• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.10-10
• /
• 2009

We have fabricated transparent and flexible thin film transistor(TFT) on polyethylene terephthalate(PET) substrate using Zinc Oxide (ZnO) and Indium Tin Oxide (ITO) film as active layer and electrode. The transfer printing method was used for printing the device layer on target plastic substrate at room temperature. This approach have an advantage to separate the high temperature annealing process to improve the electrical properties of ZnO TFT from the device process on plastic substrate. The resulting devices on plastic substrate presented mechanical and electrical properties similar with those on rigid substrate.

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.171-173
• /
• 2016

본 연구에서는 휴대용 온열기의 에너지 효율을 향상시키기 위하여 indium tin oxide (ITO) 나노입자 페이스트와 PDMS를 이용하여 PDMS/ITO 나노입자 박막 면상발열체를 제작하였고, ITO 나노입자 박막 면상발열체와 PDMS/ITO 나노입자 면상발열체의 온도 유지특성 및 소비전력량을 분석하였다. PDMS층의 낮은 열전도도로 PDMS/ITO 나노입자 박막 면상발열체의 온도유지시간이 ITO 나노입자 박막 면상발열체에 비해 1.5배 증가하였으며, 소비 전력량은 35% 절감되었다.

• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.1-17
• /
• 1991

The purpose of this study was to analyze the in vivo amalgam corrosion products qualitatively. 30 molars with large, intact amalgam restorations were selected. All the restorations were more than 5 years old. Twenty of the removed amalgams were embedded in acrylic resin block. The exposed surfaces of fifteen embedded amalgams were polished by amalgam polishing kit, and the rest were observed without polishing. The remaining 10 amalgams were fractured centrally and perpendiculary to the occlusal surface with a wire-cutter. After all specimens were cleaned ultrasonically in distilled water, each surface was examined under S.E.M. and E.D.A.X. (Energy Dispersive Micro X-ray Analyzer) to determine the morphology and chemical nature of the corrosion products. The following results were obtained: 1. The surfaces of the unpolished amalgam restorations were covered with thin amorphous layer of Sn-Ca-P-S complex with numerous cracks. 2. In the conventional amalgams, the major corrosion products were Sn-Cl phases however, tin oxide phases were also observed. 3. Only tin oxide phase was identified in the high copper amalgam, but it was less frequently observed than in the conventional amalgam. 4. It was easier to observe the corrosion product morphology in the fractured surfaces than in the polished ones. The morphologies of the corrosion product crystals looked like a stack of slightly bended plates in the Sn-Cl phases and polyhedra or polygonal prisms in the tin oxide phases.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.259-259
• /
• 2015

Single crystalline indium-tin-oxide (ITO) nanowires (NWs) were grown by sputtering method. A thin Ni film of 5 nm was deposited before ITO sputtering. Thermal treatment forms Ni nanoparticles, which act as templates to diffuse Ni into the sputtered ITO layer to grow single crystalline ITO NWs. This Ni diffusion through an ITO NW was investigated by transmission electron microscope to observe the Ni-tip sitting on a single crystalline ITO NW. Meanwhile, a single crystalline ITO structure was found at bottom and body part of a single ITO NW without remaining of Ni atoms. This indicates the Ni atoms diffuse through the oxygen vacancies of ITO structure. Rapid thermal process (RTP) applied to generate an initial stage of a formation of Ni nanoparticles with variation in time periods to demonstrate the existence of an optimum condition to initiate ITO NW growth. Modulation in ITO sputtering condition was applied to verify the ITO NW growth or the ITO film growth. The Ni-assisted grown ITO layer has an improved electrical conductivity while maintaining a similar transmittance value to that of a single ITO layer. Electrically conductive and optically transparent nanowire-coated surface morphology would provide a great opportunity for various photoelectric devices.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.91-94
• /
• 2022

Top emission organic light-emitting diode is commonly used because of high efficiency and good color purity than bottom - emission organic light-emitting device. Unlike BEOLED, TEOLED contain semi-transparent metal cathode. Because of semi-transparent cathode, micro cavity effect occurs in TEOLED. We optimized this effect by changing the thickness of hole injection layer. Device consists of is indium-tin-oxide / N,N'-Di-[(1-naphthyl)-N,N'-diphenyl]-1,1'-biphenyl-4,4'-diamine (x nm) / tris-(8-hydroxyquinoline) aluminum (50nm) / LiF(0.5nm) / Mg:Ag (1:9), and we changed NPB thickness which is used as HTL in our device in order to study how micro cavity effects are changed by optical path. As the results, NPB thickness at 35nm showed the current efficiency of 8.55Cd/A.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.206-206
• /
• 2011

