• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.265-267
• /
• 2013

Tire labeling is an important issue to reduce $CO_2$ and to secure the safety of tire/vehicle on wet road. A basic study on the effects of tire basic stiffness design on tire labeling performance has been done through experimental test. The pass-by noise is affected by tire structural design. The tire with lower side part stiffness and lower tread part stiffness has the lowest PBN level and the best wet grip. And the tire with higher tread part stiffness and higher side part stiffness has the better RR performance. Also it is observed that the trade-off between RR and wet grip exists for various tire stiffness design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.268-270
• /
• 2013

It is well known that tire pattern design factors have a large influence on overall tire performance. In this paper, the basic study on the effects of tire pattern design factors on tire labeling performance has been carried out through experimental tests. The pass-by noise is affected by tire pattern design, by a maximum of 2.7dB(A), and the number of sipes gives large effects on PBN. The rolling resistance is also influenced, mostly by the number of longitudinal grooves and secondly the number of sipes. Finally, there is a weak correlation between PBN and RR when the pattern design factors are changed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.462-465
• /
• 2014

It is well known that tire/road factors have a large influence on overall tire performance. In this paper, the basic study on the effects of tire/road factors on the pass-by noise performance of tire labeling has been carried out through experimental tests. The tire pass-by noise is affected by road characteristic factors, especially greatly influenced by road friction coefficient, and the next dominant factor is road chipping size. For several authorized pass-by noise test tracks, the pass-by noise correlation test has been done to know the test site effect, which results in 2~3dB(A) variation of pass-by noise level. Finally, it is shown that the winter tire is differently influenced by the pass-by noise test track characteristics, as compared to all-season tire and summer tire.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.357-363
• /
• 2015

타이어 라벨링제 도입으로 인한 친환경 타이어 개발의 요구로 타이어산업에서 사용되고 있는 기존 산화아연의 문제점 개선을 위하여 나노산화아연과 나노기공 실리카와의 복합체 합성에 대한 연구를 진행하였다. 본 연구에서는 타이어의 트레드(tread) 부분에 적용될 기존의 고무 보강재인 카본블랙을 대체하기 위한 실리카와 나노산화아연의 복합체를 합성하기 위하여, 일정량의 나노기공 실리카를 함유하고 재질 상으로는 나노기공 실리카와 산화아연을 물리적 결합을 통하여 hysteresis 손상을 줄이면서 트레드의 탄성을 증대시키기 위해 내마모성능의 향상을 목표로 실험을 진행하였다. 이를 위하여 복합체와 고무 조성물과의 컴파운딩 시 낮은 활성도와 분산안정성 저하의 문제점 개선하고자 숙성시간(Aging time)과 몰 비 그리고 반응물의 반응 순서에 따라 미치는 영향에 대해 조사하였다. 0.03몰 비의 산화아연과 숙성기간 10일의 조건의 실리카에서 가장 작은 평균입도(약 50.5 nm)와 안정적인 분산성을 보였고, 약 $649m^2/g$의 높은 비표면적을 나타내었다.