• The Plant Pathology Journal
• /
• v.23 no.4
• /
• pp.272-280
• /
• 2007

Isolates of Cucumber mosaic virus (CMV) collected in Korea, were compared with their pathological features in tobacco and zucchini squash. Full-length cDNA clone of RNA3 was generated by using long-distance RT-PCR. Transcript RNA3 from the cDNA clone was inoculated onto host plants with transcripts RNA1 and RNA2 of Fny strain, generating RNA3-pseudorecombinant CMV. Timing and severity of systemic symptom was not significantly different among the pseudorecombinant CMVs in tobacco, compared with strains Fny-CMV and Pf-CMV. However, the pseudorecombinant CMVs induced two different systemic symptoms (mosaic vs. chlorotic spot) in zucchini squash. Based on symptom induction, the pseudorecombinant CMVs were categorized into two classes. The severity and timing of symptoms were correlated with viral RNA accumulations in systemic leaves of zucchini squash, suggesting that different kinetics of virus movement associated with CMV proteins are crucial for systemic infection and symptom development in zucchini squash. The analysis of movement proteins (MP) of CMV strains showed high sequence homology, but the differences of several amino acids were found in the C-terminal region between Class-I-CMV and Class-II-CMV. The analysis of coat proteins (CP) showed that the CMV isolates tested belonged to CMV subgroup I and the viruses shared overall 87-99% sequence identity in their genomes. Phylogenetic analysis of MP and CP suggested that biological properties of Korean CMV isolates have relationships associated with host species.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.185-194
• /
• 2007

WiBro has become intentionally standardize as IEEE 802.16e. This WiBro service has been started by a portable internet at home as well as abroad. In this paper, an offender hacker do not direct attack on system on system that It marched an attack directly in damage system because a place oneself in mobile station of portable internet WiBro and avoid to attack hacker's system. At this time, a mobile make use of network inspection policy for back-tracking based on log data. Used network log audit, and presented TCP/IP bases at log bases as used algorithm, the SWT technique that used Thumbprint Algorithm. Timing based Algorithm, TCP Sequence number. Study of this paper applies algorithm to have been progressed more that have a speed to be fast so that is physical logical complexity of configuration of present Internet network supplements a large disadvantage, and confirm an effective back-tracking system. result of research of this paper contribute to realize a back-tracking technique in ubiquitous in WiBro internet network.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.5
• /
• pp.25-36
• /
• 2022

This paper proposes a random sign reversal technique in space frequency block code for single carrier modulation. The traditional space time and frequency block coding technique may be confronted with radio environments openly, severe radio hijacking problems are to be overcome. In order to avoid such an open radio issue, random coded data protection technique for space-time block code was proposed, but this algorithm can change channel combination per an Orthogonal Frequency Division Multiplexing block. This kind of slow switching increases the probability that nearby receivers will detect the transmitted data. This paper proposes a fast switching algorithm per data symbols' basis which is a random sign reversal technique in space frequency block code for Single Carrier Modulation. It is shown in simulation that the proposed one has a superior performance in comparison with the performance of the receiver which do not know the random timing sequence of sign reversal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2A
• /
• pp.169-178
• /
• 2007

In this paper, we propose a signal structure and its optimum receiver to improve performance of SC-FDE(Single Carrier with Frequency Domain Equalization) system. Conventional SC-FDE systems have a drawback of power unbalance in frequency domain due to generation of pilot signals in time domain. The unbalanced power in frequency domain induces a channel estimation error and the performance of the receiver is degraded significantly. To overcome the drawback we apply CAZAC sequence which has constant power distribution in time and frequency domain. We design the signal structure to improve the performance with the repeated CAZAC sequence, and we design a receiver to optimize the proposed structure. Computer simulation results show that the proposed structure is superior to the conventional structure considering frame synchronization, frequency synchronization and channel equalization on typical wireless mobile channel environment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.290-297
• /
• 2014

The synchronization of OFDM receiver is consisted of symbol timing offset(STO) estimation in time domain and carrier frequency offset(CFO) estimation in frequency domain. This paper proposes new algorithm for correcting the integer CFO after we have done correcting the STO and partial CFO. ICFO must be corrected, since the ICFO lead to degrade bit error rate(BER) of demodulation performance. The PN sequence has information which is subcarrier order since the modified PN sequence, length is same subcarrier, is used in this paper and is modulated each subcarrier by each chip. Thus the receiver track phase of PN sequence after FFTin order to find the subcarrier frequency offset. The proposed algorithm is faster and more simple than convenient methode as measuring carrier energy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.479-486
• /
• 2008

