• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.1
• /
• pp.29-34
• /
• 2015

DC bus electrolytic capacitors are used in variety of equipments as smoothing element of the power converters because it has high capacitance for its size and low price. It is responsible for frequent breakdowns of many static converters and inverter drive systems. Therefore it is important to diagnosis monitoring the condition of an electrolytic capacitor in real-time to predict the failure of power converter. In this paper, the on-line remote diagnosis monitoring system for DC BUS electrolytic capacitors of power converter using low-cost type Zigbee communication modules is developed. To estimate the health status of the capacitor, the equivalent series resistor(ESR) of the component has to be determined. The capacitor ESR is estimated by using RMS computation using AC coupling method of DC link ripple voltage/current. The Zigbee communication-based experimental results show that the proposed remote DC capacitor diagnosis monitoring system can be applied to DC/DC converter and UPS successfully.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_2
• /
• pp.773-779
• /
• 2019

We developed the automatic ground deformation monitoring system using Sentinel-1 satellites which is operating by European Space Agency (ESA) for the Korea Peninsula's ground disaster monitoring. Ground deformation occurring over a long-term period are difficult to monitoring because it occurred in a wide area and required a large amount of satellite data for analysis. With the development of satellites, the methods to regularly observe large areas has been developed. These accumulated satellite data are used for time series ground displacement analysis. The National Disaster Management Research Institute (NDMI) established an automation system for all processes ranging from acquiring satellite observation data to analyzing ground displacement and expressing them. Based on the system developed in this research, ground displacement data on the Korean Peninsula can be updated periodically. In the future, more diverse ground displacement information could be provided if automated small regional analysis systems, multi-channel analysis method, and 3D analysis system techniques are developed with the existing system.

• Convergence Security Journal
• /
• v.18 no.5_1
• /
• pp.33-43
• /
• 2018

In this paper, we want to solve the problems that users want to search the progress of attack, continuity of attack, association between attackers and victims, blocking priority and countermeasures by using visualization interface with multi-rotational axis and radial axis structure. It is possible to effectively monitor and track security events by arranging a time series event based on a multi-rotational axis structured by an event generation order, a subject of an event, an event type, and an emission axis, which is an objective time indicating progress of individual events. The proposed interface is a practical visualization interface that can apply attack blocking and defense measures by providing the progress and progress of the whole attack, the details and continuity of individual attacks, and the relationship between attacker and victim in one screen.

• Korean Journal of Remote Sensing
• /
• v.29 no.4
• /
• pp.351-360
• /
• 2013

Harmonic analysis enables to characterize patterns of variation in MODIS NDVI time series data and track changes in ground vegetation cover. In harmonic analysis, a periodic phenomenon of time series data is decomposed into the sum of a series of sinusoidal waves and an additive term. Each wave is defined by an amplitude and a phase angle and accounts for the portion of variance of complex curve. In this study, harmonic analysis was explored to tract ground vegetation variation through time for land-cover vegetation change detection. The process also enables to reconstruct observed time series data including various noise components. Harmonic model was tested with simulation data to validate its performance. Then, the suggested change detection method was applied to MODIS NDVI time series data over the study period (2006-2012) for a selected test area located in the northern plateau of Korean peninsula. The results show that the proposed approach is potentially an effective way to understand the pattern of NDVI variation and detect the change for long-term monitoring of land cover.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.19-27
• /
• 2022

In this study, we propose a language and platform to describe and manage the MLOps(Machine Learning Operations) workflow for time series data anomaly detection. Time series data is collected in many fields, such as IoT sensors, system performance indicators, and user access. In addition, it is used in many applications such as system monitoring and anomaly detection. In order to perform prediction and anomaly detection of time series data, the MLOps platform that can quickly and flexibly apply the analyzed model to the production environment is required. Thus, we developed Python-based AI/ML Modeling Language (AMML) to easily configure and execute MLOps workflows. Python is widely used in data analysis. The proposed MLOps platform can extract and preprocess time series data from various data sources (R-DB, NoSql DB, Log File, etc.) using AMML and predict it through a deep learning model. To verify the applicability of AMML, the workflow for generating a transformer oil temperature prediction deep learning model was configured with AMML and it was confirmed that the training was performed normally.

