drying. The value of the color difference for heated air drying was 10.11${\sim}$12.99 and that of far infrared rays drying was in the range of 7.05${\sim}$7.54, which was in the same drying condition, also energy consumption of far infrared rays drying was in the range of 3575${\sim}$6898 kJ/kg-water. At the same time, the antioxidant activities using far infrared rays drying were higher than those using heated air drying.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.10
• /
• pp.1577-1582
• /
• 2006

Cartilage tissue engineering has emerged as an alternative approach for reconstruction or repair of injured cartilage tissues. In this study, rabbit chondrocytes were cultured in a three-dimensional environment to fabricate a new cartilaginous tissue with the application of tissue engineering strategies based on biodegradable PLGA microspheres. Chondrocytes were seeded on PLGA microspheres and cultured on a rocking platform for 5 weeks. The PLGA microspheres provided more surface area to adhere chondrocytes compared with PLGA sponge scaffolds. The novel system facilitated uniform distribution of the cells on the whole of the PLGA microspheres, thus forming a new cartilaginous construct at 4 weeks of culture. The histological and immunohistochemical analyses verified that the number of chondrocytes and the amount of extracellular matrix components such as proteoglycans and type II collagen were significantly greater on the PLGA microspheres constructs as compared with those on the PLGA sponge scaffolds. Therefore, PLGA microspheres enhanced the function of chondrocytes compared with PLGA sponge scaffolds, and thus might be useful for formation of cartilage tissue in vitro.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.284-301
• /
• 2022

The limitations of food production caused by global warming, consumption of soil fertility, and land shortage have demanded the development of alternative foods. Their market has been increasing, and in particular, there is an urgent need for an alternative meat. Among them, the non-slaughtered cell-cultured meat that can be manufactured in the laboratory, that is, cultured meat, is in the spotlight, which can solve the problem of meat consumption while including the advantages of meat. It is classified into minced cultured meat and structured one with a structure similar to that of real meat. The latter is currently facing limitations related scaffolds, cells, and the multiplicative problems, and many attempts are being made to solve them. The complex problem is related to secure texture and taste as well as structural similarity to actual meat. To solve the problems, it is necessary to lay emphasis on cells, there are fat cells and vascular cells, and the most fundamental cells, muscle cells. These are the main cells that control the texture and nutrients of meat, and unlike other cells, they grow in the form of fibers. A myofibril (also known as a muscle fibril) is a basic rod-like organelle of a muscle cell, which is a quantitatively major component of meat, and one of the tissues that maintain the appearance of the body and bones. In this review article, we focused on the growth of muscle cells into long, tubular cells known as muscle fibers using the fabricated fibrous scaffold, and reviewed not only research results for muscle tissue engineering but also various results in the related fields for the last five years.

• Journal of Plant Biology
• /
• v.29 no.4
• /
• pp.233-242
• /
• 1986

In order to pursue some physiological studies on organogenesis in ginseng tissue culture, ginseng root explants were cultured on a modified MS medium containing NAA and kinetin. The activities of peroxidase and some enzymes were investigated and their isoenzyme patterns were also observed. The activity of peroxidase decreased by 20% in one week's culture and increased thereafter by 80% in culturing for 7 weeks compared with the control group. Glucose-6-phosphate dehydrogenase activity increased by 400% after culturing for 5 weeks and increased during the days preceeding root formation. The activities of glutamate dehydrogenase and acid phosphatase also increased during the culture. After 3 weeks' culture, new peroxidase isozyme (pH 7.6) appeared and 7 weeks' culture, another new peroxidase isozyme (pH unidentified) appeared. These patterns were also identified by using FPLC. After 7 weeks' culture, a new esterase isozyme of pH 8.5 appeared and isozyme patterns of acid phosphatase were quite changed compared with the isozyme patterns of tissue cultured for 5 weeks. In so far as these new isoenzymes appear distinctively after 7 weeks' culture, root differentiation is supposed to be induced after 7 weeks' culture.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.3
• /
• pp.231-239
• /
• 1999

In oral and maxillofacial surgery, there are many cases requiring the graft of epidermal tissues such as maxillectomy, and vestibuloplasty. There have been so many challenges for the culture of the epidermal tissue. Observing the ultrastructure of the cultured human oral kertinocytes, we could compare this findings with that of in vivo ones. With that, we could find the differencies and similarities between cultured cells and in vivo ones, and evaluate the clinical applications of cultured tissue. Human gingiva was obtained and the specimen was explanted on 24-well plate. Two types of culture media were used in this culture system. One was for the growth of the keratinocytes (Media I), and the other was for the stratification (Media II). Media I had special ingredients for the epidermal growth. Those were 0.5% dimethyl sulfoxide (DMSO), 30ng/ml of epidermal growth factor (EGF), 30ng/ml of cholera toxin, and $5{\mu}g/ml$ of transferrin. We cultured the oral keratinocytes for 3 weeks, and at that time the cultured keratinocytes were processed to prepare the specimen for the TEM study. The results were as follows.; 1. In the phase contrast micrograph, epidermal outgrowth firstly appeared on the 3rd day after explantation, and the growing keratinocytes were activley mitotic, and had polygonal shape and increased N/C ratio. 2. In the phase contrast micrograph, the outer most cells exhibited areas where broad cytoplasmic processes extended out onto the culture subtratum(fan-like appaearance). 3. In the TEM micrographs, the cultured keratinocytes showed stratification. The cells were in elongated form, and there were no morphologic differencies among the layers usually found in the in vivo gingiva. 4. Most of cellular organelles underwent lysis, and keratohyaline granules were seen. Tonofibrils were dispersed in the cytoplasm. 5. The cells were interconnected by desmosomes, and their frequency of distribution was considered to be lower than that of in vivo keratinocytes. 6. We could conclude the cultured oral keratinocytes exhibited signs of terminal differentiation.