투명 전도성 산화물 (TCO, Transparent Conductive Oxide) 박막을 태양전지에 적용하기 위해서는 우수한 전기 전도성 및 가시광 영역에서 높은 투과율을 가져야 한다. 대표적인 TCO 물질인 ITO (Indium tin oxide) 박막은 우수한 전기적, 광학적 특성을 가지고 있지만 $400^{\circ}C$ 이상의 고온에서는 전기저항이 급격히 증가하게 되어 실제 태양전지 패널에 적용했을 때 전기적 특성이 저하된다. 따라서 태양전지용 TCO 박막을 개발 시, 뛰어난 고온 안정성이 요구되고 있다. 본 연구에서는 고온 안정적 특성을 지니는 Ga3+를 도핑한 ZnO 계열 TCO인 GZO/ITO multi-layered 박막을 증착하였다. 또한 buffer layer의 두께 변화 및 구조 제어를 통한 최위층 박막의 전기적 특성 및 결정성을 조사하였으며 다층 박막의 계면 간 특성 및 굴절률 제어를 통한 광학적 물성을 연구하였다.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.290-293
• /
• 2015

The properties of the IZTO thin films on the glass were studied with a variation of the $SiO_2$ buffer layer thickness. $SiO_2$ buffer layers were deposited by plasma-enhanced chemical vapor deposition (PECVD) on the glass, and the In-Zn-Tin-Oxide (IZTO) thin films were deposited on the buffer layer by RF magnetron sputtering. All the IZTO thin films with the $SiO_2$ buffer layer are shown to be amorphous. Optimum $SiO_2$ buffer layer thickness was obtained through analyzing the structural, morphological, electrical, and optical properties of the IZTO thin films. As a result, the IZTO surface roughness is 0.273 nm with a sheet resistance of $25.32{\Omega}/sq$ and the average transmittance is 82.51% in the visible region, at a $SiO_2$ buffer layer thickness of 40 nm. The result indicates that the uniformity of surface and the properties of the IZTO thin film on the glass were improved by employing the $SiO_2$ buffer layer and the IZTO thin film can be applied well to the transparent conductive oxide for display devices.

• 분석과학
• /
• 제5권1호
• /
• pp.135-142
• /
• 1992

태양열은 투과되고 인체 및 내부 열원에서 발생하는 적외선은 내부로 반사시키는 산화인듐 주석막은 수동 태양열 포집기로 사용되어 에너지 절약용 창유리로 활용된다. 졸겔 담금 코팅으로 제조된 산화 인듐 주석막의 선택 흡수 투과 특성의 막의 두께, 열처리 조건, 기판의 영향을 UV-VIS-IR spectroscopy를 이용하여 관찰하였다. 졸겔 담금 코팅막은 $500^{\circ}C$, 환원 분위기에서 열처리하면 고유의 산화 인듐 주석막이 형성된다. 알칼리 이온 확산 방지막은 $SiO_2-ZrO_2$막은 태양에너지 투과 효율을 증진시킨다. $SiO_2-ZrO_2/ITO$막은 태양 에너지의 투과를 유지시키고 파장 2700 nm 이상에서의 내부열 방출을 억제하여 에너지 절약 특성을 갖는다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.213-213
• /
• 2000

A sensor system which can measure the transmittance of ITO(Indium Tin Oxide) layed glass is proposed. The sensor system includes a single wavelength laser beam source, photo diodes and electronic circuit processing sensor signal. The wavelength of laser is 543.5 m, this is most sensitive wavelength to photopic and scotopic vision. We applied the sensor to measure transmittance of ITO layer on general manufacturing environment and verified the effectiveness of sensor through experimental measurement.

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.351-356
• /
• 2017

Tin dioxide nanoparticles are prepared using a newly developed synthesis method of plasma-assisted electrolysis. A high voltage is applied to the tin metal plate to apply a high pressure and temperature to the synthesized oxide layer on the metal surface, producing nanoparticles in a low concentration of sulfuric acid. The particle size, morphology, and size distribution is controlled by the concentration of electrolytes and frequency of the power supply. The as-prepared powder of tin dioxide nanoparticles is used to fabricate a gas sensor to investigate the potential application. The particle-based gas sensor exhibits a short response and recovery time. There is sensitivity to the reduction gas for the gas flowing at rates of 50, 250, and 500 ppm of $H_2S$ gas.