• Membrane and Water Treatment
• /
• v.14 no.4
• /
• pp.155-162
• /
• 2023

Global climate change and urbanization have various demerits, such as water pollution, flood damage, and deterioration of water circulation. Thus, attention is drawn to Nature-based Solution (NbS) that solve environmental problems in ways that imitate nature. Among the NbS, urban wetlands are facilities that perform functions, such as removing pollutants from a city, improving water circulation, and providing ecological habitats, by strengthening original natural wetland pillars. Frequent monitoring and maintenance are essential for urban wetlands to maintain their performance; therefore, there is a need to apply the Internet of Things (IoT) technology to wetland monitoring. Therefore, in this study, we attempted to develop a real-time wetland monitoring device and interface. Temperature, water temperature, humidity, soil humidity, PM1, PM2.5, and PM10 were measured, and the measurements were taken at 10-minute intervals for three days in both indoor and wetland. Sensors suitable for conditions that needed to be measured and an Arduino MEGA 2560 were connected to enable sensing, and communication modules were connected to transmit data to real-time databases. The transmitted data were displayed on a developed web page. The data measured to verify the monitoring device were compared with data from the Korea meteorological administration and the Korea environment corporation, and the output and upward or downward trend were similar. Moreover, findings from a related patent search indicated that there are a minimal number of instances where information and communication technology (ICT) has been applied in wetland contexts. Hence, it is essential to consider further research, development, and implementation of ICT to address this gap. The results of this study could be the basis for time-series data analysis research using automation, machine learning, or deep learning in urban wetland maintenance.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.268-273
• /
• 1998

This study applies an on-line system, which employes an adaptive reconstruction technique to monitor and forecast ocean surface changes. The system adaptively generates an appropriate synthetic time series with recovering missing measurements for sequential images. The reconstruction method incorporates temporal variation according to physical properties of targets and anisotropic spatial optical properties into image processing techniques. This adaptive approach allows successive refinement of the structure of objects that are barely detectable in the observed series. The system sequentially collects the estimated results from the adaptive reconstruction and then statistically analyzes them to monitor and forecast the change in surface characteristics.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.33-39
• /
• 2012

The tool wear and failure in automatic production system directly influences the quality and productivity of a product, thus it is essential to monitor the tool state in real time. For such purpose, an ART2-based remote monitoring system has been developed to predict the appropriate tool change time in accordance with the tool wear, and this study aims to experimently find the relationship between the tool wear and the monitoring signals in cutting processes. Also, the roughness of workpiece according to the wool wear is examined. Here, the tool wear is indirectly monitored by signals from a vibration senor attached to a machining center. and the wear dimension is measured by a microscope at the start, midways and the end of a cutting process. A series of experiments are carried out with various feedrates and spindle speeds, and the results show that the sensor signal properly represents the degree of wear of a tool being used, and the roughnesses measured has direct relation with the tool wear dimension. Thus, it is concluded that the monitoring signals from the vibration sensor can be used as a useful measure for the tool wear monitoring.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.39-45
• /
• 2006

This paper describes an effective and fast algorithm for GPS carrier-phase ambiguity resolution (AR) which can apply for structure monitoring, and a series of simulation analyses have been carried out to demonstrate the performance of the algorithm. The results show that single-frequency AR performance is significantly improved In term of Time-To-Fix-First (TTFF) ambiguity.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.2
• /
• pp.93-101
• /
• 2016

This paper presents the results obtained using time-series-based methods for structural damage assessment. The methods are applied to a wind turbine blade structure subjected to fatigue loads. A 9 m CX-100 (carbon experimental 100 kW) blade is harmonically excited at its first natural frequency to introduce a failure mode. Consequently, a through-thickness fatigue crack is visually identified at 8.5 million cycles. The time domain data from the piezoelectric active-sensing techniques are measured during the fatigue loadings and used to detect incipient damage. The damage-sensitive features, such as the first four moments and a normality indicator, are extracted from the time domain data. Time series autoregressive models with exogenous inputs are also implemented. These features could efficiently detect a fatigue crack and are less sensitive to operational variations than the other methods.