• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.5
• /
• pp.511-519
• /
• 2016

Shale gas has become increasingly important as a viable alternative to conventional gas resources. However, one of the critical issues in the development of shale gas is the generation of produced water, which contains high concentration of ionic compounds (> TDS of 100,000 mg/L). Accordingly, membrane distillation (MD) was considered to treat such produced water. Experiments were carried out using a laboratory-scale direct contact MD (DCMD). Synthetic produced water was prepared to examine its fouling propensity in MD process. Antiscalants and in-line filtration were applied to control fouling by scale formation. Fouling rates (-dJ/dt) were calculated for in-depth analysis of fouling behaviors. Results showed that severe fouling occurred during the treatment of high range produced water (TDS of 308 g/L). Application of antiscalant was not effective to retard scale formation. On the other hand, in-line filtration increased the induction time and reduced fouling.

• Clinical and Experimental Pediatrics
• /
• v.61 no.10
• /
• pp.322-326
• /
• 2018

Purpose: The EDIN scale (${\acute{E}}chelle$ Douleur Inconfort Nouveau-$N{\acute{e}}$, neonatal pain and discomfort scale) and heart rate variability has been used for the evaluation of prolonged pain. The aim of our study was to assess the value of the newborn infant parasympathetic evaluation (NIPE) index and EDIN scale for the evaluation of prolonged pain in preterm infants with chest tube placement due to pneumothorax. Methods: This prospective observational study assessed prolonged pain in preterm infants with a gestational age between 33 and 35 weeks undergoing installation of chest tubes. Prolonged pain was assessed using the EDIN scale and NIPE index. Results: There was a significant correlation between the EDIN scale and NIPE index (r=-0.590, P=0.003). Prolonged pain is significantly more severe in the first 6 hours following chest tube installation (NIPE index: 60 [50-86] vs. 68 [45-89], P<0.002; EDIN score: 8 [7-11] vs. 6 [4-8], P<0.001). Conclusion: Prolonged pain can be accurately assessed with the EDIN scale and NIPE index. However, evaluation with the EDIN scale is time-consuming. The NIPE index can provide instantaneous assessment of prolonged and continuous pain.

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.2
• /
• pp.101-111
• /
• 2010

Objectives : The purpose of this study was to investigate differences between traffic accident and non-traffic accident patients in the early stage, by analysis of the heart rate variability(HRV) and visual analogue scale(VAS). Methods : This study carried out on 38 patients who complained of nuchal or lower back pain. They have received hospital treatment in Dae-Jeon Univ. Cheonan Oriental Hospital. In the TA(Traffic accident) group, the pain caused by TA and in non-TA group, the pain caused by other reasons. We measured HRV and VAS twice(pre-treatment(Tx.) and post-Tx.). Then we analyzed the data. Results : As time goes by, patients who complained of pain showed the inclination to improve ability to balance autonomic nerve system. And fatigue and pain were improved. But they showed the inclination to increase stress index. At pre-Tx., TA group had more stress and worse ability to balance autonomic nerve system, but showed lower fatigue index than non-TA group. But, as time goes by, in TA group the fatigue and autonomic balance got worse. At pre-Tx., non-TA group complained of more severe pain than TA group, but at post-Tx., TA group complained of more severe pain than non-TA group. In other words, in TA group, the decreasing rate of pain was lower than non-TA group. Conclusions : Results from this investigation showed that TA have a negative effect on stress index, ability to balance autonomic nerve system, fatigue index and decreasing rate of pain. These results are expected to consider characteristics of patients who complained of pain caused by TA.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.147-153
• /
• 2017

Efficient texture representation is very important in computer vision fields. The performance of texture classification or/and segmentation can be improved based on efficient texture representation. Gabor filter is a representation method that has long history for texture representation based on multi-scale analysis. Gabor filter shows good performance in texture classification and segmentation but requires much processing time. In this paper, we propose new texture representation method that is also based on multi-scale analysis. The proposed representation can provide similar performance in texture classification but can reduce processing time against Gabor filter. Experimental results show good performance of our method.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.12
• /
• pp.435-440
• /
• 1983

The methods of forming the bus impedance matrix, which is mainly employed in fault analysis of power system, can be generally classified in catagories, (1) the one being the inverse matrix of bus admittance matrix, and (2) the other the bus impedance matrix succesive formation method by particular algorithms. The former method is theouetically elegant, but the formation and inverse of complex bus admittance matrix for large power system requires too much amounts of computer memory space and computing time. The latter method also requires too much memory space. Therefore, in this paper, an algorithm and computer program is introduced for the formation of a sparse bus impedance matrix which generates only the matching terms of the admittance matrix. So, this method can reduce the computer memory and computing time, and can be applied to fault analysis of large power system by small digital computer.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1036-1042
• /
• 2003

