For a study on aluminium equivalent towards tissue equivalent material, authors made use of the Mix-DP as a tissue equivalent material. The aim of this study is to furnish the information on radiotherapy and x-ray diagnosis.
온열치료의 품질관리를 위해서 조직등가 팬텀이 필요하다. 그러나 이를 위한 팬텀이 없어 한천으로 만든 팬텀이 여러 연구에서 사용되고 있다. 본 연구에서는 한천 팬텀의 조직등가 특성을 조직등가 물질 볼루스와 비교하여 확인하였다. 한천 팬텀과 볼루스의 CT 영상을 획득하고 영상분석과 전산화 치료계획 시스템을 이용한 선량계산으로 조직등가 특성을 확인하였다. 평균 픽셀값은 볼루스에서 96.960 ± 10.999, 3% 한천 팬텀에서는 108.559 ± 8.233, 4% 한천 팬텀에서 111.844 ± 8.651의 값을 보였다. 6 MV 엑스선을 SSD 기법으로 1.5 cm 깊이에 100 cGy를 처방하여 10×10cm2로 조사하여 빔의 중심축에서 깊이에 따른 흡수선량을 계산하였다. 볼루스, 3% 한천 팬텀, 4% 한천 팬텀의 심부선량분포의 급내상관계수는 0.979(p<.001, 95%CI .957-.991)로 나타났다. 흡수선량을 계산한 지점의 밀도(g/cm3)는 볼루스에서 0.990 ± 0.020, 3% 한천 팬텀에서 1.018 ± 0.020, 4% 한천 팬텀에서 1.035 ± 0.024로 나타났다. 본 연구에서 CT영상의 분석과 전산화 방사선치료계획 시스템을 이용해 한천 팬텀의 내부 밀도 분포와 균일도가 조직등가 물질로서 적절함을 확인하였다.
In this paper we analyzed the mechanical behavior with respect to the thickness variation of elastic foundation(fatty tissue) in end-to-end anastomosis. This study considered the preliminary deformed shape induced by suturing in the anastomosis of coronary artery and PTFE with different diameters using simplified suturing model and the fatty tissue surrounding heart and coronary artery for more accurate result using finite element method. Area compliance(CA) was used to analyze the final deformed shape of the anastomotic part with respect to the thickness variation of fatty tissue under mean blood pressure, 100mmHg(13.3㎪). And Equivalent and circumferential stresses in the anastomosis were also analyzed with respect to the change of initial diameter ratio( $R_1$) and fatty tissue thickness( $T_{F}$). The results obtained were as follows : 1 When the elastic foundation, assumed to be incompressive material, surrounded the grafts in anastomosis, the compliance mismatch of artery and PTFE was reduced by 47 -72%. 2. As the initial diameter ratio( $R_1$) became larger, the higher difference of compliance was induced in spite of elastic foundation surrounding grafts. 3. The maximum nondimensional circumferential stress is twice or three times as high as the maximum nondimensional equivalent stress in the anastomotic part.t.
Park, Jong Hoon;Kim, Sung Hun;Ku, Youngmo;Lee, Hyun Su;Kim, Young-su;Kim, Chan Hyeong;Shin, Dong Ho;Lee, Se Byeong;Jeong, Jong Hwi
한국의학물리학회지:의학물리
/
제28권4호
/
pp.207-217
/
2017
For effective patient treatment in proton therapy, it is therefore important to accurately measure the beam range. For measuring beam range, various researchers determine the beam range by measuring the prompt gammas generated during nuclear reactions of protons with materials. However, the accuracy of the beam range determination can be lowered in heterogeneous phantoms, because of the differences with respect to the prompt gamma production depending on the properties of the material. In this research, to improve the beam range determination in a heterogeneous phantom, we derived a formula to correct the prompt-gamma distribution using the ratio of the prompt gamma production, stopping power, and density obtained for each material. Then, the prompt-gamma distributions were acquired by a multi-slit prompt-gamma camera on various kinds of heterogeneous phantoms using a Geant4 Monte Carlo simulation, and the deduced formula was applied to the prompt-gamma distributions. For the case involving the phantom having bone-equivalent material in the soft tissue-equivalent material, it was confirmed that compared to the actual range, the determined ranges were relatively accurate both before and after correction. In the case of a phantom having the lung-equivalent material in the soft tissue-equivalent material, although the maximum error before correction was 18.7 mm, the difference was very large. However, when the correction method was applied, the accuracy was significantly improved by a maximum error of 4.1 mm. Moreover, for a phantom that was constructed based on CT data, after applying the calibration method, the beam range could be generally determined within an error of 2.5 mm. Simulation results confirmed the potential to determine the beam range with high accuracy in heterogeneous phantoms by applying the proposed correction method. In future, these methods will be verified by performing experiments using a therapeutic proton beam.