In this paper, an efficient training symbol design with m-sequence is proposed for the MIMO-OFDM based next generation wireless transmission system which supports gigabits per second data rate. In the traditional blute force method, the preamble design is based on the case by case comparison with the system requirements. This paper discusses a training symbol design methodology for the MIMO-OFDM system based on the m-sequence which has been widely used in the spread spectrum communication areas due to its good correlation characteristics. Also the step-by-step design and performance verification method within the limited search space is discussed. The proposed method targets the design of the training symbol which satisfies system requirements for the packet based MIMO-OFDM wireless communication system including automatic gain control(AGC), timing synchronization, frequency and sampling offset estimation, and MIMO channel estimation.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.161-171
• /
• 2015

Alternative binary offset carrier (AltBOC) signals can be approximated by four synchronized direct sequence spread spectrum (DSSS) signals, each pair of which is a quadrature phase shift keyed (QPSK) signal at a different frequency. Therefore, depending on the strength of an incoming AltBOC signal, an acquisition technique can reduce the mean acquisition time (MAT) by searching the four DSSS signals asynchronously; the search for each of the four DSSS signals can start at one of the evenly separated hypotheses on the two-dimensional hypothesis space. And detection sensitivity can be improved by multiple levels when different numbers of search results for the same hypothesis are combined. In this paper, we propose a fast AltBOC acquisition technique that has an asynchronous search strategy and efficiently utilizes the output of the four search results to increase the sensitivity level when sensitivity improvement is needed. We provide a complete theoretical analysis and demonstrate with numerous Monte Carlo simulations that the MAT of the proposed technique is much smaller than conventional AltBOC acquisition techniques.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.151-160
• /
• 2015

GPS L2C signal is a recently added civil signal to L2 frequency and is constructed by time division multiplexing of civil moderate (L2-CM) and civil long (L2-CL) code signals. While the L2-CM code is 20 ms-periodic and modulates satellite navigation message, the L2-CL code is 1.5s-periodic with 767,250 chips long code sequence and carries no data. Therefore, the L2-CL code signal allows receivers to perform a very long coherent integration. However, due to the length of the L2-CL code, the acquisition of the L2-CL code signal may take too long or require too much hardware resources. In this paper, we propose a three-step ultra-fast L2-CL code acquisition (TSCLA) technique for dual band GPS receivers. In the proposed TSCLA technique, a dual band GPS receiver sequentially acquires the coarse/acquisition (C/A) code signal at L1 frequency, the L2-CM code signal, and the L2-CL code signal to minimize mean acquisition time (MAT). The theoretical performance analysis and numerous Monte Carlo simulations show the significant advantage of the proposed TSCLA technique over conventional techniques introduced in the literature.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.1
• /
• pp.1-10
• /
• 2014

Recently, monitoring of two-body ground vehicles carrying extremely hazardous materials has been considered as one of the most important national issues. This issue induces large cost in terms of national economy and social benefit. To monitor and counteract accidents promptly, an efficient methodology is required. For accident monitoring, GPS can be utilized in most cases. However, it is widely known that GPS cannot provide sufficient continuity in urban cannons and tunnels. To complement the weakness of GPS, this paper proposes an accident monitoring method based on a monocular vision sensor. The proposed method estimates angular acceleration from a sequence of image frames captured by a monocular vision sensor. The possibility of using angular acceleration is investigated to determine the occurrence of accidents such as jackknifing and rollover. By an experiment based on actual measurements, the feasibility of the proposed method is evaluated.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.305-314
• /
• 2012

The purpose of this study was to investigate the effects of joint kinetics and coordination on within-individual differences in maximum vertical jump. 10 male subjects aged 20 to 30 performed six trials in maximum vertical jump and with based on jump height the good(GP) and bad(BP) performances for each subject were compared on joint kinetics of lower extremity and coordination parameters such as joint reverse and relative phase. The results showed that maximum moment, power, and work done of hip joint and maximum moment of ankle joint in GP were significantly higher than that in the BP but no significant differences for the knee joint. We could observe a significant difference in joint reverse timing between both conditions. And also the relative phase on ankle-knee and ankle-hip in GP were significantly lower than that in the BP, which means that in GP joint movements were more in-phase synchronized mode. In conclusion, mechanical outputs of hip and ankle joints had an effect on within-individual differences in vertical jump and the inter-joint coordination and coordination including sequence and timing of joint motion also might be high influential factors on the performances within individual.