The hot embossing process has been mentioned as one of major nanoreplication techniques. This is due to its simple process, low cost, high replication fidelity and relatively high throughput. As the initial step of quantitating the embossing process , simple parametric study about embossing time have been carried out using high-resolution masters which patterned by the DRIE process and laser machining. Under the various embossing time, the viscous flow of thin PMMA films into microcavities during compression force has been investigated. Also, a study about simulating the viscous flow during embossing process has planned and continuum scale FDM analysis was applied on this simulation. With currently available test data and condition, simple FDM analysis using FLOW3D was made attempt to match simulation and experiment.

• Smart Structures and Systems
• /
• v.18 no.4
• /
• pp.733-754
• /
• 2016

Structural optimization involves a large number of structural analyses. When optimizing large structures, these analyses require a considerable amount of computational time and effort. However, there are specific types of structure for which the results of the analysis can be achieved in a much simpler and quicker way thanks to their special repetitive patterns. In this paper, frequency constraint optimization of cyclically repeated space trusses is considered. An efficient technique is used to decompose the large initial eigenproblem into several smaller ones and thus to decrease the required computational time significantly. Some examples are presented in order to illustrate the efficiency of the presented method.

• Journal of the Korean Dietetic Association
• /
• v.7 no.2
• /
• pp.144-152
• /
• 2001

This research reviews the characteristics of consumption oriented culture of post modern society and describes the food consumption culture based on the evaluative criteria pattern in eating in Ulsan Metropolitan City. The subjects consisted in 217 full-time housewives and 129 cooks. The evaluative criteria of eating scale with 4 components - the eating atmosphere factor, the preference factor, the quality factor and the table factor- is described and interpreted in the context of consumption oriented culture. 4 clusters were decided through cluster analysis; preference and quality pursuing type, high involvement type, consumerism culture pursuing type and low involvement type. Among socio-economic variables, the evaluative criteria pattern of eating was significantly associated with occupation. The results of factor analysis and cluster analysis proved that the full-time house wives and cooks in Ulsan Metropolitan city showed the propensity to consumption oriented culture in food consumption culture.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1549-1557
• /
• 2018

Optimizing the design of large-scale electric machines based on nonlinear finite element analysis (FEA) requires longer computation time than other applications of FEA, mainly due to the huge size of the machines. This paper addresses a new region decision method (RDM) with mesh adaptive direct search (MADS) for the optimal design of wind generators in order to reduce the computation time. The validity of the proposed algorithm is evaluated using Rastrigin and Goldstein-Price benchmark function. Moreover, the algorithm is employed for the optimal design of a 5.6MW interior permanent magnet synchronous generator to minimize the torque ripple. Additionally, mechanical stress analysis as well as electromagnetic field analysis have been implemented to prevent breakdown caused by large centrifugal forces of the modified design.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.23 no.2
• /
• pp.129-132
• /
• 2012

Background and Objectives : MPT is directly related to degree of glottal closure. So it is widely used in the assessment of glottal closure with unilateral vocal fold paralysis. But MPT could be influenced not only by glottal closure but also by pulmonary function. So MPT might not reflect glottal closure in UVFP with decreased pulmonary function. The purpose of the study is to evaluate usefulness of MPT and ratio of /s/ time to /z/ time before and after injection laryngoplasty in UVCP with decreased pulmonary function. Materials and Methods : This study involved 34 patients with unilateral vocal fold paralysis : with decreased pulmonary function in group A (n=15) : with normal pulmonary function in group B (n=19). All patients underwent injection laryngoplasty. Paramters of perceptual analysis, acoustic analysis, aerodynamic analysis, videostroboscopy were compared between two groups. Results : Breathness and asthenic scale, G scale of perceptual analysis were significantly improved in both groups. Glottal gap index were significantly decreased after injection in both groups. In aerodynamic analysis, MPT was improved after injection laryngoplasty in both groups, but S/Z ratio was improved only in group B. In correlation analysis, /s/ time was not correlated with pulmonary function. Conclusion : S/Z ratio reflects neither the pulmonary function nor the glottal clousure properly. MPT is more useful indicator than S/Z ratio to evaluate vocal fold paralysis even with decreased pulmonary function.