The purpose of this study is to evaluate the biomechanical properties of fractured adjacent soft tissue during closed reduction after forearm fracture using the finite element method. To accomplish this, a finite element (FE) model of the forearm including soft tissue was constructed, and the material properties reported in previous studies were implemented. Based on this, nine finite element models with different fracture types and fracture positions, which are the main parameters, were subjected to finite element analysis under the same load and boundary conditions. The load condition simulated the traction of increasing the fracture site spacing from 0.4 mm to 1.6 mm at intervals of 0.4 mm at the distal end of the radioulnar bone. Through the finite element analysis, the fracture type, fracture location, and displacement were compared and analyzed for the fracture site spacing of the fractured portion and the maximum equivalent stress of the soft tissues adjacent to the fracture(interosseous membrane, muscle, fat, and skin). The results of this study are as follows. The effect of the major parameters on the fracture site spacing of the fractured part is negligible. Also, from the displacement of 1.2 mm, the maximum equivalent stress of the interosseous membrane and muscle adjacent to the fractured bone exceeds the ultimate tensile strength of the material. In addition, it was confirmed that the maximum equivalent stresses of soft tissues(fat, skin) were different in size but similar in trend. As a result, this study was able to numerically confirm the damage to the adjacent soft tissue due to the fracture site spacing during closed reduction of forearm fracture.
비침습적 치료 효과에 대한 기대로 집속 초음파를 이용한 하지정맥류 치료에 대한 많은 연구가 진행되고 있다. 본 연구에서는 초음파 정맥류 정맥 치료 효과 평가에 적용할 수 있는 생체 조직 팬텀과 조직 등가 팬텀을 제시 하였다. 제작된 팬텀은 음향학적 특징과 초음파 조사에 따른 수축률을 평가함으로써 유용성을 평가하였다. 하지정맥류가 발생하는 조직의 구조를 고려하여 피부, 지방, 근육의 세 층으로 된 다층 구조 팬텀을 제작하였으며, 각 층을 구성하는 물질은 인체와 유사한 특성을 갖도록 제작하였다. 또한 혈관 유사물질을 매식한 다층 구조 팬텀과 동물 혈관을 이용한 다층 구조 팬텀, 동물 조직을 이용한 다층 구조 팬텀을 제작하였으며, 초음파 조사에 따른 혈관 유사 물질 및 혈관 조직의 수축 정도를 B-mode 영상을 이용하여 평가하였다. 본 연구의 결과를 통하여 제시된 팬텀이 초음파 하지정맥류 치료 평가에 유효하게 활용될 수 있을 것으로 판단되었다. 또한, 집속 초음파를 이용한 하지정맥류 치료 장비 개발 및 치료 효과 검증에 중요한 역할을 할 것으로 판단된다.
방사선영상검사에서 발생하는 피폭선량에 대한 선량제한이 없으므로 방사선방호를 위한 정당화와 최적화가 반드시 필요하다. 조직등가물질 볼루스를 이용하여 방사선영상검사로 인한 피폭선량을 저감하면서 동시에 영상화질을 유지할 수 있는 범위를 확인하였다. 손 후전방향 프로젝션을 기준으로 50 kVp, 5 mAs, SID 100 cm, 8×10 inch 조건으로 볼루스를 0, 3, 5, 8, 10 mm 적용하여 손 부위 입사선량과 영상의 SNR을 확인하였다. 볼루스의 두께별 손 부위 입사선량(μGy)은 각각 125.41±0.288, 106.85±0.255, 104.97±0.221, 91.68±0.299, 90.94±0.106으로 나타나 볼루스의 사용여부와 그 두께에 따라 유의한 피폭선량 감소를 보였다. 영상의 SNR은 볼루스 각 두께에서 13.997, 13.906, 12.240, 12.538, 12.548로 나타나 큰 차이를 보이지 않았다. 방사선영상검사의 종류와 검사 부위에 따라 적절한 두께와 크기의 볼루스를 사용한다면 영상화질의 저하없이 유의한 피폭선량 저감효과를 볼 수 있음을 확인하였다.
중성자의 차폐를 고려할 경우 중성자의 차폐물질에 대한 감쇄와 마찬가지로 산란 효과가 중요함으로 이번 실험에서는 각종 방사선 차폐 물질인 납, 철, 콩크리트, 물, Paraffin, 및 borated paraffin등에 대해서 산란등가 선량을 Rem counter를 사용하여 측정하였다. 중성자선원은 Van de Graaff 가속기에서 얻은 0.5, 1, 2, 5, 및 18MeV의 중성자를 사용했으며 산란방향은 45$^{\circ}$, 90$^{\circ}$및 135$^{\circ}$의 3방향에 대해서 각 energy별로 측정하였다. 산란선은 산란체의 두께에 따라 증가하여 어느 이상의 두께에서는 포화상태가 되어 그 이상 증가하지 않았으며 납과 철이 제일 크고 수소함유량이 많은 물, paraffin등이 낮은 값임을 알았다.
두경부암 방사선치료 시 공동 경계면 및 주변 치료 부위의 선량 균일도 향상을 위하여 조직 등가의 thermoplastic 구강 보상체를 개발하였다. Thermoplastic의 유용성 평가를 위해, 기존에 사용해 오던 치과용 인상재료인 paraffin, alginate, 그리고 putty로 제작한 각 구강 보상체의 물성 및 선량 분포 향상도를 비교하였다. 물성 평가에는 강도 평가(압축 실험, 낙하 실험)와 자연변형도(시간에 따른 체적 변화) 평가를 수행하였으며, 개발한 선량 검증용 팬톰에 삽입한 유리선량계와 Gafchromic EBT2 필름을 이용하여 표면선량, 공동 경계면 선량 및 빔 측면도를 측정하여 전달 선량을 평가하였다. 두 달간 각 구강 보상체의 자연변형도 평가하였을 때, alginate는 수분증발로 최대 80% 체적 변화를 보였으나, thermoplastic을 포함한 나머지 조직 등가 물질은 체적 변화가 3% 미만으로 나타났다. 강도 평가 중 5회 반복한 1.5 m 높이의 자유 낙하실험에서 paraffin은 충격에 의하여 파손이 발생되었으나, thermoplastic은 낙하에 의한 파손이 발생되지 않았으며, 압축 강도 실험에서도 paraffin에 비하여 8배 이상의 높은 힘에서도 파손되지 않았다. 유리선량계를 이용한 선량 검증 결과, 1문 조사 시 조직등가[약 80 HU (Hounsfield Unit)]의 thermoplastic은 동일한 처방 선량 전달 시 약 1,000 HU 이상의 값을 나타내는 putty에 비해 4% 낮은 출력계수(monitor unit) 전달로 약 4.9%의 낮은 표면 선량을 전달하였다. 또한 빔 입사 방향을 기준으로 할 때, 구강 통과 후 경계면의 빔 측면도에서 선량 균일도 평가를 위해 측정한 조사영역 편평도는 air, thermoplastic, putty에서 각각 11.41, 3.98, 4.30으로 나타났다. Thermoplastic 구강 보상체는 조직 등가 물질로 기존에 사용해오던 구강 보상체에 비하여 강도가 높고 물질 변형 확률이 적으며, 구강을 포함을 경계면 및 주변 부위에 균일한 선량 분포를 형성할 수 있으므로 균일한 처방 선량 전달 및 피부 선량 감소가 가능하다.
본 연구의 목적은 이중에너지 CT를 이용한 유효원자번호 정보를 통한 췌장 검출 가능성 연구이다. 10개의 다양한 인체 등가 물질의 유효원자번호를 Stoichiometric calibration을 통해 추정하였다. Stoichiometric calibration을 위해 저에너지와 고에너지에 해당하는 10개 인체 등가 물질에 대한 HU값을 이용하였다. 이를 바탕으로 반복 알고리즘을 통해 인체 등가 물질에 대한 유효원자번호 영상을 추출하였다. 연구결과에 따르면, 유효원자번호에 따른 감약의 비는 R2값이 0.9999로 추정되었고, Pancreas, water, Liver, Blood, Spongiosa, Cortical bone의 유효원자번호는 이론값과 비교하여 전체적으로 1% 이내의 정확도를 보였다. 췌장암 검사는 조영제를 사용하므로 잠재적인 조영제 부작용 가능성이 있다. 이를 해결하기 위해 조영 증강 없는 이중에너지를 이용한 유효원자번호 추출을 통해 정확하고 안전한 검사에 기여할 수 있을 것으로 사료된다. 본 연구를 바탕으로 향후 연구에서는 임상 영상을 바탕으로 췌장암의 HU값을 이용하여 췌장암 검출에 대한 연구를 수행할 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.